#1 Home Improvement Retailer

Internet # 205687672

Model # RF32

Store SKU # 911252

R- 15 Faced Fiberglass Insulation Roll 15 in. x 24 ft. (1 Roll)

Covers 30 sq.ft. ($1.00 /sq.ft.)
$29.95
Apply Now
Pay $4.95 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • R-15 faced insulation, easy 2x4 wall install
  • Advanced fiber technology for faster, more precise install
  • Shed-resistant, for less dust and easier cleanup
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret

Product Details

Owens Corning PINK Next Gen Fiberglas insulation installs faster because it's made like no other fiberglass insulation. PINK Next Gen fiberglass insulation rolls recover instantly, cut and split cleanly, glide in easily and stay put in the cavity, helping deliver inspection-ready results faster, they feel soft as cotton and are shed-resistant for more comfort and less cleanup on every job. and their advanced fiber technology creates a tightly woven network of soft, fine fibers to form a super-resilient blanket of insulating micro-pockets that deliver exceptional performance.
caret

Specifications

Dimensions

Cover Area Per Bag (sq. ft.)30 sq ftCoverage Area (sq. ft.)30 sq ft
Product Length (ft.)24 ftProduct Thickness (in.)3.5 in
Product Width (in.)15 in

Details

Bag Size1.25 ft. x 19.1 in. x 15 in.Batt/Roll Size24 ft. x 3.5 in. x 15 in.
Compatible Install SurfacePlywoodFaced or UnfacedFaced
Insulation FeaturesFormaldehyde FreeInsulation Location2x4 Wall
Insulation R-ValueR15Insulation TypeFiberglass Insulation
Number of Pieces1Pack Size1
Product Weight (lb.)13 lbReturnable90-Day
Roll or BattRoll

Warranty / Certifications

Warranty InformationLimited Lifetime
caret

Questions & Answers

102Questions
caret
Q:I'm insulating a shed for an office. The studs are 12 on center instead of 16 . Is it better to buy the 24 width and cut it in half or should I buy the 15 and cut it back or is there a better option? The ceiling is 24 but the rest 12
by|Nov 14, 2023
1 Answer
Answer This Question

A:  Hello JoJo, Owens Corning does not manufacture a batt product that is 12" wide. Cutting a 24" batt in half will produce less waste, but either option is acceptable. Thank you for your inquiry!

by|Nov 14, 2023
    caret
    Q:I need to insulate a 3 sided framed enclosure that houses a 6 type b flue pipe. Is R-15 faced with the face side closest to the pipe the proper way to install the product or should the fiberglass side be closest to the pipe?I understand that 6 is code.
    by|Oct 31, 2023
    1 Answer
    Answer This Question

    A:  Hello Kshlbly1988, To properly answer your question we will need some additional information. Please contact Owens Corning at 1-800-Get-Pink (438-7465). Thank you for your inquiry!

    by|Oct 31, 2023
      caret
      Q:Does Thais insulation can get fired when it is around the steam hot pipes from the boiler?
      by|Oct 24, 2023
      1 Answer
      Answer This Question

      A:  Hello Bian, the Pink Next Gen Insulation has a service temperature of 250° F. The kraft facing does need to be in contact with a 15 minute thermal barrier such as 1/2" drywall. Thank you for your inquiry!

      by|Oct 25, 2023
        caret
        Q:700sqft how many rolls
        by|Sep 3, 2023
        1 Answer
        Answer This Question

        A:  Hello Jill, each roll would cover 30 square feet. Thank you for your inquiry!

        by|Sep 5, 2023
          Showing 1-4 of 102
          caret

          Customer Reviews

          4.7 out of 5
          (527)
          • 4.7
            out of 527 reviews
          • 91% recommend this product
          Filter by:
          Showing 1-10 of 527 reviews
          Great Product Easy to Use ..Unroll and Cut to Size Good Price
          by
            Poor manufacturing quality. The face sheets were either placed on crooked; and on many roles, the face was really dirty probably from bad rollers that were all dirty from the black inter vapor barrier material. So the outside face looked like it had specks of mold on it. Also, there are no reference guidelines on the face (just a suggestion). Of course all that will be covered up once the drywall goes on, but the point is that Owens Corning (in my opinion) has suboptimal quality control.
            by
            • Verified Purchase
            As with any kind of insulation, I made sure to...
            As with any kind of insulation, I made sure to wear disposable coveralls, mask and gloves. Easy to roll out, cut using snap-off blade cutter and installed. This product is soft to touch and installs well. Will be buying some again when I finish my next room.
            by
            • Verified Purchase
            Easy to use
            Easy for me to cut into the sizes i needed, but needed to keep my blade sharp.
            by
            • Verified Purchase
            • Recommended
            It was perfect for my knee walls in the guest bedroom . Nice and easy !
            It was perfect for my knee walls in the guest bedroom . Nice and easy !
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            This is my first experience working with fiberglass insulation--I used between studs in 2x4 walls...
            This is my first experience working with fiberglass insulation--I used between studs in 2x4 walls. The fiberglass doesn't shed much after it is cut, which was a pleasant surprise. I had suited up with dust mask, goggles, gloves and long sleeves. But, I found if handled gently, it didn't seem to shed at all. So, I just used gloves and did all the cutting outdoors. The insulation held itself in place between the studs, so I didn't have to staple right away. I was able to do the stapling after I did all the cutting and filling the spaces. That was very efficient. I used a pneumatic stapler which is so much better than a manual staple gun. Highly recommend using one.
            by
            • Verified Purchase
            • Recommended
            2 found this review helpful
            The insulation was extremely easy to work with. Not a lot of of mess for most work other than cut...
            The insulation was extremely easy to work with. Not a lot of of mess for most work other than cutting small chunks for tight spaces. Looks great!
            by
            • Verified Purchase
            • Recommended
            1 found this review helpful
            Worked well. Our builder (Century Communities)failed to insulate the exterior wall sufficiently, ...
            Worked well. Our builder (Century Communities)failed to insulate the exterior wall sufficiently, causing the water lines to our master batroom to freeze during the extreme cold weather. I packed the wall with additional insulation which has resolved the problem.
            by
            • Verified Purchase
            • Recommended
            Easy to cut and use. Adds warmth to existing walls and attic. Sound dampening capabilities. Grea...
            Easy to cut and use. Adds warmth to existing walls and attic. Sound dampening capabilities. Great value! (Used to replace insulation when adding an exterior vent)
            by
            • Verified Purchase
            • Recommended
            Had a hallway going into my cellar needed to put insulation up to keep my utility room warm the i...
            Had a hallway going into my cellar needed to put insulation up to keep my utility room warm the insulation went up without a hitch and the room is a lot warmer
            by
            • Verified Purchase
            • Recommended
            Showing 1-10 of 527 reviews