6 in. 24 TPI Thin Metal Cutting SAWZALL Reciprocating Saw Blades (5-Pack)
Includes 5 units ($2.69 /unit)
$13.47
- Fast, Flexible Cuts In Metal
- 2X more life than our previous generation SAWZALL blades
- Tough Neck ribs strengthen the blade tang and minimize breakage
- View More Details
Product Details
Specifications
Questions & Answers
87Questions
Q:What is the Milwaukee part number on this blade, so I can find it in my local market. My local Home Depot does not carry this blade.
by|Mar 16, 2023
1 Answer
Q:Can this blade be used to cut a 7 inch diameter hole through 4 inch concrete.
I was planning to mark the 7 inch hole circumference. Then, drill a few 1/2 inch holes along this 7 inch circle as a starter hole for the reciprocal saw.
by|Feb 27, 2023
0 Answer
Q:Will this blade cut through a fiberglass shower
by|Jan 19, 2023
3 Answers
Q:Will this cut through #4 rebar?
by|Jan 8, 2023
1 Answer
Showing 1-4 of 87
Sep 13, 2022
Good quality and works as advertise
I have cut several cast iron pipes and the blade cut it smoothly, it took me like 2 minutes to cut each pipe.
by
Jun 2, 2021
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by
May 21, 2021
I needed these to cut some ABS sewer pipe I was installing. These fit my Sawzall and worked great...
I needed these to cut some ABS sewer pipe I was installing. These fit my Sawzall and worked great to get through the ABS. These do leave a little bit of a burr on the pipe so I was sure to file them off. Overall, I am happy with these blades. The are easy to use and cut through ABS pipe easily.
by
Jan 9, 2021
I am a commercial HVAC tech and use these to...
I am a commercial HVAC tech and use these to cut through thick shafts on blower wheel assemblies and they work great! Love anything Milwaukee makes!
by
Dec 13, 2020
Milwaukee....4 in 10 Teeth per in Multi Material Cutting Saw Blade. This is a great Reciprocatin...
Milwaukee....4 in 10 Teeth per in Multi Material Cutting Saw Blade. This is a great Reciprocating Saw blade for a Hackzall or a Sawzall. I like the shortness of the blade it makes it very easy to get into tight places. The blade is made of steel and the shortness of the blade keeps it from flexing or bending. I shortened the 4 legs on 3 bar stools made of poplar and had no problem cutting them. there are a variety of blades available depending on what you are going to cut. this is a great blade
by
May 5, 2020
The blade was way over priced. I used it for about an hour in older style sheet rock wall. One si...
The blade was way over priced. I used it for about an hour in older style sheet rock wall.
One side of the blade worn done totally on one side. I did not see a benefit to this blade, in sheet rock, as opposed to experimenting with other blades and/or manufacturers.
by
Aug 27, 2019
This is a fantastic price for a 10-blade pack of 9 inch demo blades. Sawzalls make quick work of...
This is a fantastic price for a 10-blade pack of 9 inch demo blades. Sawzalls make quick work of demolition or remodeling, where it is easy to slip the thin blade between the stud and plate to cut the nails and remove the stud. These work great for cutting metal screws, bolts and lumber, as well as metal and plastic pipes, wires, conduits, anchors, unistrut and lumber hangers. They seem to be super-hardened, so they last a long time before the teeth get worn down. The other problem that I often encounter is the blades getting bent. Since these are an inch wide, they hold their shape better, and allow bending back straight more often without snapping off.
The 9-inch long blade also means cutting completely through a 2x6 wall, including the finish material, all from one side. Demo work is hard on tools, and these take a lot of abuse before wearing out.
by
Aug 20, 2019
The Milwaukee Metal cutting blade called “The Torch” could replace a grinder or acetylene torch f...
The Milwaukee Metal cutting blade called “The Torch” could replace a grinder or acetylene torch for some specific cuts on mild steel. I decided to try “The Torch” blade instead of a grinder preparing a 4x4, ¼ inch thick sq. tube for a rocket stove. I made 3 cuts, 2 cuts along the edge of the tube and 1 cut across the tube. The saw blade tracked well, straight along the edges and straight across the top. I’ve attached pictures to tell that story.
“The Torch” blade I used was 9 inches in length and had 14 TPI. I detected essentially no wear with only 3 cuts. At ~$3 dollars a blade, these seem like a great value. I used 10-30w oil while making my cuts for lubrication and heat reduction. For projects like this, I have always used a grinder before with lots of sparks and noise. My normal set up for grinding work is outside the garage. This time, using “The Torch” I was inside the garage and only had metal cuttings to clean up. As blade technology improves so do our options. I would recommend “The Torch”, the Milwaukee metal cutting blade.
by
Aug 4, 2019
I recently used one of these blades in my Milwaukee reciprocating saw to cut through some lumber ...
I recently used one of these blades in my Milwaukee reciprocating saw to cut through some lumber previously used on the job site. The blades cut fast and true and even though I didn't cut through any nails, I did manage to slice through quite a few big staples with no problems. The blade stayed sharp with multiple cuts so I have confidence this 10 blade pack will last me quite a ling time.
by
Aug 3, 2019
Whether I am building, renovating or doing demolition; these blades are part of my tool arsenal. ...
Whether I am building, renovating or doing demolition; these blades are part of my tool arsenal. It seems I am always taking apart something that has nails or screws in the assembly. These blades do very well cutting through many types of metal. I've used them to cut through angle iron, aluminum and various other soft metals. They will cut through many different types of pipe materials. Also stainless steel plate/sheet metal.
by
Explore More on homedepot.com
Building Materials
Furniture
Outdoor Living
