Olympic Waterguard Protects your deck from water damage, and protects against mold and mildew growth.
Use on vertical or horizontal new wood, pressure treated wood or weathered wood.
Olympic Waterguard offers a ready to use wood stain that dries in 12-24 hours when applied at 50°F to 85°F.
The size of your project will determine how much stain you need. Solid stain color requires two coats.
Sweep debris from deck, then use Olympic Premium Deck Cleaner to wash away dirt and stains caused by mildew.
Tape off surfaces you don't want stained. Avoid staining decks in direct sunlight to avoid uneven drying.
For even coverage, apply the stain to one board at a time. For best results, backbrush into the wood surface.
Clear finish allows your wood to weather and gray naturally. Least Protection, Most Wood Grain.
Slight hint of stain color that highlights wood grain. Less Protection, More Wood Grain.
Rich stain color that allows wood grain and texture to show. More Protection, Less Wood Grain.
Same rich color as semi-transparent but hides more wood grain. More Protection, Least Wood Grain.
Fully opaque color covers the wood grain and accentuates the texture. Most Protection. No Wood Grain.
Create a new, durable surface on worn or weathered wood and concrete.
A: Hi there, we would not recommend putting wood sealer over polyurethane.
A: This would not be recommended for that application. Feel free to give us a call at 1-800-441-9695 to discuss your project in further detail.
A: Apply product only when air, product and surface temperatures are between 50ºF (10ºC) and 90ºF (32ºC). Avoid application in direct sunlight or on hot surfaces. It is not recommended to apply product if rain is expected within 24 hours. Surface temperatures can be significantly lower than air temperature so just be aware of that.
A: Durability depends on sun exposure, surface preparation and product application, To determine if it’s time to reapply, test wood for absorbency by sprinkling water on the surface – if water is absorbed within 30 sec. to 2 min., depending on climate, the surface is ready for finishing. If the wood is not absorbing the water, let the wood weather longer and re-test.
|Name||Waterguard 5 gal. Clear Multi-Surface Waterproofing Sealant||1 gal. Raincoat Clear Water-Based Water Repellent Sealer (4-Pack)||1 gal. Raincoat Clear Oil-Based Water Repellent Exterior Wood Sealer (4-Pack)||5 gal. Advanced Waterproofer Clear Natural Finish Multi-Surface Sealer|
|Paint/Stain Features||Dries Clear,Mildew Resistant,Moisture Resistant,Waterproof||Dries Clear||Mildew Resistant,UV/Fade Resistant,Waterproof||Dries Clear,Mildew Resistant,Moisture Resistant,UV/Fade Resistant,Waterproof|
|Base Material||Water Based||Water Based||Oil Based||Water Based|
|Surface Location||Pool Deck||Deck||Patio||Deck,Driveway,Garage Floor,Patio,Pavers,Pool Deck|
|Container Size||5 Gallon||1 Gallon||1 Gallon||5 Gallon|
|Stain & Sealer In One||No||No||No||No|
|Coverage Area (sq. ft.)||750 sq ft||250 sq ft||250 sq ft||100 sq ft|
|View Product||View Product||View Product||View Product|