#1 Home Improvement Retailer

Internet #302029682

Model #5317-DE

SDS Max Dust Extraction Attachment

  • OSHA Table 1 Compliance with 8 Gallon Dust Extractor (8960-20)
  • Removable brush rings for up to 2-3/4" drilling and coring
  • Quick Easy Attachment to Milwaukee Hose Clip Adaptor (49-90-1959)
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Attachment with an OSHA compliant design


OSHA Compliant Design

When used with the intended tool, this attachment is fully OSHA compliant for use on the job site.

Fits the Milwaukee 8960-20 8 Gal. Dust Extractor


Threaded for Easy Attachment

This tool is threaded for easy attachment to your Milwaukee 8960-20 8 Gal. Dust Extractor.

Dust Extraction attachment with a rubber seal


Rubber Seal for Dust Containment

This dust extractor attachment is outfitted with a rubber seal that makes it easy to contain dust for cleaner results.

The Milwaukee 5317-DE SDS Max Dust Extraction Attachment provides users with a solution for the regulation on respirable crystalline silica dust (29 CFR 1926.1153). The 5317-DE SDS Max Dust Extraction Attachment is optimized for all drilling depths and any hole ranging from and 2-3/4 in. D. Its removable brush rings allows for increased tool life when performing larger dry coring applications. Attach to the Milwaukee 8960-20 8 Gal. Dust Extractor for a complete OSHA Table 1 compliant solution.
  • OSHA compliance when used with Milwaukee 8 Gal. dust extractor (8960-20)
  • Removable brush rings for up to 2-3/4 in. drilling and coring applications
  • Quick and easy attachment to Milwaukee hose clip adaptor (49-90-1959)
  • Vacuum assisted suction adheres to even and uneven surfaces
  • 5-year warranty
  • Rubber seal ensures dust containment
  • Includes: (1) SDS max dust extraction attachment (5317-DE) and (1) hose clip adaptor (49-90-1959)
  • Shop All Milwaukee Tools

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Interior Hose Diameter (In.)
1 in
Product Depth (in.)
8.75 in
Product Height (in.)
2 in
Product Width (in.)
4.6 in

Details

Bag Capacity/Dry Volume (cu. ft.)
29 cu ft
Color Family
Red
Decibel (Sound) Rating
01-Not Measured
Dust Collection Product Type
Dust Collector
Dust Collector Type
Single Stage
Horsepower (HP)
0 hp
Maximum Air Flow Capacity (CFM)
0 CFM
Power Tool Features
No Additional Features
Product Weight (lb.)
.57 lb
Returnable
90-Day
Tools Product Type
Power Tool

Warranty / Certifications

Manufacturer Warranty
5 Year Warranty

Questions & Answers

4Questions6Answers

Does this work with the m18 backpack vacuum?

Asked by Tim April 3, 2021
1
Answer

Yes, it should work with any vacuum as long as it has sufficient suction power, and the right size nozzle.

Is there any reason why I can't use this Milwaukee SDS Max Dust Extraction Attachment with SDS Pl...

Asked by CuriousMD September 14, 2020
1
Answer

Hi there! Our SDS Max Dust Extraction Attachment (5317-DE) is optimized for all drilling depths and any hole ranging from ¼” and 2-3/4” in diameter. Attaching the hammer drill dust collector to our MILWAUKEE® 8 Gallon Dust Extractor (8960-20) provides you with a complete OSHA Table 1 compliant solution.

Does this fit or adapt to standard 1 7/8" hose?

Asked by Fred November 19, 2018
1
Answer

No. It will fit a hose with the following dimensions. Vacuum Port Outer Diameter ......................1-7/16" Vacuum Port Inner Diameter .........................1-1/4" Adaptor Outer Diameter ................................1-3/4" Adaptor Inner Diameter.................................1-1/2"

Can I use this attachment with the Milwaukee Cordless Wet/Dry Vacuum?

Asked by Han October 21, 2017
3
Answers

You must use a Vac with a HEPA filter with capability to remove 99% of particles to be OSHA compliant.

Customer Reviews

  • 4.4
    out of 20 reviews
  • 100% recommend this product
Filter by:
Showing 1-10 of 20 reviews
Getting ready for the new OSHA standard, I decided to go ahead and use what I know best, Milwauke...
Getting ready for the new OSHA standard, I decided to go ahead and use what I know best, Milwaukee has been good so far with no problems so I'm going to try this out. It seems like a pretty simple attachment, easy to use, I haven't been able to use it on the job site yet but I uploaded a couple of pictures to give a better point of view than the ones on the page. Hope this helps and it is less expensive than the others I've seen. stay safe and current with OSHA standards guys.
by Eli
1 person found this helpful
Much smaller than you would think. I had to buy...
Much smaller than you would think. I had to buy the Bosch one to put on my Milwaukee vac so I could actually do work. Only good if you drill small holes.
by RYAN
Response from Milwaukee ToolNov 13, 2020
Hello, this is Elise with Milwaukee Tool. RYAN, thank you for your review. We value hearing your input on why this product didn’t meet your expectations and how we can improve in the future. Please feel free to contact us directly at socialmedia@milwaukeetool.com. Thank You
The attachment would not fit on my Milwaukee portable vacuum...
The attachment would not fit on my Milwaukee portable vacuum so I had to use duct tape to make the connection which is ridiculous in my opinion if you buy a Milwaukee vacuum and a Milwaukee dust collector attachment they should fit together seamlessly
by DANIEL
2 people found this helpful
we use this when drilling new light pole anchor bolts. It prevents dust from flying and debris fr...
we use this when drilling new light pole anchor bolts. It prevents dust from flying and debris from piling up around the hole.
by Kurtis
Works great in regards to the Silica standard
Works great in regards to the Silica standard
by SafetyLady
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
5 Star Review
Rating provided by a verified purchaser
by HomeDepotCustomer
5 Star Review
Rating provided by a verified purchaser
by Junior
worked as advertised
worked as advertised
by warren
It seemed to work okay on the hole that I tried so far in drywall. I got it for drilling in bloc...
It seemed to work okay on the hole that I tried so far in drywall. I got it for drilling in block & plaster walls. I don't know how will it will hold on the rougher wall surface. I have a job coming in the spring that I will be doing those type holes and we will see. Electrical contractor.
by RT
Showing 1-10 of 20 reviews