
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Powermate PX heavy duty air hammer is perfect for cutting, chipping, piercing, and scraping. The steel sleeve inside cylinder absorbs direct shock increasing wear resistance of tool. The double threaded hammer cylinder allows a more solid impact.
Dimensions: H 6.25 in, W 2.25 in, D 7.5 in
Air Inlet Size (in.) | 1/4 in |
|---|---|
Product Depth (in.) | 7.5 in |
Product Height (in.) | 6.25 in |
Product Length (in.) | 7.5 in |
Product Width (in.) | 2.25 in |
Stroke length (in.) | 2.60 |
Hose Included | No |
|---|---|
Housing Material | Aluminum |
Included | No additional components or accessories are included |
Returnable | 90-Day |
Tool Weight (lb.) | 3.8 lb |
Tools Product Type | Air Compressor |
Manufacturer Warranty | 2 Year Limited |
|---|
This air hammer is designed for chipping, cutting, piercing, and scraping. It is not designed for bucking rivets. While some users might have attempted to use it for this purpose, it's not the intended use and may not be effective or safe.
Notpd4, this tool is not intended to drive rods, the Air Hammer only includes the Quick-Change Chisel Retainer and a 4pc. chisel set. If you need further information, feel free to contact our product services team if you need any assistance at 1-888-895-4549. Thank you - The Powermate Team
We recommend a high quality oil specifically formulated for air tools like the Powermate 018-0059CT oil. Since this is not our product, we cannot guarantee your tools would work the same as they would using our oil. However, if the Senco oil is you're interested in using is also specifically formulated for air tools, you should be able to use it as a substitute. Senco should be able to confirm this for you, if needed.
I used this to remove very thick hardened stucco around windows and it worked really well. While stucco isn’t concrete it would likely work unless it’s a large solid area. It’s a smaller tool so depending on the project it would take longer to complete. I think it will work for your hollow tile. I also used a roto hammer which also works well but it’s a heavier tool.
Yes if you have the air compressor to run it. I used it removing mortar.
Yes, it will work great for that! Make sure to wear the proper safety gear.
The Powermate Heavy Duty Air Hammer can break concrete. Please note if doing a large area, it may take time but it will get the job done.
You hold them or put side pressure on them with your hand, that is what works for me.
It may be that the chisel is not securely held in place by the quick-change chisel retainer. When inserting the new chisel into the quick-change chisel retainer, pull back the quick-change chisel retainer and push in the chisel. Then, release the retainer to lock the chisel into place. If you need further assistance, please contact Product Services at 888-895-4549.
I doubt it.... You'd need a stronger one I think....
The Powermate Heavy Duty Air Hammer can break concrete. Please note if doing a large area, it may take time but it will get the job done.
The (3) set screws that are used in this tool are M6 x 1.0 x 5mm. They should be available in the specialty fastener section
There is 1/4" NPT inlet. You can connect directly with your air hose if it has an 1/4" NPT or recommended is using a coupler and plug system.
Viewing 1-8 of 18
4.1 out of 5