#1 Home Improvement Retailer

Internet #100139480

Model #43539

Store SKU #728000

4 in. PVC Open Toilet Flange Replacement

  • Toilet flange constructed of durable PVC
  • Closet flange made for use with existing flange repairs
  • Fits into 4 in. PVC pipe and cast iron pipe
  • See More Details

Product Overview

Closed toilet flange

Testable Closet Flanges

Made with a test cap that easily and cleanly breaks out, eliminating the possibility of falling down the DWV line.

Metal toilet flange ring flush with the bathroom floor

Open Closet Flanges

Ring provides a crack-resistant connection between the water closet outlet and plumbing system that is flush with the floor.

ABS toilet flange with metal ring

Spigot Fit Closet Flanges

Spigot fit sits flush with the floor and allows for a quick and easy connection to the piping system.

PVC open toilet flange

Open

The open toilet flange requires a test plug or cap for pressure testing and is primarily used in repair work.

PVC closed toilet flange

Closed

The closed toilet flange with pre-installed ability for pressure testing is primarily used in new construction.

PVC with metal ring flange

Specialty

The 45-degree and offset specialty toilet flanges allow for margin of error in drain/pipe alignment.

ABS repair flange

Repair

The repair toilet flange replaces broken cast iron flanges.

Flange fitting inside pipe

Repair/Remodel Connection

Inside fit. Not code approved.

Flange fitting outside pipe

Inside/Outside Connection

Inside/ouside fit.

Flange fitting outside pipe

Hub Connection

Outside fit.

Flange fitting with spigot connection

Spigot Connection

Same size as pipe. Requires fitting.

Flange fitting pipe offset

Offset Connection

Inside/outside fit.

Flange fitting inside pipe

Twist-N-Set Connection

Inside fit. Not code approved.

This Oatey 4 in. PVC DWV Replacement Closet Flange features a rubber compression gasket that enables the flange to be used on many types of cast-iron piping. Installs without a need to tear up your flooring or caulk the cast-iron piping. Fits inside 4 in. cast-iron or Sch. 40 DWV piping (sold separately).
  • PVC construction
  • Rubber compression gasket enables the flange to be used on many types of cast-iron piping
  • 3 stainless-steel bolts are tightened to compress the rubber gasket to secure the flange to the existing piping
  • Easy to use
  • Compression joint provides up to 3 in. of adjustment to the riser
  • Use as a replacement flange for broken flanges

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Toilet Flanges

4 in. PVC Open Toilet Flange
current product
4 in. PVC Open Toilet Flange Replacement
1.5 in. Spud Assembly Kit, Polished Chrome
BrandOateyOateyAmerican Standard
Name4 in. PVC Open Toilet Flange4 in. PVC Open Toilet Flange Replacement1.5 in. Spud Assembly Kit, Polished Chrome
Price
Ratings
(98)
(91)
(0)
MaterialPVCPVCSteel
Plumbing Part TypeToilet FlangeToilet FlangeToilet Kit
View ProductView ProductView Product

Specifications

Dimensions

Product Depth (in.)
4.25
Product Height (in.)
2
Product Width (in.)
4.25

Details

Color/Finish Family
White
Flange Included
No
Flange Type
Flange repair ring
Material
PVC
Pack Size
1
Plumbing Part Type
Toilet Flange
Provides Extension
No
Returnable
90-Day
Sleeve Included
No

Warranty / Certifications

Manufacturer Warranty
1 year

Questions & Answers

33Questions27Answers

With this work with and ABS drain pipe? Does it need to be glued, or is tightening the bolts suff...

Asked by Mario September 21, 2020
2
Answers

Yes, ABS or Galvanized Pipe. Tightening the bolts , easy install.

How much should we tighten the seal on the Oatey ABS cast iron toilet flange?

Asked by Dennis July 1, 2020
2
Answers

I tightened it by going around trying to keep equal pressure all around. I started out snugging it, then tightening each screw little by little. I was using a t-handle hex wrench and tighten it as much as it would go. It’s the best product to solve my broken flange issue.

I have a 3" cast iron pipe, is there a 3" model of this item?

Asked by michaelt721 June 10, 2020
1
Answer

No there is not.

I need to add some height to my flange and also the Jonny bolt brackets are rusted off of cast ir...

Asked by Guy May 22, 2020
2
Answers

Hey Guy. I used this for a bathroom I renovated a couple years ago. It worked really well and have had no problems. You have to remove the old flange and clean out the inside of the cast Iron pipe as well as you can. Before you insert the new flange, Spray it with soapy water. This will help secure the seal. Insert the flange to the desired height and tighten the Allen bolts inside. This will squeeze the rubber at the lower part of the flange and make a tight seal. I used this youtube video that was really helpful. https://youtu.be/nzfW6iCK_pw Good luck!

Does this fit inside a 4 inch PVC pipe?

Asked by Ben March 23, 2020
2
Answers

yes,perfectally.

Is this product available for 3 in. cast iron pipe?

Asked by DRO March 9, 2020
1
Answer

No, this product is not available for 3 in. as o this moment.

Won't putting this inside my cast iron flange raise the toilet up higher?

Asked by PaKettle January 6, 2020
6
Answers

Not really. Every case is different, but in the three I used there were none that raised mine. I Used the Glacier Bay ONE PIECE DUAL FLUSH toilets and they all fit Flush. (PUN INTENDED) Hope this helps ALSO the seal is perfect so have had ZERO ISSUES there.

OATEY 4 in. PVC DWV Replacement Closet Flange I am replacing a flange that had 4" PVC with a 6"...

Asked by Pinon October 22, 2019
1
Answer

Barrel length is 3 3/4".

Can you use a flanged wax ring with this product

Asked by Johnnyo August 22, 2019
5
Answers

I did with no problem.

On an old system, will the flange prevent gases from seeping out? If the floor below is concrete,...

Asked by Homeplumber February 4, 2019
5
Answers

It really doesn't have anything to do with what the floor is comprised of. Once you remove the old flange, clean out about 5 inches of the inside of the drain. This slips inside the existing drain. Spray the black, rubber gasket and the inside of the drain with soapy water, insert and tighten the three bolts inside the flange with an Allen wrench. This will squeeze the gasket so it bulges out and make a tight seal. This video is great. https://www.youtube.com/watch?v=nzfW6iCK_pw

4 in. PVC Open Toilet Flange Replacement - page 2

Customer Reviews

  • 4.7
    out of 91 reviews
  • 87% recommend this product
Filter by:
Showing 1-10 of 91 reviews
Very easy to use made my life easier
Very easy to use made my life easier
by Dave
2 people found this helpful
Best product ever. You don't even need flange bolts, we just put them in because we bought them a...
Best product ever. You don't even need flange bolts, we just put them in because we bought them already. Easy to install. I would recommend to anyone.
by Jay
2 people found this helpful
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Only problem is mentions screws on casting but not on...
Only problem is mentions screws on casting but not on instruction paper.
by HomeDepotCustomer
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
by Ben
Installed well enough but when attempted to unscrew and adjust...
Installed well enough but when attempted to unscrew and adjust the nuts 1 stripped, bad design....the hex nuts are only held by the plastic casing. Some design improvement with metal to hold would greatly improve the product
by Mike
It worked as designed....
It worked as designed.
by Ed
I used this flange to piggyback on top of an...
I used this flange to piggyback on top of an old iron flange after tiling floor in order to raise the height, seems like a much sturdier connection to toilet with more integrity than a spacer. I think this will be around for the long haul.
by Ricardo
Excellent choice to replace damaged flange.
Excellent choice to replace damaged flange.
by Joe
Showing 1-10 of 91 reviews