2-3/8 in. Gray Heavy-Duty Workbench Caster with 400 lb. Load Rating (4-Pack)

These puppies work really well for me. They give plenty of lift and that is one thing I need. I used these on a base I made for my wood lathe. Total weight about 275 lbs. To keep the mess down I move my tools outside. Yes, even in January because I live on the west coast of Arizona. The reason I only gave 4 stars is the collapse on me when I hit a wide expansion seam on my sidewalk. I have to make sure I turn as much sideways as possible to prevent that.

I had 2 separate cabinets with drawers, from a bathroom remodel. Mounted them together, raised it about 4". Added a top with some scrap plywood I had. Added these to move it around easily. Just put them on, works great for my small 4' wide work bench. Well worth it for the purpose.

Looking for some way to roll my workbench around and still have the stability when needing to wrestle a heavy project on the workbench without it moving. These work great. The only down side is the screws that come with the casters. They are an 1-1/2 " long. The legs on my workbench are 4x4's, so I put 1/4" bolts thru the legs and secured with nuts and washers for better security.

These workbench casters are awesome for my large workbench. I would have given them 5 stars if they lifted just a little higher because when they are on the up position and swivel to the inside,(see picture) they are just touching the floor making it just a little stiff when you push the lever down to lift them. But for what they do it’s not that big of a deal. I would definitely recommend them.

These workbench casters are great. I was concerned that it would not handle the weight of the bench and the equipment that I store on the bottom shelf. But they handled it like a champ, the workbench can be moved around my shop with ease. Highly recommend them.

The faster wheel worked great. Easy to install too. Here's a short video installing them and seeing them in action. https://youtu.be/F7aGfoKdyRM

Ordered these about a month ago for a work bench I was building for my daughter's garage. I was skeptical that these casters could lift a solid wood work bench (constructed with 7- 2"x4"x8' for the frame and a solid core door as the bench top). Much to my surprise, the casters lift that work bench using little to no effort! Wasn't necessary to grab the bench top and pull up to 'help' the wheels roll into place. Just a gentle downward push with your foot is all that's required. Within a few seconds the bench is up and mobile. Even with the bench top and shelf loaded with power tools, the casters still performed smoothly. Good clearance once it's up too. A must-have for small shops that need to get heavy obstacles out of the way. The casters and hardware are very sturdy. All four wheels turn 360 degrees. Installation requires two simple measurements and two drilled holes. Very simple. I have no complaints with this product. However, I think it is worth noting that with the casters attached it lengthens the footprint of the bench by approximately 12 inches. I like these so much, I bought a set to put on my own work bench.

I bought these heavy duty casters for a workbench I built that doubles as an extension to my table saw. They were easy to install and the screws are included. The castors effortlessly lift my table even when loaded with tools. The wheels also come in handy when something falls behind the bench. The casters can handle up to 400lbs, but my 6' bench doesn't weigh close to that even with an MDF top and shelf. The wheels operate smoothly and while the wheels are mounted 2" from the bottom of each leg, they lift the bench between 1/4" - 1/2"-- enough to move the bench without issue. In building the bench I had to consider that the casters add 6.5" to each side and then I added another 1/2" to allow my foot or hand to engage the wheels. Overall, I really like these. If these weren't so expensive, I'd get another set for my other bench.

this is my work bench, there are many like it, but this one is mine. and these caster move it smooth as silk!

Ordered these to put on my 4x8 workbench with 4x4 legs and two sheets of plywood,very easy instructions and easy to install.These move the workbench with ease with one person around my garage ,great product and heave duty built