#1 Home Improvement Retailer

Internet # 316105161

Model # 48-32-4024-49-66-7024

Store SKU # 1009480525

SHOCKWAVE 3/8 in. SAE Deep Impact Rated Socket Set and Shockwave Impact Duty Driver Steel Bit Set (58-Piece)

$59.97
$80.94
Save $20.97 (26%)
Apply Now
Pay $34.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • WEAR GUARD TIP™ improves wear resistance & protects bit life
  • Optimized SHOCK ZONE™ absorbs peak torque & prevents breaking
  • Ink-filled size markings to select the right socket every time
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The MILWAUKEE SHOCKWAVE Impact Duty 50PC Drill & Drive Set is engineered to be the Most Durable, Best Fitting driver bits on the market. The WEAR GUARD TIP delivers increased wear resistance which protects the impact bit's fit over the life of the bit. The SHOCK ZONE is optimized for each tip type and length of driver bit in the set to absorb peak torque and prevent breaking. The driver bits are made from CUSTOM ALLOY76 steel and a proprietary heat treatment process to extend bit life, providing up to 50X life versus other impact driver bits on the market. The set is organized in a customizable accessory case designed for use in PACKOUT. The MILWAUKEE SHOCKWAVE Impact Duty 3/8" Drive 6 Point Socket Sets feature the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables you to select the right socket every time throughout the life of the socket. These sockets are engineered with high-strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding, and a dual-hole design and ring groove allow easy socket attachment and removal. The customizable Socket Rail has removable end caps to add or take off socket clips for optimal storage. All MILWAUKEE SHOCKWAVE Impact Duty Sockets are backed by a Lifetime Guarantee and meet ASME industry standards.

Highlights

  • Optimized for use with 1/2 in. drive impact wrenches, drivers, ratchets, and adapters
  • Stamped and ink filled diameter markings for wear resistance
  • 6-point design made with forged impact steel for durability in high torque applications backed by our lifetime guarantee
  • Kit includes 7 deep SAE sockets and 1 socket adapter, the following sizes are included: 5/16 in., 3/8 in., 7/16 in., 1/2 in., 9/16 in., 5/8 in., 3/4 in., 3/8 in. socket adapter and Shockwave 50-piece impact driver bit set
  • Interchangeable clips for rail customization
  • Dual hole design and groove for easier attachment
  • Non-slip hex geometry to prevent socket and fastener rounding
  • Lifetime guarantee covers impact sockets and extensions only
  • Laser etched part number
  • Meets ASME industry standards
  • Shop All Milwaukee Products
  • Return Policy

Product Information

Internet # 316105161

Model # 48-32-4024-49-66-7024

Store SKU # 1009480525

Additional Resources

Shop All Milwaukee

Specifications

Drive Size: 1/2 in

Dimensions

Drive Size1/2 in

Details

Carrier TypeNo Carrier IncludedHand Tool TypeImpact Socket
Individual/SetSetMeasurement StandardSAE
Number of Pieces58Returnable90-Day
Socket DepthDeepSocket TypeImpact Socket
Tools IncludedSocketsTools Product TypeHand Tool
UniversalUniversal

Warranty / Certifications

Manufacturer WarrantyLifetime Guarantee

Questions & Answers

23Questions
caret
Q:Where are these bits manufactured?
by|Jan 31, 2024
1 Answer
Answer This Question

A:  Bit holders and nutdrivers made in Taiwan Driver bits made in China and Vietnam

by|Feb 3, 2024
    caret
    Q:Will these work with a Ryobi 3/8in. Impact Wrench?
    by|Jan 4, 2024
    1 Answer
    Answer This Question

    A:  They are compatible with a 3/8 in impact wrench. - Milwaukee Tool, Social Team

    by|Jan 4, 2024
      caret
      Q:Is this product : impact drill and drive set : 48-32-4024 compatible with the Milwaukee M 18 Compact 2 tool combo cordless drill ?
      by|Dec 29, 2023
      1 Answer
      Answer This Question

      A:  I would say it is. Some of the Milwaukee bit sets labeled as "impact" quality are just marketing and sales gimmicks. I'm an old commercial carpenter & millwright. Only Makita bit sets hold up well to repeated impact driver use.

      by|Feb 11, 2024
        1 found this answer helpful
        caret
        Q:Milwaukee SHOCKWAVE Impact Duty Alloy Steel Screw Driver Drill Bit Set (50-Piece). Can this kit be used with the cordless 1/4” hex screwdriver tool
        by|Nov 26, 2023
        1 Answer
        Answer This Question

        A:  Yes, they can. Most of the so called Impact Duty bit sets are no more than Alloy steel. I only use drills with chucks to run screws into wood, not impacts. Drills give much more torque control

        by|Feb 11, 2024
          1 found this answer helpful
          Showing 1-4 of 23

          Customer Reviews

          4.7 out of 5
          • 4.7 out of 1,802 reviews
          • 93% recommend this product
          Filter by:
          Showing 1-10 of 1,802 reviews
          Poor quality
          T-25 bit mangled with the pressure of a wall stud. Very disappointed in the quality. Would not recommend when the cheaper options would provide the same result. Light home use*
          by
          Response from Milwaukee ToolDec 6, 2023
          Thank you for your insight! We will make sure to pass it along! - Milwaukee Tool, Social Team
            Great kit
            Great all in one kit
            by
            • Verified Purchase
            Tougher Than The Rock
            The bits are a real variety with the assortment you get. The adapter is magnetic so you don’t lose bits and is easily changeable. The case is awesome that I can store other bits inside.
            by
              • Recommended
              2 found this review helpful
              SUMMARY: A WELCOME ADDITION TO MY 3/8 IN. DEEP SOCKET SET. BACKGROUND: I didn’t have a good 3/8” ...
              SUMMARY: A WELCOME ADDITION TO MY 3/8 IN. DEEP SOCKET SET. BACKGROUND: I didn’t have a good 3/8” deep socket set. The 49-66-7024 set looked like a good general-purpose set. FIT AND FINISH: The same durable, easy to read markings as my other Milwaukee sets. FEATURES: From the Home Depot page, with my comments as appropriate. • Boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables users to select the right socket every time throughout the life of the socket. o The markings are easy to see when new. Time will tell if dirt and grease makes it difficult. Size is only marked on one side. It would be nice if the size were marked around each socket. • Laser etched part number. o Handy if I ever need to replace one. • Engineered with high strength forged steel for optimized performance in heavy-duty applications. o I contacted Milwaukee technical support and asked : “What alloy is used for your impact rated sockets?” They replied: “this would be considered proprietary information, so not appropriate to share.” I find that a disappointing answer as I have been able to get alloy composition from other manufacturers in the past. • Dual-hole design and ring groove allow for easy socket attachment and removal. o The dual-hole design is slightly harder to remove than the internal recesses in some of my other sockets. But I’d rather have them a little harder to remove than too easy. • Customizable Socket Rail comes with removeable end caps to add or take off socket clips for optimal storage. o You can do it, but there isn’t room to add any sockets to the rail. • Meets ASME industry standards. o There are tons of standards, but Milwaukee doesn’t say which ones on the package or the product information page. • Kit includes 7 Deep SAE Sockets and 1 Socket Adapter. The following sizes are included: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, ¾ sockets and a ¼ hex to 3/8 square drive Socket Adapter. o This fits most of my SAE needs. • Non-slip hex geometry to prevents socket and fastener rounding. o The radius relieved corners seem to be a common construction configuration now. o I did an test of the non-slip feature (see photos) and found that the socket will deform (crease) a grade 5 nut to such an extent that a standard socket will be slightly difficult to use. But it didn’t round it over. I believe this is because the radius relieved corners appear to be simple circular sections, leaving an edge between the flats and the reliefs. I seem to recall in years past that at least on other manufacturer had a slight blending between the two surfaces to avoid concentrating the force along an edge. The socket did not appear to suffer any damage. • Lifetime Guarantee covers impact sockets and extensions only. • Optimized for use with 3/8" drive impact wrenches, drivers, ratchets, and adapters. SUMMARY: A nice addition to my tool collection. PROS: Sturdy, durable CONS: Non-slip feature may deform softer nuts and bolts.
              by
              • Recommended
              5 found this review helpful
              I was having trouble fixing my bike one day and I asked my father what the socket was called that was the exact same shape as the nut. "Six-point socket", he told me. "That's what I need", I said. So whenever I see a 6-point socket like these I think of him. This set has the most used sizes from 5/16" to 3/4". It comes in a tightly sealed blister-card you'll need a good sharp blade to open. I made a few strategic cuts so I can use it as a storage case because I obsess over tools being in a case of their own.I can't imagine where you'd want to nail home a 5/16" with an impact wrench, but there's one here. These are deep-well sockets providing reach and versatility. The sizes are marked in easily seen white ink. Included is an adapter for 1/4" hex to 3/8" square drive for using with the corresponding impact driver. The star of this show is the organizer the sockets are attached to. Far superior to other socket organizers I have seen. I searched to see if Milwaukee markets these socket organizers separately but currently didn't see any available. This would make a great gift for any DIYer.
              by
              • Recommended
              3 found this review helpful
              The inclusion of the socket adapter means I can use these sockets with the powerful M12 Fuel Surg...
              The inclusion of the socket adapter means I can use these sockets with the powerful M12 Fuel Surge 1/4 inch impact driver - see video. The M12 ratchet and M18 1/2 inch impact gun got to have a go too. The excellent non-slip hex geometry means the sockets can still drive bolts with worn and damaged corners. The most obvious feature of these sockets is the large, clear etched and inked size markings. A great advantage to users in many circumstances. The rail is good quality and helps to ensure inventory control as it is so obvious when a socket is not on the rail.
              by
              • Recommended
              3 found this review helpful
              If there’s anything a serious DIY needs around the garage and work shop, it’s a heavy duty, depen...
              If there’s anything a serious DIY needs around the garage and work shop, it’s a heavy duty, dependable set of sockets to fit the standard ⅜” drive tools. Therefore, I picked up a set of the Milwaukee 6-point SHOCKWAVE deep sockets to get my work done, when the standard SAE application is required. Whether working on my lawn mower, appliances, or my pickup truck, the 8-piece set is the way to go. With the 6-point impact sockets, there is no chance of slipping or stripping out a nut that is difficult to grab. The 6-point holds securely, every time. My two favorite tools when using this set are the Milwaukee M-18 impact wrench and the M-12 ratchet. And all the sockets have excellent size marking, clearly visible in low light, when needing to change sizes. The impact wrench is great for general work, and the impact ratchet can get into tighter places. And the most common metric sizes, from 5/16” to ¾", with the ⅜” driver attachment, if necessary. And the best part? Each set comes with its own ‘strip’ to keep them attached and together, so nothing gets lost! This set will tackle pretty much everything around my shop, and should last me a lifetime.
              by
              • Recommended
              Well Milwaukee doesn’t it again, theses Milwaukee Shockwave 3/8 in are awesome. They are made sol...
              Well Milwaukee doesn’t it again, theses Milwaukee Shockwave 3/8 in are awesome. They are made solid and love the stamped and and ink filled sizes, no more stoping and looking for a certain size they stand out great. Really like the 6 point hex opening so will dramatically reduce rounding of nuts or fasteners, they came with a hand tray and clips for easy storage and with the holes on each end to mount to and work stations. Like the extra impact sockets adapter so if I want or need to use my impact driver I can just connect and use these sockets, and can also use with a ratchet driver also. These Milwaukee shockwave impact duty 3/8 SAE deep impact rated sockets are just a beast, they come in a set of 8 which includes the impact sockets adapter, wouldn’t expect anything less from Milwaukee.
              by
              • Recommended
              I love the Milwaukee shockwave impact sockets they are very durable. The one thing that caught my...
              I love the Milwaukee shockwave impact sockets they are very durable. The one thing that caught my eye right off the bat whn I got the socket set is the size markings I can see these markings with no trouble even in dim light. The markings are stamp and painted on. The set comes on a customizable rail where each piece is removable. This is a great set for anyone who has a impact tool and it even comes with a 1/4 inch adapter which is very good for the people who has the 1/4 impact tool. You just can not beat the quality of these Milwaukee tools.
              by
              • Recommended
              2 found this review helpful
              I ordered three of these socket sets because since I have other Milwaukee products and have alway...
              I ordered three of these socket sets because since I have other Milwaukee products and have always been very satisfied with the quality I knew I would like these. They are very well made and sturdy. Also the sizes are clearly marked and easy to read. They are meant to be used with impact guns and drivers.. A tray is provided to store them in. I am using them on my farm machinery at present. They have a lifetime warranty.
              by
              • Recommended
              Showing 1-10 of 1,802 reviews