$5.04
- Rings can be stacked on closet flange to achieve desired height
- Robust 1/4 in. thick PVC construction
- Toilet flange spacer comes with 6 holes for secure attachment
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Testable Closet Flanges
Made with a test cap that easily and cleanly breaks out, eliminating the possibility of falling down the DWV line.
Open Closet Flanges
Ring provides a crack-resistant connection between the water closet outlet and plumbing system that is flush with the floor.
Spigot Fit Closet Flanges
Spigot fit sits flush with the floor and allows for a quick and easy connection to the piping system.
Open
The open toilet flange requires a test plug or cap for pressure testing and is primarily used in repair work.
Closed
The closed toilet flange with pre-installed ability for pressure testing is primarily used in new construction.
Specialty
The 45-degree and offset specialty toilet flanges allow for margin of error in drain/pipe alignment.
Repair
The repair toilet flange replaces broken cast iron flanges.
Repair/Remodel Connection
Inside fit. Not code approved.
Inside/Outside Connection
Inside/ouside fit.
Hub Connection
Outside fit.
Spigot Connection
Same size as pipe. Requires fitting.
Offset Connection
Inside/outside fit.
Twist-N-Set Connection
Inside fit. Not code approved.
Oatey Closet Flange Spacer builds up existing closet flanges when installing new flooring and renders finished floor height below grade. The stackable feature accommodates a wide range of height adjustments. Oatey products have earned the trust of plumbing professionals for over 100 years.
- Spacer builds up existing toilet flange on below-grade flooring
- 1/4 in. thick
- Up to 3 can be stacked together
- Builds up existing toilet flange when new flooring is installed
- For use when overlaying, replacing or tiling bathroom floors
- Can be solvent welded on its horizontal surface using PVC solvent cement or secured using mechanical means
- Can be stacked to desired height, up to a maximum of 3 rings
- 1-pack
- Return Policy
Specifications
Dimensions: H .25 in, W 7 in, D 7 in
Questions & Answers
24Questions
Q:My flat white flange doesn't go in my septic pipe doesn't go around my septic pipe it is the exact same size of my septic pipe is it suppose to be that way PVC flange?
by|Sep 30, 2023
1 Answer
Q:About how much above the surrounding floor should the top of the flange be?
by|Sep 1, 2023
1 Answer
Q:How do I screw these into the subfloor over an existing metal flange if the holes do not line up? Thanks!
by|Jul 17, 2023
1 Answer
Q:Can this be used on top of an abs toilet flange?
by|May 5, 2023
1 Answer
Showing 1-4 of 24
5
99
4
20
3
7
2
3
1
8
Aug 10, 2020
Holes do not line up with Oatey flange, does not fit underneath
I need a spacer to get flange to tile height. Since I re-did the entire setup, I am using a new flange also. I want to place spacers on the tile backerboard so I can get to tile height without having to screw thru the tile. Drilling pilot holes thru porcelain tiles is not easy, so using the spacer is the preferred option. This also eliminates any concern of a broken PVC spacer when using a flange with SS ring. The PVC spacer will not see any stress other than being pushed straight down.
Two issues with this item. I am using an Oatey flange with SS ring which has screw holes, as does the spacer. Except that the holes do not line up at all. Same brand, same # of holes, but only 2 line up. Brilliant job Oatey.
Second issue is this will not fit underneath the Oatey flange, only on top. This is not stated anywhere that I can find. I would return, but since my HD has zero other options, I am stuck modifying this flange if I want to get this toilet installed quickly.
PVC quality is good and set on top of flange well, but screw holes would still need to be modified.
by
Feb 11, 2019
Excellent product but check the closet bolt pattern in your existing flange. Toilet flanges have ...
Excellent product but check the closet bolt pattern in your existing flange. Toilet flanges have cut-outs to accept the head of the closet bolt. You then slide the closet bolt to a narrower portion of the slot in the flange that keeps the head of the closet bolt secure when securing the toilet. Some toilet flanges require the bolts to be moved in a clock wise direction (and this spacer will work quite nicely with those flanges). Other flanges require the bolts to be moved in a counter clock-wise direction which could be problematic if you ever needed to remove your closet bolts. Just line up the space with your flange to make sure everything lines up - especially closet bolt slots before installing.
The product itself is strong and well made. I picked this up to use in a bathroom where I removed the old tile floor and laid down under floor heating before installing the new tile floor. This flange gave me the height I needed for the increased height of the new floor.
by
Dec 10, 2018
Working on a home that the toilet flange is lower than the flooring and this spacer did the trick...
Working on a home that the toilet flange is lower than the flooring and this spacer did the trick. It’s pretty much self explanatory but i did have some difficulty lining up the holes to the actual flange. But in the end it worked out. It was pretty easy to install Just some silicone between the flange and the spacer and screwed it down. The 1/4 inch thickness was exactly what I needed to raise it above the flooring a bit. PVC material it’s made of seems pretty solid and when I screwed it down and finished the install I felt good it held up good to any tightening I did. Good product and i had no leaks. I’d recommend it to anyone with the flooring being higher than the flange.
by
Dec 6, 2018
I needed to raise my toilet flange up because it was sitting below the tiles. When I installed a ...
I needed to raise my toilet flange up because it was sitting below the tiles. When I installed a new ceramic tile floor. The flange should sit on top of the tiles. I went to Home Depot and picked up a Oatey 1/4 in. PVC flange spacer. The spacer is white in color and 7 in. in circumference and has 6 anchor holes to secure the spacer to your original flange and subfloor. This spacer is really durable PVC and made very well.
I cleaned the existing flange and used silicone between the flange and spacer and then I screwed it to the floor. The manufacturer recommends using no more than 3 spacers per application. I want to let you know this spacer is not a toilet flange.
If I called a plumber in to fix this, he would have wanted to cut the waste line and extend the pipe and install a new toilet flange. This would have been very expensive. Thanks Oatey I enjoyed using the 1/4 in. Flange spacer. It was a breeze to install. This Oatey spacer will save you time and money. I recommend this product if you run into the same problem I did with the floor.
by
Nov 15, 2023
by
Nov 10, 2023
by
Nov 1, 2023
Returned, ended up we did not need it.
by
Oct 25, 2023
by
Oct 18, 2023
The Oatey 1/4 spacer solved the problen. Put a new floor down and the existing flange was too low. Placed silicon under the flange spacer bolted it to the old metal flange and no leaks!
by
Sep 13, 2023
The spacer is what I needed to create a good installation for a new toilet. My situation called for using two wax rings in addition to the spacer but it worked great.
by
0/0
Compare Similar Items
Material | |||
|---|---|---|---|
PVC | PVC | PVC | PVC |
Flange Type | |||
Flange repair ring | Anchor flange | Anchor flange | Anchor flange |
Features | |||
No Additional Features | No Additional Features | No Additional Features | No Additional Features |
Related Searches
Related Products
Oatey Fast Set Closet Flange quickly and easily connects a water closet outlet to a plumbing system and sits flush with the floor. Available in a variety of materials and styles, this toilet flange includes four screw holes for easy installation. The Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey Fast Set Closet Flange quickly and easily connects a water closet outlet to a plumbing system and sits flush with the floor. Available in a variety of materials and styles, this toilet flange includes four screw holes for easy installation. The Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey Fast Set Spigot Fit Closet Flange quickly and easily connects a water closet outlet to a plumbing system and sits flush with the floor. It includes 6 countersunk holes and two toilet bolt slots for secure attachment to the floor. Oatey products have earned the trust of plumbing professionals for over 100 years.
Oatey Fast Set Easy Tap Hub Closet Flange is available in a variety of materials and styles, with a test cap that easily and cleanly breaks out, eliminating the possibility of falling down the DWV line. Includes six screw holes designed to meet any toilet installation type and provide secure attachment to floor. Oatey products have earned the trust of plumbing professionals for over 100 years.