- Non shrink formula makes it ideal for anchoring applications
- For grouting machinery, steel columns and pre-cast concrete
- Can be mixed to a plastic, flowable or fluid consistency
- View More Details
Ask about this product
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Product Details
About This Product
Quikrete 50 lb. Non-Shrink Precision Grout is a high strength, non-metallic, non-shrink grout designed for a variety of grouting and anchoring applications. It can be mixed to a plastic, flowable or fluid consistency based upon what the particular needs are on the jobsite.
Highlights
- Interested in purchasing a pallet, buy 30 bags
- Suitable for grouting pre-cast concrete, steel columns, anchoring applications and heavy equipment
- Used for general construction applications, for precision grouting and for keyway and base plate grouting
- 30-minute set time
- Reaches strengths up to 14,000 psi
- Exceeds ASTM C 1107, R-3, and ASTM C 1107
- Note: product may vary by store
- Wondering how many bags of Concrete Mix to use in order to complete your project? Use the PIP calculator located to the right of the product images to accurately calculate how many bags are needed based on square footage or cubic feet.
- Learn more about concrete and cement here in our Guide
- Return Policy
- California residentssee Prop 65 WARNINGS
Product Information
Additional Resources
Shop All QuikreteSpecifications
Details
Color Family | Gray |
|---|
Warranty / Certifications
Manufacturer Warranty | See packaging. |
|---|
Questions & Answers
Can this be used as a floor leveler?
No, this product cannot be used as a floor leveler. Please use Quikrete Fast Setting Self Leveling Floor Resurfacer. For further assistance please call 1-800-282-5828
How many cubic feet per 50 # bag?
Each 50 lb (22.6 kg) bag will yield 0.45 ft3 (12.7 L) at flowable consistency. For further assistance please call 1-800-282-5828
Can I use this as flagstones grout
No, for flagstone please use Quikrete Sand Topping Mix. The Non Shrink Grout is not meant for an application such as flagstone. For further assistance please call 1-800-282-5828
I poured concrete slab 15x6ft concrete slab for Halo 2 post car lift. Right post is 1 to 2 inches lower than the left. Could I use this product to level out the slab. Lift requires both posts to be at same height otherwise arms wont lift in sync.
The product that we would recommend in this situation would be Sand Topping Mix. It can go from 3/8” to 2.5” and cures to 5000 PSI. For further assistance please call 1-800-282-5828
I need about a 1 inch lift in an existing recessed hole for a flush mount auto lift. The anchors would pass though the product but be fully anchored in existing concrete. Would this product be appropriate?
Can this be used to fill the gap around a Toilet Flange/Drain. The gap is at most 2 inches around the drain pipe and maybe 2 inches deep. Does the pipe need foam tape or can the cement go right up against the pipe?
This product can work in your application and we would recommend putting some type of silicone caulking around the pipe so that there is a slight barrier where if the pipe moves or shakes it will not over time break our product and the flexible silicone will act as an absorber. For further assistance please call 1-800-282-5828
Can I use this for a 36" diameter x 1-1/2" high base pad to support an 80 gallon hot water heater within a day of pouring.
No, this product cannot be used to make pads to hold things. That is not its intended use. Please look into our Fast Setting Concrete Mix or Quikrete 5000. For further assistance please call 1-800-282-5828
Is good for pavers grout ?
No, this is an industrial grout meant for baseplate grouting or other applications where a high strength non-shrink mortar is required. If you are looking for something to sweep into the joints between pavers, we suggest a jointing sand.
Viewing 1-8 of 196
Customer Reviews
4.7 out of 5
