#1 Home Improvement Retailer

Internet # 319396300

Model # 2540-20-48-11-2411

M12 12-Volt 23-Gauge Lithium-Ion Cordless Pin Nailer with Two M12 12-Volt 1.5 Ah Lithium-Ion Compact Battery Packs

$279.00
Apply Now
Pay $254.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Most compact cordless pin nailer
  • Consistent, clean pin nail holes
  • Part of the M12 System, featuring over 125+ tools
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Milwaukee M12 23-Gauge Pin Nailer is the most compact cordless pin nailer, combining precision and power to deliver the performance that professional carpenters and remodelers demand, without the hassle of a compressor hose or gas cartridge. The 23-Gauge pin nailer provides users with unmatched productivity and accessibility in tight spaces and confined corners with a lightweight, ergonomic design. The nitrogen air spring mechanism allows the nailer to consistently sink pin nails at proper depth into hard or softwoods while leaving small, clean nail holes. The double-action trigger and non-marring precision point tip allow users to perform sequential driving and accurate pin placement into delicate trim pieces. The dry-fire lockout feature prevents misfires and workpiece damage. The M12 Pin Nailer drives 23-Gauge headless pin nails ranging in length from 1/2 in. to 1-3/8 in. and features all-day run time with up to 750 pin nails per charge when paired with an M12 REDLITHIUM CP1.5 battery pack. This battery-powered pin nailer also features a magazine reload indicator, tool-free drive depth adjustment, reversible belt clip, LED light, battery fuel gauge, secondary work contact tip, and carries an industry-leading 5-year limited power tool warranty. Milwaukee REDLITHIUM batteries are the next generation in Lithium-Ion technology.

Highlights

  • Double-action trigger for sequential driving
  • No pneumatic hose or gas cartridge
  • Compatible with 1/2 in. to 1-3/8 in. 23-Gauge headless pin nails
  • Up to 750 pin nails per charge
  • Tool free drive depth adjustment
  • 2 interchangeable, non-marring, precision point tips included
  • Magazine reload indicator and dry fire lockout mechanism
  • LED light for increased visibility
  • Reversible belt clip
  • Fits all M12 batteries
  • Includes: (1) M12 23GA pin nailer, (2) 48-11-2401 M12 REDLITHIUM-ion compact battery






  • Click here for more information on Electronic Recycling Programs
  • Return Policy

Product Information

Internet # 319396300

Model # 2540-20-48-11-2411

Additional Resources

Shop All Milwaukee

Specifications

Dimensions: H 7.7 in, W 2.6 in, D 8.7 in

Dimensions

Battery Charge Time (Hours)

.5

Nail Angle

0 degree

Nail Gauge

23 gauge

Product Depth (in.)

8.7 in

Product Height (in.)

7.7 in

Product Width (in.)

2.6 in

Details

Air Tool Type

Air Nailer

Battery Amp Hours

1.5 Ah

Battery/Charger

(2) 1.5 Ah Batteries Included

Charger Included

Charger Not Included

Condition

New

Cord Style

Cordless

Cordless/Corded

Cordless

Firing Mode

Single Sequential

Included

No additional components or accessories are included

Loading type

Strip

Magazine Capacity

110

Maximum Fastener Size

1-3/8 in

Minimum Fastener Size

1/2 in

Motor Type

Brushed

Multi-Purpose

Single Purpose

Nailer Features

No Features

Number of Total Batteries Included

2

Power Type

Electric

Returnable

90-Day

Tool Weight (lb.)

3.3 lb

Tools Product Type

Air Tool

Voltage (v)

12v

Questions & Answers

56Questions
caret
Q:Why does this not come with a charger ??? Expensive and I have to buy a charger !
by|May 13, 2024
0 Answer
Answer This Question
caret
Q:What applications are good for a pin nailer vs a brad nailer?
by|Apr 20, 2024
1 Answer
Answer This Question

A:  Hello! We suggest using the M12 Pin Nailer for applications such as mitered corners, toe kicks, moldings, cabinetry, and delicate trims. The M18 FUEL Brad Nailer is for applications such as casings, shoe moldings, base boards, decorative moldings, and exterior trim. - Milwaukee Tool Social Team

by|Apr 26, 2024
    caret
    Q:Maximum brad length can the M-12 shoot?
    by|Jan 15, 2024
    1 Answer
    Answer This Question

    A:  The maximum pin nail it will utilize is 1/2" -1-3/8". - Milwaukee Tool, Social Team

    by|Jan 16, 2024
      caret
      Q:Will this 23-gauge Milwaukee use 2 inch pin nails?
      by|Jan 5, 2024
      1 Answer
      Answer This Question

      A:  It is compatible with 1/2" to 1-3/8" 23 Gauge Headless Pin Nails. - Milwaukee Tool, Social Team

      by|Feb 26, 2024
        Showing 1-4 of 56

        Customer Reviews

        4.7 out of 5

        • 4.7 out of 1,359 reviews
        • 89% recommend this product
        Filter by:
        Showing 1-10 of 1,359 reviews
        This tool is awesome! I have never done trim before, and this thing made me look like a pro. Except for some of the cuts, but that’s on me, not the tool. Ran over 250 pins, and the battery was still at 3/4 charge, so battery life isn’t an issue. The only pin that didn’t drive was one I hit a screw head with, again, not the tools’ fault, other than that, it was absolutely perfect!
        by
        • Verified Purchase
        Used this to install my new show molding. Excited for...
        Used this to install my new show molding. Excited for my next project. Love this tool. I have many Milwaukee M12 tools and they are worth the money.
        by
        • Verified Purchase
        Worked Great for a year
        I’m a cabinet finisher/ Installer. My company does a myriad of things with air pin nailers and cordless as well, shooting anywhere from 500 to 1500 1” pin nails per day. Gun worked really well at first, battery life is tremendous, had nice smooth power, lightweight. After about 5-6 months the gun started repeatedly jamming, even after dissemble and clean. Now it is inoperable due to the tongue on the nailer being stuck in ejection mode.
        by
        Response from Milwaukee ToolOct 4, 2022
        Thank you for taking the time to leave a review on your pin nailer. Could you send our team a message at socialmedia@milwaukeetool.com, so we can assist? Thank you - Social Team
          7 found this review helpful
          Perfect for woodworking and trim work
          For a lot of the work I do on a regular basis, I need to use a pin nailer to help keep pieces in a glue up together where a clamp will not work well or easily, or need to reattach trim I have removed to do some sort of fix. In the past I had to fire up my compressor, get out the long air hose, and then figure out if I had to move the compressor so I could reach where my work was, all for about 5 or 6 minutes of work. This Milwaukee cordless pin nailer has made these kind of projects so easy that doing them is a snap. The nailer is compact and very light weight and can get into spots I would normally have had trouble accessing (as compared to my other pneumatic nailers), and it is very quiet. Some of my first uses required I be up on a ladder to reattach some ceiling trim and it was extremely easy to use in a relatively precarious position (and I did not have to be concerned with an air hose). It feels good in the hand and allows precise location of where you want the pin to go. It drives the 23 gauge pins it uses cleanly; to date I have had no split wood, misfires, or bent pins. It gets a lot of work done on a single battery charge. The two stage trigger took a bit of getting used to (first time I have used one like this) but I found I liked it a lot the more I used it. The kit contains a soft case, tool, charger, and M12 battery and while it may be a bit pricey, you are getting Milwaukee quality in addition to the convenience this tool provides. Highly recommended; wish I had this a year ago!
          by
          • Recommended
          4 found this review helpful
          Wanted one for a long time
          I've wanted a pin nailer for a long time for adding trim to a piece of furniture. The 23-gauge pins are a lot easier to conceal as compared to my pneumatic 18-gauge brad gun. This also has the advantage of being battery powered, so I don't need to drag out the air hose and compressor. These drive the pins well, and there is a depth of drive controller wheel. However, I wasn't able to see much difference. The kit is very nice and includes the 12V battery, charger, and nailer in a nice carry case. I might recommend a "tool-only" version for people like me that already have Milwaukee 12V batteries and chargers. This uses 1/2" to 1-3/8" 23-gauge pin nails. I bought 3 different sizes of pin nails for less than $30. I think it will take a long time to use up 6000 pin nails. Nice features: window showing you have nails left (no dry firing), an LED light that shines on the nailing location, light weight, and a dual-action trigger system to prevent accidental firing. I highly recommend this product for anyone thinking about getting a pin nailer.
          by
          • Recommended
          4 found this review helpful
          Great tools
          I am extremely happy with all of my Milwaukee tools They are top quality tools. I have the 15 gauge finish nail gun and the 18 gauge brad nail gun and now the 23 gauge pin nail gun. The pin nail gun comes with a nice case with velcro straps to hold it securely in place. The kit also comes with the gun, 12v battery and a charger, easy to read directions. The only problem I have found with any of the cordless nail guns is the weight. The pneumatic guns are light weight but you have to drag around a compressor and hose with you. They are not that heavy so it's really not a problem. Highly recommend it.
          by
          • Recommended
          1 found this review helpful
          Milwaukee does it right!
          Just the presentation of this tool and its components are impressive. The nailer, charger, and battery are all included in a very nice storage case that will also hold a variety of nail sizes in a mesh pocket on the underside of the lid. I’m not sure if the battery needed a full charge, but it did charge within an hour. (I lost track of time.) I got this to use specifically for building some picture frames that require small fasteners and am really looking forward to this project and many more to come. I haven’t had the chance to use this yet, but I expect it to be top notch just like everything else made by Milwaukee.
          by
          • Recommended
          1 found this review helpful
          Solid tool
          Very solid and well packaged tool. I was very impress. I’m not the type of person who reads instructions so after charging the battery I just loaded it up and started using it to see how well this thing works. It was simple to load as you just lay in the nails (i.e., see photo) after you pull down on nail holder/magazine. I didn’t bother with adjusting nail depth but you can see it nailed flush with the thick piece of wood in the photo. No misfires and I like Milwaukee’s use of a trigger safety that is very easy to push down with your finger to activate the tool – very safe. This also turns on the LED light and battery level indicator too. Great features, light weight and solid feel. You can’t go wrong.
          by
          • Recommended
          3 found this review helpful
          Easy to use and consistent results
          This tool is well thought out and super easy to use. Being battery operated there is obviously no compressor or hoses to run. It is also fairly compact allowing it to fit into corners. Depth of pin can be set without tools, and the double trigger first turns on the LED light and virtually eliminates accidental double strikes. Supplied are 2 non mar point tips and a wrench to free pin jams, which so far I have not needed. The advertised up to 750 pins per battery charge seems accurate. There is a battery charge indicator, a dry fire lockout, and magazine reload indicator, Nail holes are very small, clean, and make for professional appearing work. 23-Guage pin nails, in different lengths, are inexpensive and readily available at Home Depot. This tool made very short work of my baseboard trim installation.
          by
          • Recommended
          This Milwaukee Pin Nailer uses the M12 platform which allows the nailer to be compact and light w...
          This Milwaukee Pin Nailer uses the M12 platform which allows the nailer to be compact and light weight when compared to other battery based nailers. It will be larger than some pneumatic nailers but you are trading the convenience of no air hose and compressor for a larger tool size. This particular kit includes the nailer, one 1.5 Ah battery, a charger for the 12V battery and a soft case. It uses standard 23 gauge pin nails with lengths between 1/2 inch and 1-3/8 inch. While I did not test the battery rundown, Milwaukee indicates the tool can fire 750 pin nails per charge. The tool is comfortable in my hand and I found it very easy to operate. The tip has a protective cover to prevent material marring. A spare protective cover is stored on the tool. The tool also features a belt clip, LED light, hex wrench for jam clearing, battery gauge and a depth adjustment. As with almost all Milwaukee products, no nails are included with the kit. Out of the bag the depth adjustment was set perfectly for the type of wood I was nailing into. Nails set just below the surface. I ran the adjuster to both ends and tested in the same wood and found it sank deeper and the above the surface as expected. Fire rate was not as rapid as a framing nailer but considering this is a battery based product, the firing rate was faster than I expected. The tool, like most in the nailer tool portfolio, has a safety mechanism that must be engaged before a pin nail is fired. In the case of this tool you hold down what Milwaukee calls a lock-off button with your middle finger (it sits just below the trigger) then you can pull the trigger to fire the pin nail. Overall a great product.
          by
          • Recommended
          2 found this review helpful
          Showing 1-10 of 1,359 reviews