#1 Home Improvement Retailer

Internet #

301505463

Model #

33564

Store SKU #

237720

2 in. Galvanized DWV Pipe Hanger

$3.22
  • Pipe hanger built to hold DWV pipes in place
  • Enables the expansion and contraction of multiple pipes
  • Diagonal nail holes let you fit the hanger in small areas
  • View More Details
Store
0 in stock
caret

Product Details

Piping secured to wall with clamps

Supply & Pressure

Clamps, brackets, and hooks can be used to complete DWV, potable water, and heating pipe installations.

Piping protected with safety plate

Guards & Plates

Stud guards and FHA safety plates provide protection for pipes and wiring installations.

Piping hung from ceiling with j-hook

Drain Waste & Vent

J-hooks, hanger straps, and duct ties can be used to secure and support piping below the wall, ceiling or floor.

Tools icon

Easy to Install

Easy to install and require minimal tools for assembly.

PVC, CPVC, and ABS pipe icon

Variety of Materials & Sizes

Accommodates various different pipe sizes and materials.

Pipe icon

Support

Ensures secure support to the wall, ceiling, or floor.

J-hook icon

Protection

Helps to protect piping system once installed.

Plastic DWV pipe hanger

Hangers

Pipe hangers can be used to secure supply lines and DWV pipes.

Pipe secured with clamp and nail

Clamps

Pipe clamps with nails allow for a quick and easy installation for copper tube piping.

J-hook pipe holder

Hooks

DWV j-hooks provide a fast, easy, and economical way to secure drain piping.

Galvanized metal hanger strap

Straps

Metal hanger straps offer a quick and inexpensive way to hang pipes from joists and rafters.

Safety plate protecting DWV piping

Studs & Safety Plates

Stud guards and FHA safety plates provide protection for pipes and wiring installations.

Pipe support bracket nailed into wall

Brackets

Brackets help to position the copper water distribution pipes for sinks, lavatories, and other fixtures.

Oatey Galvanized DWV Pipe Hangers are designed for use with PVC, ABS, galvanized, black iron and cast iron piping. Made of galvanized steel, these pipe hangers are available in a variety of sizes and enable the expansion and contraction of multiple pipes. An adjustable strap and keyholes allow for fast installation, and pre-loaded ring shank nails are corrosion resistant. Oatey products have earned the trust of plumbing professionals for over 100 years.
  • 2 in. galvanized steel pipe hanger
  • Supports DWV piping systems to joists and rafters
  • Enables the expansion and contraction of multiple pipes
  • For use with PVC, ABS, galvanized, black iron and cast iron piping
  • Adjustable strap and keyholes for fast installation
  • Fits 2 in. pipes
  • Pre-loaded ring shank nails are corrosion resistant
  • Rigorously tested and proven to last in many conditions
  • Return Policy
  • California residents
caret

Specifications

caret

Questions & Answers

2Questions
caret
Q:How much weight can it carry?
by|Dec 13, 2021
1 Answer
Answer This Question

A:  The galvanized hanger has a safe working load of 46LBS but is only as strong as the items securing it to the object hanging from.

by|May 3, 2023
    1 found this answer helpful
    caret
    Q:how long is the strap part above the part that clamps onto the pipe?
    by|Jun 24, 2020
    1 Answer
    Answer This Question

    A:  9"

    by|May 3, 2023
      2 found this answer helpful
      Showing 1-2 of 2
      caret

      Customer Reviews

      4.5 out of 5
      (25)
      • 4.5
        out of 25 reviews
      • 100% recommend this product
      Filter by:
      Showing 1-10 of 25 reviews
      I recently installed a new sump pump in my basement. I used a 2-inch PVC pipe for the ejection li...
      I recently installed a new sump pump in my basement. I used a 2-inch PVC pipe for the ejection line. The distance from the pump to where the line exited the building was about 60 feet and so there were several spots where the pipe would go "thump" when the pump turned on and then off. To get this to quit, I used a series of 2-inch Galvanized DWV Hangers. I used some with the plastic coating and some without and it didn't seem to make any difference. Both types totally eliminated that annoying thumping sound.
      by
      • Recommended
      This all metal galvanized pipe hanger works fine for most needs, copper, PVC, etc. Exact measurem...
      This all metal galvanized pipe hanger works fine for most needs, copper, PVC, etc. Exact measurements are included with the pictures in my review. It's inexpensive and easy hangs onto wood or concrete walls with the appropriate fasteners (not included). I use these to support runs of cable as well as plumbing, under rafters, and what not. They also work great for hanging tools in the shop, strong and sturdy and inexpensive. What more could you ask for? I'd recommend it.
      by
      • Recommended
      2 found this review helpful
      Great Hanger. This is being used for my Water Heater to keep the pipe from vibrating. It is ma...
      Great Hanger. This is being used for my Water Heater to keep the pipe from vibrating. It is made from a durable aluminum and is very sturdy. The lock screw loosens and tightens very easily, I bent the metal are after measuring it with my hand, so as sturdy as it is, it performed without any special metal bending machine. After installation it did the job it was meant to do.
      by
      • Recommended
      6 found this review helpful
      This product is a good solution for securing a 2” drain line. It is easy to use and to bend into ...
      This product is a good solution for securing a 2” drain line. It is easy to use and to bend into place to navigate any plumbing obstructions. Once in place, the hanger holds the pipe securely, helping to minimize pipe vibrations and damage. The galvanized metal construction should hold up well without rusting in damp and humid environments. The installation might be easier to complete in tight quarters if you consider loosely placing the collar onto the pipe and sliding it along the pipe to the supporting location, before securing the strap to a joist and tightening the pipe collar. That's what I did. A good product I would recommend to others.
      by
      • Recommended
      The Oatey pipe hanger is the easy way to support a 2" DWV pipe. It is made of galvanized steel ma...
      The Oatey pipe hanger is the easy way to support a 2" DWV pipe. It is made of galvanized steel making it strong. It has a removable adjustment screw that can be adjusted up to 2 1/2" and even though it is made for 2" you could support a pipe that is smaller. After you have the hanger around the pipe or item to be supported you attach it to the joist or other fixed object with nails or screws.
      by
      • Recommended
      by
      • Verified Purchase
      Incorrect Size
      This item is NOT 4” dia! It is 4.5” dia minimum. Please correct this
      by
      Response from OateyJun 1, 2023
      Thank you for writing a review. We realize your experience with our product has been less than ideal and we would like to have the opportunity to change that, as quality is a top priority at Oatey. If you are still having issues with this product, please reach out to us directly at technical@oatey.com so that we can help. Oatey
        • Recommended
        by
        • Verified Purchase
        Fairly easy to install...
        Fairly easy to install
        by
        • Verified Purchase
        by
        • Verified Purchase
        Showing 1-10 of 25 reviews

        Frequently Bought Together

        +
        +
        Price:
        $322