AIR-TIP 1-1/4 in. - 2-1/2 in. Automotive Kit W/Crevice Tools, Utility Nozzle and Bag For Wet/Dry Shop Vacuums (4-Piece)

I used this kit several times mainly to clean vents around the house. The connection is not that great with my m12 hand vac. due to the angle of the port. I feel that this kit should also include an attachment to secure the connection between the vacs and the wands. This would help out tremendously with the suction. I used these attachments with other vacs from other brands and the connection was a lot better than with my M12 vac, again due to the angle( see photos). The bag is essentially 2 bags in one, with 2 separate compartments, I am using to store my impact sockets on one side and ratchets on the other to protect them during transport

Kit includes a fair amount of tools needed to clean your car or truck's interior There's a decently sized swivel head with 3 different brushes that snap on: one has soft bristles (cleaning plastic surfaces with lots of small nooks), another has slightly stiffer bristles, and the third is an interesting one as it has silicone bristles which I found very useful on carpets since it helps loosen whatever might be stuck in there. Two wands are also included, one has a very flexible tip and the other has a double sided bristle end that slides up and down or can be moved out of the way completely. My only real complaint is that the swivel head doesn't lock into any one position and I find that it rotates a little too easily. The ends of all 3 tools fit a number of different vacuum hose diameters. The kit works well with my M12 vacuum as well as an "orange" brand shop vac I have. Last but not least is the bag. It has more than enough room to store the included accessories in one half (there's room to spare!) which leaves the whole other half free for any other vacuum tools you may have on hand.

A great kit, especially for professional auto detailers. The Milwaukee Vacuum Accessory Kit (Model #49-90-2019) includes two crevice tools (one with a dual-brush tip), a utility scrubbing/shampooing nozzle (with 3 different brush pads) and a canvas carrying bag that accepts additional accessories. The scrubbing nozzle head rotates 360 degrees for better access. The bag, with two large zippered storage compartments, can be stored separately or clipped to the top of my 6-gallon Milwaukee M18 Vacuum head (where it, unfortunately, blocks the carrying handle of the vacuum.) It also has a zippered compartment for thin items (like manuals). The accessories securely fit 3 hose sizes: 1-1/4, 1-7/8, and 2-1/2 so can be used with almost any brand shop vacuum. The pieces are solid and strong – much thicker than typical vacuum accessories, so they are unlikely to break, crack, or flex even under extreme conditions. As such, the kit might be overkill for a typical DYI user, especially given the price. Price aside, it's a nice kit and made short work of vacuuming the inside of my pick-up, including dry-scrubbing the mats and carpets (I haven't wet-vac'd since I don't yet have the foam filter cover for the vacuum). I still use a separate dust-brush attachment for the dashboard and seats, an item I was disappointed not to find included in the kit. As much as I like the kit and the brand, I can't recommend it for casual users based upon the price. If money is no object or you do a lot of car detailing, then by all means this is for you.

These nozzles really make vacuuming convenient. I hate when I cannot get to those hard to reach spots or the stubborn to remove spots. These accessories definitely help with tackling that. I used my set to vacuum my vehicle and they worked perfectly. I liked that I could reach under and around the seats with ease. The swiveling palm tip worked solid with the carpeted floor. The brushes bristles really worked nicely kicking up any debris that was stubborn. The bag it comes with is huge. There is plenty of room to add other accessories as well. The pockets are customizable with Velcro. That really helps out when you get items of different sizes and shapes. Overall, the kit is perfect and if you enjoy cleaning your car like I do this kit is a good fit. Definitely recommended!

The bag will hold a lot; is a little bigger than I expected. It is a very high quality bag with adjustable dividers in each level and elastic straps with hooks to attach it to a Milwaukee shop vac. Oh, and there is a zipper pocket to hold flat things like paperwork, vacuum bags or belts. The fittings are great. I thought that red Milwaukee vacuum attachments were only for professional cleaners, but these have ambidextrous fittings so they fit on my huge 2 ½” shop vac hose AND on my indoor built-in vacuum hose! These fittings are sturdy and durable and designed for professional cleaners who need tools that work the first time and every time and don’t need constant adjustments to keep working. These are well-designed attachments. The flexible crevice tool is stiff enough to keep its shape, but does bend when needed. The other crevice tool can be used 3 ways: with no brush, with the stiff brush, or flip it over for a very soft, gentle brush that works great inside the cup holders in my minivan. I think they call the 3rd attachment a “utility” nozzle. I like it the best. I can use it with no brush, a rubber brush or the stiff or soft bristle brushes, but the most innovative feature is the handle so you can hold it firmly to maneuver it around. The head even swivels. Also, it is okay to hold it on the red handle because the hose isn’t going to drop off. It goes on easily, but also stays on until you pull it off. My husband loves the softest brush. He put the utility nozzle t on the end of a long wand to gently vacuum the window screens on our highest windows 9 feet up. In summary, this set is going to see a lot of work not only at job sites, and in the garage, but also inside the house and in our cars.

I think Milwaukee went over the top on the case to hold the tools. Its very impressive but not sure how practical it is. It has extra space to add tools. There are two sides. Again not very practical to flip it over. It would be useful if your traveling with the tools and want to impress your clients with the case. A single large bin would have been better I think. The tools themselves are typical Milwaukee, top notch quality. Design is thoughtful. The flexible rubber crevice tool prevents scratching. The brush crevice tool has a soft side and a stiffer side. The iron shaped swivel brush has 3 attachments that work well and remove easily. A stiff brush for carpet, soft brush for the dash to dust and a rubber for water I believe. The attachment fits all 3 size hoses very well. Use the plug in wet dry vacuum for larger jobs or a battery powered portable for quick cleanups.

The Milwaukee AIR-TIP3-Piece Automotive Vacuum Tool Kit is an ideal mix for interior car detail cleaning. However, it could be used to detail shop equipment, furniture, etc. Included are a swiveling palm brush, 3-in-1 Crevice and Brush Tool, a flexible long reach crevice tool, and a vacuum tool storage bag. The swiveling palm brush has a swiveling palm grip for more cleaning leverage and easier movement on automotive carpets. Each vacuum tool in this automotive cleaning kit is compatible with other wet/dry vacuum brands with 1-1/4 inch, 1-7/8 inch, and 2-1/2 in. diameters. The bag is extremely well made quality material with 2 zippers compartment s. There is plenty of space to add additional supplies (towels, wax, soap, etc.) so you have everything in one convenient carrying bag.

The rubber crevice tool is amazing. It got stuff that has been piling up from years ago. The other tools did a decent job of picking up dog air but still not as good as removing floor mats and using the house vacuum. The case is really big and has a lot of room to grow. If these are the only tools you plan to get, the case is going to be too big. I received this Milwaukee AIR-TIP 1-1/4 in. - 2-1/2 in. Automotive Kit W/Crevice Tools for free to write this reivew.

These are not your normal vacuum attachments. You get three attachments. 1. A palm brush that swivels, allowing one to push it firmly into carpets to dislodge dirt that has been tramped into the fibers. This attachment also comes with three different brushes, - a rubbery ‘spike’ one, plus two bristle brushes with firm and soft bristles. 2. A flexible long reach crevice tool that is great for getting down between car seats and other generally inaccessible places. It has a black rubbery flexible end. 3. A crevice tool that has a very nice dual ended brush (soft and hard bristles) that is mounted on the tool. When you need bristles on the end you simply slide it down and clips hold it in place. When no longer needed, release the clips and slide it up again where it clips in place again. To use the other type of bristle one can slide it off the end of the crevice tool and slide it back on the other way. They are all clearly very well designed and manufactured. The attachments all accept hoses sized 1-¼” , 1-⅞”, and 2-½”. The incredible bag is almost “over the top” for these attachments, but it is designed to clip onto the top of the M18 vacuum cleaners so it is probably designed and built as a generic bag. It has two levels, each of which close with a heavy duty zipper. The lower section has internal dividers that can be repositioned. The upper level also has a place for documents or small items. Metal zips can be locked together, and a pair of carry handles make it into an incredible bag for carrying almost anything. Made in China Lifetime warranty on the bag.

This review is for the model 49-90-2019 Milwaukee vac tool storage bag. Sometimes reviews of different models get lumped together; it’s good to know which model the review is referring to. This bag comes with no attachments or shoulder strap. There are carry handles, though. See photos. Fit and finish is top notch, and there’s more padding than I had expected. The bag offers attachment hooks for locking onto various models of Milwaukee vacuums – specifically the 0910-20, 0920-22HD, 0910-21HD, 0931-20, 0920-20, and the 0931-22HD models. There are two large compartments in the bag plus a zippered compartment suitable for paperwork, paper vac filters, etc. One compartment has moveable (or removable) partitions, while the other has permanently sewn-in partitions for securing and separating the various accessories carried in the bag. The zippers are robust in construction and are constructed of all metal; no plastic zipper pulls here. I’m not attaching the bag to any of the Milwaukee vacuums; for me it’s a stand-alone storage bag. It offers good protection while simultaneously keeping all of the bits and pieces together and in plain sight; no more storing my vac attachments and associated items in a bucket on top of a storage cabinet. Of course, the Milwaukee bag is targeted more toward pros than homeowners/DIY’ers, but I’m finding it pretty useful anyway.