Internet #205466561

Model #34110

4 in. Wheel Kit for up to 1200 lbs. Capacity Boat Ramp

  • Triangular HDG support plates provide additional stability
  • Equipped with necessary steel hardware to aid installation
  • Designed to help you roll your boat up to the shore with ease
  • See More Details

Frequently Bought Together


Product Overview

Simply the most secure and cost-efficient way to beach your PWC or Small Craft. Put your fishing boat on a ramp made with these wheels and remove the drain plug to prevent water accumulation between utilisations. A very smart way to help you refuel your PWC without spillage and protect your turbine and hull against sand abrasion. Servicing and dry-docking a boat is made easier on a boat ramp. Wheels on the ramp allows the boat to be rolled up onto shore, either to be serviced or dry-docked. The box contains 8 wheels and all necessary hardware to install on a 2 in. x 8 in. lumber ramp.
  • 4 in. Dia x 1,43 in. W wheels with triangular HDG support plates
  • The box contains 8 wheels and all necessary steel hardware to install the wheels on a 2 in. x 8 in. lumber ramp that will handle up to 1200 lbs boat or PWC.
  • Includes an assembly guide with listings of required lumber and other suggested parts needed to build a wood ramp for small boat or PWC. This guide can be downloaded from this webpage
  • Get more than 1 box and let your imagination and skills build kayak launcher, pontoon ramp and more

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.



Product Depth (in.)
5.25 in
Product Height (in.)
5.25 in
Product Length (in.)
5 in
Product Width (in.)
4.25 in


Dock Hardware Type
Duty Rating
Marine Supplies Product Type
Other Marine Hardware
Galvanized Steel
Product Weight (lb.)
2.2 lb

Warranty / Certifications

Manufacturer Warranty
Limited Warranty. For more information please see our web site

Questions & Answers


I need rollers for the end of a floating dock ramp. It is made of (3) 2x12's and then covered w...

Asked by Doug June 6, 2020

Hello Doug, These wheels are only sold 8/pack. To do the installation that you have in mind, wheels with bearing systems are recommended. If you proceed with this installation, it's really important to install guiding rails for the wheels on the floating dock section. Good luck with your project!

Our Zodiac has a white fiberglass hull, will the wheels leave any scuff marks? Thanks

Asked by shaggy April 14, 2020

I would say no...I have an 12 foot aluminum boat which is very light in weight. The wheels are of a plastic material or resin and roll very easily. In my opinion they will work for you.

How many per box? Thanks

Asked by Glenn June 11, 2019

the set i got had 8 wheel kits , each set had 1 wheel, 2 brackets, 1 center bolt nut and sleeve and 2 attachment bolts and nuts

Could the ramp be made of aluminum rather than wood?

Asked by Eugenie May 27, 2019

Hi Eugenie, on the webpage there is the assembly guide with all the suggested lumber lenght and all the requested components. We love it when our customer community try and share new ways of assembling our products to fit their needs but there is too many specifications to consider in switching from wood to aluminum ( strength of your aluminum extrusion, mixed of galvanised bolts with aluminum...) that it would be impossible for us to tell you a final yes or no. Nevertheless, we've created some kayak and pontoon aluminum ramp kits so the possibilities are endless I guess...

what is weight cap of each wheel

Asked by etheredge June 24, 2018

Hello, I don't have the exact capacity per wheel so I don't want to give you wrong information. But using this kit of 8 wheels, you will be able to winch up your PWC up to 1200 lbs.

Customer Reviews

  • 6 Customer Reviews
  • 3.7 out of 5 stars overall
67% of customers recommended.
Overall Ratings
Sort By:
Great product. Bought it this summer and built the ramp with the included plans. So much easier t...
Great product. Bought it this summer and built the ramp with the included plans. So much easier to pull the boat onto shore now. Highly recommended.
Was this helpful?
Response from Your Multinautic ExpertSeptember 25, 2018
Thanks you Boomer for this nice comment! Also sharing a picture of your finished ramp is really appreciated and helps other customers to see final product in real life! Thanks for taking the time of doing it. jstevers
great product, great delivery, good price for four sets of...
great product, great delivery, good price for four sets of boat ramp casters
Was this helpful?
Just what was expected...
Just what was expected
Was this helpful?
Response from Your Multinautic ExpertOctober 19, 2017
Hello David,
Thank you for choosing Multinautic and thank you for the review! jstevers
Seem to be working very wwell for an onshore ramp...
Seem to be working very wwell for an onshore ramp for a 14' aluminumV-Hull fishing boat.
Was this helpful?
The frames are galvanized steel not aluminum as advertized. I am returning the order, and request...
The frames are galvanized steel not aluminum as advertized. I am returning the order, and requesting the correction per add.
Was this helpful?
Response from Multinautic TeamMay 11, 2017
Hi Moco, You are correct and it's our mistake, originally we did have Aluminum but then decided to go with Galvanized Steel which is so much more strong than Aluminum can be. We'll make the corrections ASAP and apologize for the inconvenience!
The Multinautic Team! Johanne
Think twice about ordering, this is not Amazon you are dealing with...Especially if your project is time sensitive
Quality :
Value :
The product worked as I expected however Home Depot's choice of a supplier is at best questionable. The product was direct-shipped from the supplier to my home via UPS. Obviously this supplier did not take into consideration that durability of packaging is important (ISTA has excellent protocols to validate shipping). The Shipping box was crushed, the zip-lock bag containing the hardware was in was torn and it appeared to be recycled. The quality of the bag would be minimally appropriate for a sandwich but not 10 lbs of galvanized and stainless steel hardware. To top off this experience, the supplier neglected to add the wheel bushings which rendered the product unusable and it had to be returned to the local home depot. Prior to returning the product, I contacted the Home depot help desk to see if they could resolve this issue. They could not or would not send replacement bushings and directed that the product be returned to the local Home Depot. When I ordered the replacement product, Home depot had the Gall to tell me the price increased by $10. When I challenged them, they relented and conceded the price increase. When the replacement order arrived, the packaging was in worse condition, but the bushing were included. Home depot needs to be more selective of their suppliers and audit their performance if they want to continue playing in Amazon's direct fulfillment space
Was this helpful?
Review this Product
Share your thoughts with other customers