#1 Home Improvement Retailer

Internet #202366687

Model #202

Store SKU #645295

Store SO SKU #1000362990

Door Install Kit (10-Pack)

  • For easy, hassle-free installation of doors
  • Accurately install doors in as little as 5 minutes
  • Saves time and money
  • See More Details

Frequently Bought Together


Product Overview

This 10-door value pack contains a unique patented bracket system used for the easy and hassle-free installation of pre-hung interior doors. Using this quick, fail-proof system, doors can be installed accurately in as little as 5-minutes without the hard work of shimming. No Shimming and Zero Nailing Through the door jamb.
  • Each pack contains 60-brackets, which is enough for 10-complete interior rehung door installations, all screws included
  • No shims required, up to 75% faster than traditional methods using shims
  • Easy to use with solid-core or hollow-core interior doors
  • Install doors plumb with a perfect reveal
  • Saves time and money for beginners to pros
  • Patented design allows for door casing/trim to be installed directly over top of brackets, completely concealing them, resulting in a very strong and sturdy, professional door installation
  • (60) steel brackets with plumb alignment notches used to install ten single pre-hung doors
  • (60) 6 in. x 1-5/8 in. stud screws
  • (180) #7 in. x 1/2 in. bracket jamb screws
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.



Individual product length (in.)
Individual product thickness (in.)
Individual Product Width (in.)
Product Depth (in.)
2 in
Product Height (in.)
2 in
Product Width (in.)
2 in


Number in Pack

Warranty / Certifications

Manufacturer Warranty

Questions & Answers


can these be used to hang prehung french closet doors? Or just single doors?

Asked by mb April 18, 2019

I used it for single doors and it works great! Would highly recommend, especially if installing doors by yourself. Not sure it’s designed for French doors.

I would like to hang a new door with the frame attached. Will this work for that?

Asked by Nina January 29, 2019

Yes you can. Very easy to do and quick. Great videos on YouTube as well

Obviously then, one would not want to purchase a prehung door with attached brick moulding?

Asked by Steve March 31, 2017

Will not eork with brick mold attached

How would these be applied to an out swinging door?

Asked by Steve March 28, 2017

On the outside of the door frame. You might need to remove casing if there's casing. I had to do that. You want them where the door is to handle the weight of the door

How much play can be in the rough opening for these to still work? During remodeling I'm running ...

Asked by Duster22 November 9, 2016

At max you can have 3/4 of an inch.

can these be used to install solid core 8' doors?

Asked by jenica November 5, 2016


Hi there, Can you guys ship them to New Zeland? Cheers

Asked by Tony October 17, 2016

Hello Tony! Thank you for your recent inquiry with The Home Depot. We are unable to ship internationally at this time. We are only able to ship to the 48 contiguous states and a limited selection of products can be shipped to Alaska and Hawaii. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!

Is there any need to support the other side of the jamb when installing solid core doors?

Asked by TByrd July 21, 2016

Put them on the inside also, very sturdy

hiw do i hang if foundation problems cause not to be square

Asked by jewels February 18, 2016

The first side of the frame you install (secure to the wall) must be level or Higher then the other side. If needed, put temporary/permanent shim under this side of the frame. Then, you secure it to the wall with the screw. Make sure it is perfectly level vertically. Step #2: Make sure the door reveal is good and latches properly. If needed, put a temporary or permanent shim under the second leg of the frame. When everything is good, screw the second side to the wall. It is much easier then it look

Exterior doors?

Asked by Nona November 29, 2015

All door are installed in the same manner, they should work just fine.

Door Install Kit (10-Pack) - page 2

Customer Reviews

  • 4.7
    out of 260 reviews
  • 95% recommend this product
Filter by:
Showing 1-10 of 260 reviews
30 doors installed including 60" double French style all by...
30 doors installed including 60" double French style all by myself. I have installed doors before, it was so effortless to install. Never fight with shims and balancing a door again to install. These are really great.
The Quick Door Hangers are a practical and fantastic product. I am replacing all doors in my ho...
The Quick Door Hangers are a practical and fantastic product. I am replacing all doors in my home, many on uneven floors. They're sturdy, but for even sturdier installation I took the advice from a Youtuber and used these on both sides (by simply bending the tabs on one side out with pliers to slide the door in the opening and then bending them back with your thumb). The picture below is a exterior door being replaced by an interior door after turning a carport into an addition. I had to add a bit of framing and used pieces of the 60's product particle tar board (I call it brickboard) to compensate depth on the left side. But it was an easy-peasy door installation! And I'm a 54 year old woman do--it-your-selfer.
by Pam
2 people found this helpful
Very good tools.
The hangers are easy to use. I still use a 4 foot level to draw reference marks on both uprights to ensure the door is level. You don't have to use shims, but if replace a hinges screw with larger screw a shim behind the hinge realy helps.
by Ldsgoth
3 people found this helpful
So simple!
My husband and I (handy but inexperienced) installed a house full of doors 12 years ago using shims and it was a nightmare. They never did all latch and swing right, screw holes were a pain to fill, etc. I just finished a house full of doors using these hangers and it was soooo easy. I did it by myself and has absolutely no problems. Even a double door was simple to level and hang. You won't be disappointed.
by Audrey
7 people found this helpful
Extremely Easy to Use
I am hanging 7 doors in my basement and these brackets work like a dream. Very easy to plumb the door and get everything properly aligned. The hardest and most time-consuming part is carefully removing the face molding to install the brackets on a split jamb door. I sat the jambs on a 0.25" thick piece of scrap 2" baseboard to get the proper distance form the concrete slab for flooring and then carefully kicked them out when finished. For the couple of solid core doors I used two extra brackets to better support the added weight of the door. I also replaced the center hinge screw with 2.25" long matching (ORB for me) screws to further strengthen the job due on the solid core doors. A box of these brackets compared to paying $100 or more per door for installation is a no-brainer for me. I was worried about this part of the project due to my inexperience, but they have turned out beautifully.
by MAK71
6 people found this helpful
I hate hanging doors. I bought these knowing I had to hang 5 new doors in just a day...with these clips all I had to do was trim the jamb height and literally in 10 minutes the door was waiting for trim!!
by Jerrylee
6 people found this helpful
It works great. Much easier than shims....
It works great. Much easier than shims.
by Jason
by Luis
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
Made installing doors a much easier task....
Made installing doors a much easier task.
by Panda
Showing 1-10 of 260 reviews