#1 Home Improvement Retailer

Internet #313176655

Model #48-20-9016

Store SKU #1005357122

5/16 in. x 4 in. x 6 in. SHOCKWAVE Carbide Hammer Drill Bit

  • Up to 5x life in concrete
  • Up to 2x faster drilling vs. standard masonry drill bits
  • SHOCKWAVE™ Impact Duty engineered for hammer drills and impacts
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Hammer drill bits with sharpened carbide for 5X longer life in concrete

Milwaukee Carbide Hammer Drill Bits

Hammer drill bits with sharpened carbide for 5X longer life in concrete

Ideal for concrete, brick, and block

Carbide Hammer Drill Bits

Ideal for concrete, brick, and block

Ideal for concrete, brick, and block

Carbide Hammer Drill Bits

Wide flute design removes dust faster and reduces heat

Up to 5x life in Concrete

Up to 5x life in Concrete

Up to 5x life in Concrete

Hammer Drill/Drivers and Impacts

For Use With

Hammer Drill/Drivers and Impacts

Vs. Standard Masonry Drill Bits

Up to 2x Faster Drilling

Vs. Standard Masonry Drill Bits

For less bit walking

Precision Ground Carbide Tip

For less bit walking

Carbide Hammer Drill Bits

Up to 5X Life in Concrete

Carbide Hammer Drill Bits

For Use In Concrete, Brick and Block

For Use In

For Use In Concrete, Brick and Block

Drilling in Concrete

Concrete

Drilling in Concrete

Drilling in Brick

Brick

Drilling in Brick

Drilling in Block

Block

Drilling in Block

For Longer Life in Concrete and Hard Aggregate

Durable Carbide Tip

For Longer Life in Concrete and Hard Aggregate

The Milwaukee 5/16 in. x 4 in. x 6 in. Carbide Hammer Drill Bit uses sharpened carbide to deliver up to 5x longer life in concrete and up to 2x faster drilling into masonry materials. Engineered with a precision ground tip, these masonry drill bits deliver faster starts and less walking in concrete, brick and block. The carbide-tipped masonry drill bits' wide flute design removes dust faster, reducing heat and delivering more holes per charge. Each bit is equipped with a 3-flat shank, providing users with better grip and control. The extended life of the Milwaukee Carbide Hammer Drill Bits provides the ideal solution in concrete, brick and block for cordless and corded hammer drill/drivers.
  • Durable carbide tip for longer life in concrete and hard aggregate
  • Sharpened carbide edges for faster starts in concrete, brick and block
  • Precision ground carbide tip for less bit walking
  • Wide flute design removes dust faster reducing heat & delivering more holes per charge
  • Ideal for concrete, brick and block
  • 1/4 in. hex shank for added tool versatility
  • Available in sizes up to 1/2 in.
  • Shop All Milwaukee Tools

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Assembled Depth (in.)
6 in
Assembled Height (in.)
0.3125 in
Assembled Width (in.)
0.3125 in
Bit Diameter
5/16 in
Bit Length (in.)
6
Shank Diameter
1/4 in

Details

Bit Material
Carbide
Drill Bit Type
Hammer Drill Bit
Drill Bit Type(s) Included
Hammer Drill Bit
Individual/Set
Individual
Material Application
Brick,Concrete
Returnable
90-Day
Self-Feeding
No
Shank Style
Hex
Tools Product Type
Power Tool

Questions & Answers

4Questions11Answers

Can I use this with a regular drill for concrete, or must I use it with a hammer drill?

Asked by KCal April 1, 2021
3
Answers

You can but it works better with hammer drill

how deep will a 4'"x 6"drill bit drill

Asked by Dave March 8, 2021
3
Answers

5" maybe

I dont have a hammer drill what kind if drill bit to use for masonry block wall

Asked by Jpl December 21, 2020
3
Answers

No issues was a lot easier using or buying this product

Can this be used with a regular drill?

Asked by Joey August 21, 2020
2
Answers

These types of drill bits work best with a hammer drill, but I was able to use mine with a regular drill to drill through both a clay pot and a concrete slab. Just don't let them overheat if you are drilling through concrete, and remove them periodically as you drill, to get out the debris in the hole, and you should be fine.

Customer Reviews

  • 4.6
    out of 253 reviews
  • 79% recommend this product
Filter by:
Showing 1-10 of 253 reviews
Used this to install some 12mm anchors in a concrete slab. Next time I would probably use a 1/2-...
Used this to install some 12mm anchors in a concrete slab. Next time I would probably use a 1/2-inch, instead of the 7/16-inch. This bit, in my Milwaukee M18 Fuel hammer drill made short work of installing the four anchors.
by aTypicalEngineer808
A great concrete drill bit to make short work of smaller holes. We got a new DIY MRCool AC unit a...
A great concrete drill bit to make short work of smaller holes. We got a new DIY MRCool AC unit and after the install I had to run the piping along the outside of our house, and I wanted to add a couple of ‘L’ brackets to give the piping support. But I needed to pre-drill the holes for the concrete screws. This drill bit is so fast, it is done almost as quickly as it gets started. Having used other drill bits, I can honestly say this bit is sooooooo much faster. It effortlessly drilled the holes and did not jump around either, once it got going it just dug in and got the job done! I am glad I got it and can't wait to use it again.
by DangerousDale
I needed to put some holes in the bottom of one of my wife's clay planters. These drill bits wor...
I needed to put some holes in the bottom of one of my wife's clay planters. These drill bits worked great. The first (5/32) drilled right through the pot while not cracking the clay. I then use the 1/8th size bit to increase the size of the hole. Now the water can come out of the bottom with ease. I also tried these two bits on a concrete slab I had poured for a base to a shed kit I got from Home Depot. I had previously ruined several older concrete bits, while drilling holes to secure the shed base. These bits went right through the concrete with no issues
by SaturdayMorningCutter
1 person found this helpful
I needed to put some holes in the bottom of one of my wife's clay planters. These drill bits work...
I needed to put some holes in the bottom of one of my wife's clay planters. These drill bits worked great. The first drilled right through the pot while not cracking the clay. I then use the 1/8th size bit to increase the size of the hole. Now the water can come out of the bottom with ease. I also tried these two bits on a concrete slab I had poured for a base to a shed kit I got from Home Depot. I had previously ruined several older concrete bits, while drilling holes to secure the shed base. These bits went right through the concrete with no issues.
by SaturdayMorningCutter
1 person found this helpful
These hammer drill bits do exactly what they are designed to do which is drill a clean hole in co...
These hammer drill bits do exactly what they are designed to do which is drill a clean hole in concrete, hard brick, or cinder block. I tested these bits with a hammer drill in both hammer and drill mode and an impact driver. For the most part, all drivers worked drilling the 3 materials except when hitting rock in the concrete. The hammer drill was the only driver that penetrated the rock without drifting and enlarging the hole. The hex drive was a nice feature allowing easy holding with a chuck as well as allowing them to be used with impact drivers. A nice bit that I will continue to use in the future.
by Steve
1 person found this helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Excelent tool for concrete drilling....
Excelent tool for concrete drilling.
by Luis
Great for the job I had to perform...
Great for the job I had to perform
by Radu
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Showing 1-10 of 253 reviews