Brickwebb Cafe Mocha Thin Brick Sheets - Corners (Box of 3 Sheets) 21 in x 15 in (5.3 linear ft.)

Hi, It cuts easily with an angle grinder or wet tile saw. For more information please check out the spec sheet on our website; https://www.oldmillbrick.com/brickwebb-sheets-flats-castle-gate. Thanks!

One method is to use just the flat bricks. Brick all the way up the corner and then grout the corner joint. We only sell corner piece bricks that fit on a 90 degree angle. Those will not work for other degree angles.

If you remove bricks from the webbing, then you can space them any way that fits your space bests. Very simple to do.

The color castle gate is all the same color in the Brickweb and the individual , the corners are also the same color in the castle gate.

Yes, our castle gate Brickweb corners and Brickweb flats are the same color.

With the correct blade you can use: Wet tile saw, 4" Angle grinder, 7" Angle grinder, or Circular saw.

Yes, but the bricks will need to be sealed.

You will need 4 sections, as each section makes one corner. It can be cut. I do not know how tall your column is. If the column is shorter than the height of this corner, then maybe! Check the dimensions. As far as it being outdoors, as long as the adhesive is waterproof, it will work. .

Each box comes with 3 separate corner sheets. Each sheet is like 8 bricks tall. I remodeled my fireplace, which juts out of the wall by 12 inches. I used 2 full sheets on each side corner and then a few bricks more on each side. I think my bricking is about 4 feet tall or so.