After 90 degrees it's going to be too hot to step on barefoot.
1 should be enough
You can go to the pro desk to buy a specific number instead of a pack.
I used both the hollow core and solid types on my deck. The decking pattern I designed had a double row picture frame border around the edge and I used the solid core for that so that I could screw them directly to the joists. I used the T-clips for the hollow core but I had to cut one side off in places where I put a clip between a hollow and a solid board. Boards have held up well, just need to make a few gap adjustments but easy to loosen the screws or replace them as needed. Still very satisfied with the choice of these boards.
Go to our website and request a sample at the contact us page.
2.3 packs. We also sell 10 packs as well. You need a total of 113 boards, but you should always order some extra.
We recommend keeping the board out for 24 hours in exactly the area where you will screw it down before installing it.
The 49-pack covers 784 linear feet.
Would you use this to cover a deck with a swimming pool? Is it slippery when wet as some of the other composites are or does it have enough texture not to be?
Unfortunatley our company only manufactures 8ft and 16ft boards. If you would like to make a custom order, the project must meet two minimums: 1. 2400 total linear feet (roughly 1000 square feet) of material . 2. 16 week lead time .