#1 Home Improvement Retailer

Internet # 203218194

Model # PB 312-1.5BR

Pipe Boot for 1.5 inch I.D. Vent Pipe Brown Color New Construction/Reroof

$21.97
  • Efficiently withstands extreme weather conditions
  • Designed for use with 3/12 to 12/12 standard roof pitches
  • Provided with a nailing flange for easy fastening to roof deck
  • View More Details
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

The Perma-Boot 312 is a high performance vent pipe flashing designed for new roof and re-roof applications. The patented design allows for use on roofs pitched from 3/12 to12/12. Compatible with PVC an all other vent pipe types. A nailing flange is incorporated for traditional fastening to roof deck. Avoid using old fashioned vent pipe flashings that utilize rubber or neoprene gaskets to seal out water which fail in a matter years allowing water to enter the home and cause damage to sheetrock, insulation, paint and hardwood floors etc. The Perma-Boot will stand up to all weather extremes and is warranted for the life of the shingle. Available in Black, Brown, Weathered Wood and Gray to match your shingles. Made in the USA.

Highlights

  • Provides permanent protection from costly vent pipe gasket leaks
  • Designed for all standard roof pitches - 3/12 to 12/12
  • Simple installation with nailing flange for fastening to roof deck
  • Suitable for asphalt shingles, wood shake, slate, terra cotta and composite roofing materials
  • Return Policy

Product Information

Internet # 203218194

Model # PB 312-1.5BR

Additional Resources

Shop All Perma-Boot

Specifications

Dimensions

Pipe Diameter (in.)

1 1/2

Product Length (in.)

14.75 in

Product Thickness (in.)

.0625

Product Width (in.)

11 in

Details

Color Family

Brown

Features

Corrosion Resistant, Extreme Heat, High Impact/Hail Resistant, High Wind Resistant, Ice and Water Shield, Rust Resistant, Water Resistant, Waterproof

Flashing Type

No Caulk Vent Pipe

Gauge

.03

Material

Plastic

Pack Size

1

Product Weight (lb.)

1 lb

Profile

Rain Diverter

Returnable

90-Day

Roofing Product Type

Vent Pipe Flashing

Warranty / Certifications

Manufacturer Warranty

Lifetime of shingle

Questions & Answers

2Questions
caret
Q:Can this be used with a new hole in an existing asfault roof?
by|Aug 5, 2018
1 Answer
Answer This Question

A:  Yes it is designed to be installed just like the standard vent flashing when installing a new roof

by|May 5, 2023
    caret
    Q:molded of what material?
    by|Feb 8, 2017
    1 Answer
    Answer This Question

    A:  This item is molded plastic.

    by|Jan 22, 2019
      Showing 1-2 of 2

      Customer Reviews

      3.9 out of 5

      • 3.9 out of 7 reviews
      • 100% recommend this product
      Filter by:
      Showing 1-7 of 7 reviews
      Easy to install. Fit nice and tight over my 3" Pvc vent. The original boot type developed cracks ...
      Easy to install. Fit nice and tight over my 3" Pvc vent. The original boot type developed cracks on the rubber seal. This product takes care of any further leaks. They also look a lot better than the white pvc pipe.
      by
        • Recommended
        Only works if you pipe is tall
        by
        • Verified Purchase
        only works if you have a tall vent pipe
        by
        • Verified Purchase
        Installed easily on new roof. Only complaint they attached a...
        Installed easily on new roof. Only complaint they attached a difficult to remove installation sticker on the most visible portion of the pipe covering. Had to get down off the roof and find some goo gone to remove it.
        by
        • Verified Purchase
        Roof vent
        It was easy to install and adjusts to the pitch of my roof perfectly.
        by
        • Verified Purchase
        • Recommended
        I had to do a re-roof and did my homework. I didn't want to chance any leaking in the future. And...
        I had to do a re-roof and did my homework. I didn't want to chance any leaking in the future. And I wanted a better look. Here in Connecticut Perma-Boot brand was not readily available at the supply houses the roofing contractor uses. That supply house used a different brand 3x the cost. Yikes! So I called Perma-Boot and spoke with Matt because Home Depot did not have the 3n1 design on their website. I wanted the weathered wood with the flange as seen in this picture. The picture shows brown but Matt had the weathered wood in stock in Pa. and made it happen! I ordered through Home Dept and the rest is history. All three look great and the roofing guys loved them!
        by
        • Verified Purchase
        • Recommended
        Could be better
        Ordered "brown" to match roof product is a weird brownish color that barely complements any typical brown color. Recommend black. You'll need to order the recommended adhesive from some other source as Home Depot does not have it and it is not included unless ordered direct from Perma-Boot. Note you'll need to adhere all the parts to each other or they may separate creating a larger hole to catch water. Also unless your vents are longer than necessary you will need to by extensions to the vent pipe as this product is taller than it needs to be. This product is a better solution to the cheap rubber ones but not a great answer to the problem of sealing vents.
        by
        • DIY
        • Recommended
        4 found this review helpful
        Showing 1-7 of 7 reviews

        Compare Similar Items

        current item

        Pipe Diameter (in.)

        1 1/2

        3

        3

        1 1/2

        Material

        Plastic

        Plastic

        Plastic

        Plastic

        Flashing Type

        No Caulk Vent Pipe

        No Caulk Vent Pipe

        No Caulk Vent Pipe

        No Caulk Vent Pipe

        Product Width (in.)

        11 in

        7 in

        11 in

        7.25 in

        Product Length (in.)

        14.75 in

        9 in

        14.75 in

        9 in