M12 12-Volt Lithium-Ion Force Logic Cordless Press Tool Kit (3 Jaws Included) with Two 1.5 Ah Battery and Hard Case

Love it. This saved me a lot of time on my commercial repairs.

Best tool for any pluming. small easy to maneuver...lots of other pro press guns the pin sticks out too far on the opposite side of the locking lever. so for instance if you press 2 90s in line the pin will hit pipe and not let u press...or the body is too big it gets in the way.

This tool is amazing and saves a lot of time by not having to solder. The works looks clean and always seals correctly. You must prep the pipe by reaming and de-burring and it’ll never be a bad seal. Love it. Highly recommend

Just opened this kit (great tool I've used at work). The 3/4 jaw's ID numbers appeared to have been filed off, and looked like it had been used. Other jaws included in picture for comparison.

Amazing tool. Recommend to everyone in the plumbing industry.

Small and powerful ,save u ton of time .Great for hot water coils in Hvac ,boilers ,water heaters .If u do most of the time bigger than 1 inch please consider m-18 .

Excellent press for copper fittings. Easy to use and works very reliably. Press in a fitting in less than 30 seconds with minimal prep work and no flames. I would highly recommend this for any 1/2, 3/4, or 1” copper fittings. They have an 1-1/4” jaw for this as well. Any larger size pipe, you’ll have to look at the m18 press. They also have pex jaws that work for this m12 press. Again- highly recommended- makes work easy and quick.

Get past the initial cost. Because the time that you and you crews will save is far beyond that initial investment and fittings costs. No propane, flux or hot permits means time and money saved. No hot permits saves money and allows your teams to work right along other contractors. Wet line repairs are no problem whatsoever. This tool with these fitting combined allow you to repair lines that are wet. And rest assure these crimps will make you sleep well at night. Now, as far as access…my experience wasn’t an issue. Anywhere I can get my forearm this tool works great. Even for those distant fittings you must reach out for, it performs. Our business seems to revolve primarily around copper. However, more and more of our jobs are moving towards PEX, no surprise there. And that is no problem, Milwaukee offers heads for this Force Logics press tool that will crimp copper PEX rings for PEX applications and heads for iron and stainless. You can purchase the dies individually or in sets. We will be soon investing in die kits for those PEX applications. And finally, ONE-KEY. This tool is equipped with Milwaukee’s ONE-KEY Technology. Simply download the application to your phone or tablet and make sure that your lead-hand does the same. Checkout any of your ONE-KEY tools to your lead hands again, via the application and now you can manage and track your assets from both your job-site or from the office. You can even print the data. Folks this tool is a clear winner for our business. We will add additional press Tools to our other cruise very soon. We will also be investing in the other head kits for the various applications that we serve. Two thumbs up Milwaukee! https://www.homedepot.com/p/Milwaukee-M18-18-Volt-Lithium-Ion-Brushless-Cordless-FORCE-LOGIC-Press-Tool-Kit-with-1-2-in-2-in-Jaws-Kit-6-Jaws-Included-2922-22/313505062 https://www.milwaukeetool.com/Products/Power-Tools/Plumbing-Installation/Expansion-Tools/2922-22

The M18 Force Logic press tool kit is a must-have for plumbers and HVAC service technicians. This tool allows for the joining of copper pipes and fittings without the use of extreme heat to sweat (solder) the joint. This kit comes with jaws for the most common pipe sizes: 1/2", 3/4", 1", 1-1/4", 1-1/12" and 2" jaws plus a standard charger (for M12 and M18 batteries) and 2 X 2 amp hour M18 batteries. The tool itself is a very manageable weight - although not light if working overhead - and the shape of the handle with a finger loop provides a solid grip for working in awkward angles as is frequently the case. The jaws have a relatively low profile that will allow access to tight spaces, but does require some clearance, which prevents this from being used in all situations. The press has plenty of power for even the largest fittings and with the brushless motor, the battery life provides enough run time for most jobs - even with the small 2 amp hour batteries. I discovered that with extreme cold (-10*F) this tool does still operate, though much more slowly than usual. The jaws positively lock into place with an easy to operate retained lock pin that slides through the jaws effortlessly, making for quick press die changes. The jaws smoothly pivot open to accept fittings and the pressing action is quick and indicator lights on the trigger/switch show completed cycles for confirmed presses. Overall a great tool.

This press tool is extremely easy to use! I loved that I was able to work on copper piping without using a hot torch. Had several joints near and around live wiring and receptacles. Even repaired a pipe that was still leaking by. The press tool is light enough to be used one handed. I have done several water line repairs and even a low pressure (150 PSI) air line system in a garage. I used PEX tools and fittings in houses with PEX and copper in houses with copper. Only downfall is that I have to preorder fittings ahead of time because HomeDepot is not currently stocking them in the store but l must admit that they very easily available through the HomeDepot website. I VOTE YES!!!! on this tool and press system. A total time saver. No more need to buy and store brazing flammable gas cylinders.