#1 Home Improvement Retailer

Internet #312596511

Model #2734-21

Store SKU #1005188630

M18 Fuel 18-Volt 10 in. Lithium-Ion Brushless Cordless Dual Bevel Sliding Compound Miter Saw Kit with One 8.0 Ah Battery

  • Delivers up to 400 cuts per charge
  • Dual bevel with 9 detents and easy access bevel lever
  • Fully compatible with the M18 system, featuring over 200+ tools
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

The M18 FUEL 10 in. Dual Bevel Sliding Compound Miter saw was designed to meet the demanding needs of professional carpenters and remodelers. Delivering greater capacity than many corded 10 in. sliding miter saws and the POWERSTATE Brushless motor delivering corded cutting performance. The 2734 provides users a solution to replace their corded miter saws. The M18 REDLITHIUM XC 8.0 Battery battery pack delivers up to 400 cuts per charge making the saw capable of lasting an entire day on site with only 1-pack. Premium features like an adjustable stainless steel detent plate, cam locking miter system, easy access bevel adjustment lever and both a detent override lock and chop lock lever located on the front of the tool. The M18 FUEL miter saw is designed for easy operation and repeatable, accurate cuts.
  • Milwaukee POWERSTATE brushless motor provides more power, more run-time and longer-life
  • REDLINK PLUS electronic intelligence enables advanced communication between your batteries and tools, allowing for unmatch
  • Milwaukee REDLITHIUM battery pack is the most durable pack on the market delivering more run-time, power and longer
  • 2 x 12 horizontal capacity (laying flat at 90°)
  • 2 x 8 horizontal capacity (lying flat at 90°)
  • 5-1/4 in. vertical capacity nested crown
  • 5-3/4 in. vertical capacity (base board against the fence)
  • Cam locking miter detent system
  • Cam locking miter system with adjustable stainless steel miter detent plate and 11 detent locations
  • Detent override for easily setting miter locations outside of detents
  • Dual bevel with 9 detents and easy access bevel lever

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Miter Saws

ExclusiveM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Dual Bevel Sliding Compound Miter Saw with 8.0 Ah Battery
current product
M18 Fuel 18-Volt 10 in. Lithium-Ion Brushless Cordless Dual Bevel Sliding Compound Miter Saw Kit with One 8.0 Ah Battery
M18 FUEL 18-Volt Lithium-Ion Brushless Cordless 12 in. Dual Bevel Sliding Compound Miter Saw Kit with One 12.0Ah BatteryExclusiveM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 12 in. Dual Bevel Sliding Compound Miter Saw Kit with Stand and Battery
BrandMilwaukeeMilwaukeeMilwaukeeMilwaukee
NameM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 7-1/4 in. Dual Bevel Sliding Compound Miter Saw with 8.0 Ah BatteryM18 Fuel 18-Volt 10 in. Lithium-Ion Brushless Cordless Dual Bevel Sliding Compound Miter Saw Kit with One 8.0 Ah BatteryM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 12 in. Dual Bevel Sliding Compound Miter Saw Kit with One 12.0Ah BatteryM18 FUEL 18-Volt Lithium-Ion Brushless Cordless 12 in. Dual Bevel Sliding Compound Miter Saw Kit with Stand and Battery
Price
Ratings
(244)
(124)
(167)
(270)
Miter Saw TypeSliding CompoundSlidingCompoundCompound
Cordless/ CordedCordlessCordlessCordedCorded
Bevel TypeDual BevelDual BevelDual BevelDual Bevel
Power Tool FeaturesElectric Brake,Keyed Blade Change,Positive StopsElectric Brake,Keyed Blade Change,Positive StopsElectric Brake,Keyed Blade Change,Positive StopsElectric Brake,Keyed Blade Change,Positive Stops
Maximum Cutting Thickness (in.)3.56.756.756.75
Blade Diameter (in.)7-1/4101212
Included AccessoriesAllen Key/Wrench,Bag,Blade(s),ClampBag,Blade(s)Charger,ClampBlade Guard System,Charger,Clamp,Tool Only
Cuts ThroughWoodAluminum,Masonary,Plastic,WoodAluminum,PVC,Plastic,WoodAluminum,PVC,Plastic,Wood
Number of Total Batteries Included1111
View ProductView ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
34.5 in
Product Height (in.)
27 in
Product Width (in.)
27.5 in

Details

Arbor Size
1
Batteries Included
Yes
Battery Amp Hours
8 Ah
Battery Power Type
Lithium Ion
Battery Size
18-volt
Battery/Charger
(1) 8 Ah Battery & Charger Included
Battery/Charger
1 Battery & Charger Included
Bevel Type
Dual Bevel
Blade Diameter (in.)
10
Charger Included
Charger Included
Color Family
Red
Condition
New
Construction Material
Aluminum
Cordless Tool Type
Miter Saw
Cordless/ Corded
Cordless
Cuts Through
Aluminum,Masonary,Plastic,Wood
Included
No Additional Items Included
Included Accessories
Bag,Blade(s)
Maximum Amperage (amps)
0
Maximum Cutting Thickness (in.)
6.75
Maximum Degree Miter Cuts - Left
90
Maximum Degree Miter Cuts - Right
90
Miter Saw Type
Sliding
Motor Type
Brushless
Number of Total Batteries Included
1
Power Source
Battery
Power Tool Features
Electric Brake,Keyed Blade Change,Positive Stops
Product Weight (lb.)
45 lb
Returnable
90-Day
Tools Product Type
Power Tool
Voltage (volts)
18

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
5 year tool 3 year warranty

Questions & Answers

13Questions11Answers

Can someone tell me the difference between this model and the 2734-20 model?

Asked by Carpenter808 May 26, 2021
1
Answer

Hello Carpenter808! Our Milwaukee M18 Fuel 18-Volt 10 in. Lithium-Ion Brushless Cordless Dual Bevel Sliding Compound Miter Saw Kit with One 8.0 Ah Battery (2734-21) will come as a kit whereas our M18 FUEL™ 10" Dual Bevel Sliding Compound Miter Saw (2734-20) will come tool only.

Why isn't this listed as a buy more save more saw...

Asked by Chuck April 22, 2021
0
Answers

Does anyone have any idea how tall this saw is from bottom of base to top of saw (minus battery) ...

Asked by Justasking March 31, 2021
0
Answers

How do you get crown stops cat no 43-98-0295?

Asked by Stella March 11, 2021
0
Answers

Can i use 4.0 ah for this miter saw?

Asked by Kiliti February 26, 2021
1
Answer

Hi there! You can use any M18 battery with any M18 product. However, we'd suggest a larger amp hour battery for a longer run time.

how come this is not included with the Buy More Get More Promo?

Asked by MrGee February 9, 2021
0
Answers

What is the full depth of this saw when extended out?

Asked by Mikey January 15, 2021
3
Answers

5.75 inches no matter where the slide is as the slide runs parallel to the base.

What are the most compact storage dimensions? I have a very small work space and must store this...

Asked by EWC July 1, 2020
1
Answer

28in×16in×30in without the sawdust collector on the back, add 7in if stored with

How many inches of clearance are required between the back of the Milwaukee 2734-20 18V M18 FUEL ...

Asked by Gwenies April 15, 2020
3
Answers

From the fence to the dust bag you need about 24”

What is the maximum cut length on a 45 degree angle on a 2 inch board? 2x? Asked a different way:...

Asked by WhyIsntThisInTheSpecs June 29, 2019
2
Answers

2x10

M18 Fuel 18-Volt 10 in. Lithium-Ion Brushless Cordless Dual Bevel Sliding Compound Miter Saw Kit with One 8.0 Ah Battery - page 2

Customer Reviews

  • 4.5
    out of 124 reviews
  • 69% recommend this product
Filter by:
Showing 1-10 of 124 reviews
Great saw for the price - Combo
i have had this saw for a few months now and no complaints except one. my neighbor and i were truing the blade and the fence to blade alignment was fine. The blade to table alignment however, was a little more complicated. in the owners manual on page 11, "Squaring the blade to the table" step 6, says to use a T25 wrench to adjust the bevel setting. This is inaccurate as this is adjusted with an Allen wrench, not a T-25. naturally, the adjustment screw stripped out and i had to call SAWDUST. they kindly sent me a replacement and when it arrived it was part # 44-60-0026 shown on the bag as well as in the Service Parts List. So they sent me out a replacement part, assuring it would be the correct one after describing it. Sure enough, the same part was sent a second time. Again, i contacted support and spoke with someone who took the time to actually look into the problem, understand how the part worked, and made sure i would receive the right part this time. the next day i get a call from the same person. the part listed in the Parts Service List is part # 45-04-0026. close enough to make a mistake. (I even sent her pictures of the part i got from them, and the part i needed replaced - Included in post) so now i am waiting for the actual Detent Mount Adjustment Screw replacement. Additionally if you purchase this saw, make sure you DO NOT use a T25 wrench to adjust the blade to table bevel. Double check the screw itself to make sure it is an Allen screw. i was told that this specific part is 45-04-0025 listed in the Milwaukee Tool parts price list as "SCREW ADJUSTMENT" whereas 45-04-0026, shown in the Parts List is listed as "DETENT MOUNT ADJUSTMENT SCREW"(These are not the same parts) Part 44-60-0026 (the one i received twice is listed as "CHOP STOP PIVOT PIN" Neither of these are detailed in the owners manual and you have to pull the Service Parts List PDF from Milwaukee's website because home depot has the wrong item listed as the owners manual on their site. In case anyone runs across this same problem when making a blade adjustment, i thought i would post this up here. otherwise it a great saw with great cutting finishes, the battery outlasts the jobs i use it for, cleanup and storage is a breeze with my new French Cleat system i used it on. i can actually hang it up by the Kickstand, or the black loop hook in the back and it wont fall off the wall. ***NOTE FOR MILWAUKEE: 1. You need to update your Operators manual to indicate the correct type and size wrench for this adjustment screw. (Page 11, bullet point 6.) 2. Service Parts List PDF to show the correct part number listed for this item (45-04-0025) 3. Either include with the saw or make available for purchase, Part #61-10-0415 and 61-10-0410 so that the tool can be properly calibrated and adjusted per your instructions in the Operators Manual.
by MattA
3 people found this helpful
No for finished carpenters
Bought this saw for my lighter finished carpentry work. After a few days of use, while making a compound cut (beveled and uncommon degree miter) the saw slid a few degrees over. Hoping it was just an adjustment issue, I tightened the miter locking mechanism to where it required significant force to lock in a miter but that didn’t help. I was only cuting 3/4 material and was taking it slow. I’m a dewalt guy but was really giving this saw a chance and trying to justify the purchase already having purchased a spare battery for it. Unfortunately this saw just wasn’t worth it for me as a professional finished carpenter so I returned it. Also the sliding mechanism sounds and feels very cheap and flimsy on this saw. But if all you need is to make straight 90 or 45 degree cuts and don’t mind the feel of the sliding mechanism, go for it. If you’re open to other brands, there are plenty better options out there in my opinion. I always took Milwaukee for a good quality manufacturer but they need to step there game up with this one.
by Vitaliy
Response from Milwaukee ToolSep 9, 2020
Hello, this is Elise with Milwaukee Tool. Vitaliy, thank you for your review. We would like the opportunity to investigate your feedback further on your saw. We value hearing your input on why this product didn’t meet your expectations and how we can improve in the future. Please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
2 people found this helpful
I can't believe this!
I absolutely love Milwaukee ! Everyone calls me red man. But I have to say I'm embarrassed to own this. All my cuts in my 4in base are off. I used it at first for framing which its fine for but for finish carpentry it is not. Now I'm past return window . Cable system for bevel is horrible.
by Odatscoo716
Response from Milwaukee ToolAug 31, 2020
Hello, this is Elise with Milwaukee Tool. Odatscoo716, thank you for your review. We would like the opportunity to investigate your feedback further on your saw. We value hearing your input on why this product didn’t meet your expectations and how we can improve in the future. Please feel free to contact us directly at socialmedia@milwaukeetool.com so we can get this matter resolved as soon as possible for you. Thank You
5 people found this helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
The saw Performs just like it should and it needed no tweaking out of the box it was perfectly sq...
The saw Performs just like it should and it needed no tweaking out of the box it was perfectly square set up just right. The line that identifies the cut line Stands out the Most of the features and was dead on I’ve had the saw about 45 days and it meets my expectations thanks for a great product for me a experienced woodworker. Steve
by Steve
1 person found this helpful
Portable Powerhouse
Used mine for 2 days of deck building so far on the initial charge. I've ripped several 2x10's, 2x8's and smaller mitres and I finally burned 1 bar (of 4) of power. Totally impressed to say the least. 2 others helping me took turns and felt comfortable with their cuts and the ease of use. What I wanted and achieved was a saw I could stash in my basement tucked away, did dual mitres and could go the distance... I have more.
by RockinRog
Love the size and capabilities. Wish they'd make a corded...
Love the size and capabilities. Wish they'd make a corded 10" saw; battery power has been inadequate for some larger cuts.
by HomeDepotCustomer
I will never trade this bad boy!!! Best tool I...
I will never trade this bad boy!!! Best tool I own!
by HomeDepotCustomer
by DiamondRodentProofing
This is the best sliding compound miter saw I own....
This is the best sliding compound miter saw I own. I have worn out three corded name brand saws which I like but the CORDLESS is a game changer. It’s got some pretty cool features but one thing I really appreciate is the location of the handles. It makes it real easy to move and set up. Another thing I like is the dust collection bag actually works. I usually hook up a vacuum but for quick cuts I just leave the bag on and it does a pretty good job.
by RBS
Showing 1-10 of 124 reviews