#1 Home Improvement Retailer

Internet # 305663332

Model # 22700Q

Store SKU # 1003363575

Store SO SKU # 1003266361

700XT 3/4 HP Wet Tile Saw with 7 in. Blade and Table Extension

$99.97
Apply Now
Pay $74.97 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Wet tile saw cuts thick tiles up to a 1-1/4 in. depth
  • Compact and portable wet tile saw with built-in handle
  • Tile wet saw to make straight and angle cuts on all tile sizes
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details

About This Product

Easily make precise cuts with the QEP 700XT 7 in. Wet Tile Saw. The powerful, 3/4 horsepower, 550 Watt motor cuts tiles up to 1-1/4 in. thick. The 7 in. continuous rim diamond blade, table extension, rip guide and angle guide that are included, make this wet tile saw perfect for any cutting job. For porcelain and hard tiles, use QEP's Black Widow Blade, 6-7008BW.

Highlights

  • For cutting ceramic, marble, stone, travertine, and porcelain
  • Built-in handle allows easy transportation
  • Rip and diagonal cuts on any size tile up to 1-1/4 in. thick for more flexibility
  • Always clean the tile saw after each use and store it in a dry location
  • Included 7 in. continuous rim diamond blade, rip guide, angle guide, extension table and blade wrench
  • Powerful 3/4-Peak HP and 3,600 RPM motor
  • Blade guard minimizes water splashing and prevents unwanted objects from coming in contact with the bade
  • Lock-down rip guide for fast 90 degree cuts and angle guides for 22.5 and 45 degree diagonal cuts
  • Deep water tray and water recirculation channel means no refilling
  • 8 in. table extension is included for use on either side of the saw to support large tiles when cutting
  • Non-slip feet for stability
  • Hinged right cutting table can be adjusted for 22.5 and 45 degree miter cuts
  • 6 ft. cord and internal cord compartment for easy storage
  • Return Policy

Product Information

Internet # 305663332

Model # 22700Q

Store SKU # 1003363575

Store SO SKU #1003266361

Specifications

Dimensions

Product Length (in.)7 inProduct Width (in.)21.25 in

Details

Blade MaterialDiamond GritColor FamilyBlack
Cuts ThroughCeramic, Masonry, PorcelainFlooring Product TypeTile Tool
Flooring Tool FeaturesAdjustable blade, Adjustable wheelMaterialSteel
Maximum tile cut size diagonal (in.)24Maximum tile cut size rip (in.)24
Product Weight (lb.)20 lbReturnable90-Day
Tools Product TypePower Tool

Warranty / Certifications

Manufacturer Warranty1 year Limited

Questions & Answers

28Questions
caret
Q:Can you cut pavers?
by|Feb 14, 2024
1 Answer
Answer This Question

A:  This saw will cut pavers but is dependent on the thickness of the paver. The maximum depth of the cut is 1 1/4". Customer Care

by|Feb 21, 2024
    caret
    Q:How do I fill water reservoir?
    by|Jan 8, 2024
    1 Answer
    Answer This Question

    A:  For the 700XT, simply lift up the table and pour the water directly in the reservoir and fill enough just below the little drainage hole on the side of the reservoir. Customer Care

    by|Feb 21, 2024
      caret
      Q:Will this cut garage floor plastic tiles (swisstrax or racedeck) and leave a nice edge? Thank you
      by|Jan 4, 2024
      1 Answer
      Answer This Question

      A:  The 700XT wet tile saw has not been tested for cutting garage floor plastic tiles. Customer Care

      by|Feb 21, 2024
        caret
        Q:Can this cut granite countertops? Can the blade be replaced to use as a polisher?
        by|Oct 24, 2023
        1 Answer
        Answer This Question

        A:  Hello Sarah, the QEP 700XT3/4 HP Wet Tile Saw can be used to cut granite, however, you will want to use our 6-7008BW 7"BLACK WIDOW PORCELAIN BLADE instead of the model# 6-7003Q blade that comes with the tile cutter. The 6-7008BW will easily cut through granite, which is considerably denser than porcelain or ceramic.

        by|Dec 22, 2023
          Showing 1-4 of 28

          Customer Reviews

          3.5 out of 5
          • 3.5 out of 411 reviews
          • 61% recommend this product
          Filter by:
          Showing 1-10 of 411 reviews
          A fine tile saw
          So this tile saw works. Thats all i can really say about it, nothing too amazing. The sliding rip guide is a bit annoying to slide back and forth, also doesnt line up so well. The extending arm is great for longer tiles too. My biggest complaint is replacing the tile blade, they claim its a 7", but i just replaced it with a dewalt 7" blade and it doesnt fit.
          by
            • Recommended
            Blade Guard
            I was concerned when I purchased this cutter as it’s cheap. Well my concerns came to fruition as the blade guard that is connected with two small screws into plastic, one stripped and then the second eventually came loose after two tiles! Now both are stripped and the blade guard no longer can attaches = dangerous open diamond blade spinning, shooting water in your face which will only lead to disaster. This is a dangerous product and HD should not sell it.
            by
              1 found this review helpful
              It was inexpensive and did the job but I wouldn't recommend so a newbe or someone who has never cut and laid tile.
              by
              • Verified Purchase
              Good saw for the price
              It worked very well for this tile job. The only reason I gave it 4 instead of 5 stars is that it bogged down while cutting these very large tiles.
              by
              • Verified Purchase
              Cuts more than the 4in
              Better than the 4in blade model, stays wet. Plastic is more than tough enough for home use. We are using ours for cutting rocks and geodes.
              by
              • Verified Purchase
              1 found this review helpful
              It does a good job once you get the hang of it...
              It’s a $99 wet saw. It does what it’s supposed to do. If you want factory looking edges, get a thick (brick) file and very carefuly file the blade (Do at your own risk). The process resulted in very nice edges. My tile size is 10x40, so It would be nice if the machine was a tad bigger. But the size of my tile has nothing to do with my evaluation of the saw.
              by
                • Recommended
                5 found this review helpful
                For the price this was a great purchase, easy set up, easy use, easy to clean. Common to all tabl...
                For the price this was a great purchase, easy set up, easy use, easy to clean. Common to all table saws the guide arm needs to be tripled checked for lining up on long straight cuts. I used this on a backsplash 6"x3" tiles and it worked like a charm.
                by
                  • Recommended
                  1 found this review helpful
                  No clean cuts, broke multiple tile in half
                  I have used less expensive tile saws and had better quality cuts. I tried multiple tiles and every time it got to the middle of the tile it cracked it half.
                  by
                    2 found this review helpful
                    It worked great! Easy to use
                    It worked great! Easy to use
                    by
                    • Verified Purchase
                    • Recommended
                    It’s...alright
                    I have been in construction for 13 years, and I specialize in tile. I bought this saw for a quick job instead of going to my shop to grab my full size wet saw. 6 cuts on 12” tiles and I was less than impressed. Granted the cuts were around 1/2 inch, it was binding every 6 inches. I think for bigger cuts it may work, however I cannot say.
                    by
                      • Recommended
                      3 found this review helpful
                      Showing 1-10 of 411 reviews

                      Compare Similar Items

                      current item

                      Cuts Through

                      Ceramic, Masonry, Porcelain

                      Ceramic, Porcelain

                      Ceramic, Marble, Porcelain

                      Ceramic, Porcelain

                      Blade Material

                      Diamond Grit

                      Steel

                      Carbide Grit

                      Steel

                      Flooring Tool Features

                      Adjustable blade, Adjustable wheel

                      Adjustable, Non-slip hand grip

                      Handle grip, Non-slip hand grip, Replacement blade

                      Adjustable blade, Adjustable wheel, Non-slip hand grip