Hi David, Thanks for your question on the Powercare 21 in. Surface Cleaner Attachment for Gas Pressure Washer. This attachment has a 90 Day Manufacturer Warranty. - Eve
Hi Tammy Thanks for your inquiry. Try checking the o-ring. You can check with your local Home Depot for a accessory replacement trigger handle. If the trigger handle came with a pressure washer. Then available replacement parts can be ordered direct from the Master Parts Distributor Gardner, Inc. at 1-877-634-5704 or online at https://www.gardnerinc.com/. We hope this helps. Best Regards Thanks for contacting POWERCARETTI
Hello Alex Thanks for your inquiry. This Surface Cleaner Attachment comes with a 90 day Manufacturer Warranty. Normally Protection Plans are offered by the Home Depot store, For further information about Protection Plans, please contact your local Home Depot. We hope this helps. Best Regards Thank you for contacting PowerCareTTI , we apologize for the delay in response
Hello Chris! This tool is made in the People’s Republic of China under strict quality standards. Thank you for asking.
My recommendation is to disconnect and connect it again, if this does not work, you need to check the little holes of the spray nozzles, even if necessary unplug them to check inside, sometimes debris are stocked. If you have more questions you can contact me through my website mrsparkling.com Good luck!
We used it with a 4000 psi pressure washer so I'm not sure. However we didn't check the pressure of the washer so I don't really know what the pressure was. Most washers have a way to adjust the pressure so that might work for you. I think it would work just fine but you might blow a hose or something.
Did you pack the bearing with grease? If not, then water can pass through them.
Hi Dcb537. This is rated for a max pressure of 4000 psi only. Thanks for asking. Greg
If you are handy with modifications this could work but it will not be easy, and once modified I don't think you would be bringing it back to its original intended use. It's pricy and there will be lots of things that you would need to modify in order to make it work properly as an undercarriage cleaner.
Hi Gino, This should work with the 3100 psi pressure washer without issues. Thanks for asking. Greg