Less than a 100sqft, about 14 boards will cover 100 sqft.
No, sold separately.
Roughly 3 packs depending on your design.
The 8 foot boards come in individual pieces or you can go to your local prodesk and ask to order individual.
Hello Gene. For a 21 x 6 install you would need roughly 18 boards, or two of our 10 - packs. You may use the extra boards to fill in any gaps. If you have any further questions please email us at email@example.com.
We are in process of switching to new screws, which are not yet available through Home Depot. Please reach out to firstname.lastname@example.org for more information.
Hello Jeanne. We are in the process of listing them on Home Depot but they can reach out to us directly to purchase. We recommend using 2 screws, one on each side, every 16 inches, so for 16 foot board, it would be 13x2 or 26 screws per board. At 60 boards, that's 26x60 or 1560 screws. They're sold in packs of 100 so they will need 16 boxes. More information about these screws are available on our vendor's site: http://www.starbornindustries.com/cap-tor-xd-product.
A 10 x 16 deck is 160 square feet and each box of 10 deck tiles is 10 square feet so you would need 16 10-packs of deck tiles.
Hi, Ron. The exact dimensions of this board are 5.5 x 0.9 in (138 x 22.5 mm). They are sold in 16 feet lengths, but can be cut. Please let me know if this answers your question. If not, please reply here or reach out via the customer inquiry form on our website at http://www.newtechwood.com/us/contact.html.