From hot to cold, wet to dry, Oatey has the solvent cement to meet your exact pipe installation requirements.
Oatey solvent cements are developed through extensive research on behalf of the professional plumber.
Oatey gives you the confidence of a top-selling brand, backed by years of leadership in the plumbing industry.
Determine pipe type and size.
Chamfer and clean pipe and fitting.
Prime PVC or CPVC pipe, (primer not required for ABS pipe).
Oatey's solvent cements are Lo-VOC meaning they are compliant with SCAQMD Rule 1168 and OTC standards.
Oatey's solvent cements meet NSF standads to support certain building code requirements.
Oatey's solvent cements meet UPC standads to support certain building code requirements.
Oatey's solvent cement and primer products are UL Greenguard Gold Certified.
Oatey's solvent cement and primer products are suitable for all pipe types and multi-purpose jobs.
Oatey's solvent cement and primer products have variable set and cure times.
This cement is not approved for that application. Oatey would recommend following the manufacturer of the hose instructions on how to join their product.
Most of these glues are immediate bond. Once you apply coat to both pipe and fitting and push straight in your bonded in 5 seconds on most sizes. The only way I have slowed it down it when it’s cold as heck outside.
I used in pool plumbing
Drying time is a matter of a few short seconds. The can indicates up to 12" pressure and up to 18" non pressure
Not sure what exactly SDR is however if it PVC it should be fine.
Don't think so.
Not sure if it will as the cement doesnt run to be able to seal leak from one end to the other.
If your piping is under 12" then it should hold up nicely.. I've had very little experience with wells and pumping pressure. However my limited understanding is the the pressure is on the low end. Which is why I say it should work just fine.