|Product Depth (in.)||1.75 in||Product Height (in.)||4.5 in|
|Product Width (in.)||3 in|
|Accessory Type||Fuel Cell||Air Tool Type||Accessory|
|Compressor/Air Tool Features||No Additional Features||Included||No additional components or accessories are included|
|Product Weight (lb.)||0.34 lb||Returnable||90-Day|
|Tools Product Type||Power Tool|
A: This is not the same. We recommend using only Paslode fuel with cordless Paslode tools.
A: Hello Hitachi. It appears the Paslode fuel can fit the NT65 Ga. There is an adapter in the fuel cell that allows it to fit this tool and the older Paslode NiCad tools. For the best performance we suggest using Paslode tools and fuel.
A: Thank you for the question. Please contact your local UK Paslode Team for more information. https://www.itwcp.co.uk/en/
A: We generally do not recommend doing this as the formulation is slightly different and the dosing is definitely different. We cannot guarantee that the nailer will perform over an extended period of time. Using the wrong fuel cell could cause product failure so please proceed with caution.
A: Yes! I used to do this all the time with my older Paslode finishing nailer. The new nailers, like the one I have now, won't accept the larger fuel canister. All you need to do is swap out the spray head. Use your old spray nozzle on the new framing canister fuel cell. I think the spray heads adjust the disbursement of a different amount of fuel for the framer or the finishing nailer.
A: My finish nailer and framing nailer definitely have different fuel cells. I don't know about older models.
A: No, different gas mixture. It could damage your tool