$359.00
Pay $309.00 after $50 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- 27 in. Rip Capacity
- Jobsite ready folding stand provides easy set-up and stability
- Free Parts and Service for Life with Registration
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
RIDGID introduces the R4518 10 in. Table Saw with Folding Stand. Unlike other benchtop tools, the RIDGID 10 in. Table Saw with Folding Stand is eligible for the Industrys Best Lifetime Service Agreement. Simply register this tool within 90 days of purchase to receive FREE Parts, FREE Service, FOR LIFE. The powerful 15 Amp motor delivers 5,000 RPM and features a 27 in. rip capacity for ripping through large sheet goods like plywood and OSB. This RIDGID 10 in. Portable Table Saw features SOFTstart Technology which improves tool life by gradually ramping up the motor for a quiet and smooth startup. The included jobsite ready stand provides easy set-up for more stability. The R4514 includes the 10 in. Table Saw, Folding Stand Assembly and Assembly Hardware, Blade Wrenches, 10 in. Carbide Tipped Blade, Push Stick, Miter Gauge, Rip Fence, Blade Guard Assembly, Anti-Kickback Pawls, and Operators Manual.
- 27 in. rip capacity provides fast and accurate rips into large materials
- SOFTStart Technology motor gradually ramps up the blade speed for quiet and smooth startup
- Steel roll cage frame delivers superior cabinet durability
- Blade brake stops blade in seconds for quicker transitions between cuts
- Jobsite ready folding stand provides easy set-up and stability
- Built-in 2-1/4 in. dust port maintains optimal position for superior dust collection
- On-Board tool and accessory storage conveniently and quickly store accessories
- Lifetime Service Agreement with registration within 90 days of purchase
- Includes: 10 in. Table Saw, Folding Stand Assembly and Assembly Hardware, Blade Wrenches, 10 in. Carbide Tipped Blade, Push Stick, Miter Gauge, Rip Fence, Blade Guard Assembly, Anti-Kickback Pawls, and Operators Manual
- For more RIDGID benchtop tools eligible for the Lifetime Service Agreement, click on the image below
- RIDGID: Build for a Lifetime
- Click Here to Shop All RIDGID Products
- Click here for more information on Electronic Recycling Programs
- Return Policy
- California residents
Specifications
Dimensions: H 13.125 in, W 28.25 in, D 21.5 in
Questions & Answers
186Questions
Q:Can you use a dado blade on this saw
by|Nov 14, 2023
2 Answers
Q:Can you attach a vacuum to the saw?
by|Nov 9, 2023
1 Answer
Q:R4518 In store has plastic table. Ridged people said table is aluminum. Which is it?
by|Oct 19, 2023
1 Answer
Q:Does this model have an extendeble fence? How well does it cut fingers off? (Just kidding.. I think)
by|Oct 18, 2023
1 Answer
Showing 1-4 of 186
5
440
4
115
3
42
2
38
1
34
Jun 29, 2023
Blade will be locked but still slides out of 90 De
Kinda super sad. I got the saw all set at a 90 degree. Made a few cuts and came back with my square and released it was falling back to just about 89 degrees.
Super sad being I need these boards to connect perfectly with no gaps.
by
Response from RIDGIDJul 9, 2023
Hello, Nottrue90 - We're disappointed that you're not receiving accurate cuts! Please email us at Reviews@RIDGIDmail.com. We want to discuss this further, so we can try and move your experience in a better direction.
Jun 15, 2022
Does The Job Well
Bought this as a birthday gift for my brother. He has been very happy with it so far. Cuts well, good power even on 1 to 2 " thick wood, and is compact enough for a smaller workshop or garage.
by
Customer review from homedepot.caMay 22, 2022
Deck not straight.
I purchased this item several days ago, it had all the options I was looking for. I opened the box tried to set it up, as I was measuring to square it up I noticed the deck was not flat. It would be impossible to ever get a square cut with this saw. I returned it, paid the extra money and bought a Dewalt.
by
Customer review from homedepot.caNov 14, 2021
We’ll set up
Got this saw a couple of weeks ago
Set the saw up checked all alignment could not believe was spot on still haven’t figured out how to slant blade but I will
by
Sep 15, 2021
Disappointed. 3 items create inaccurate cuts
Quick Summary:
1) Miter gauge wiggles a lot
2) Rip fence is sticky and hard to make small adjustments + it's not always square/straight. 3) The blade is not 90 degrees out of the box, when I measure with a framing square
Details:
To premise, I am new woodworker and I've been building out my tool set this year. I received this table saw as a gift, so I am happy to own and continue to use it until I can save up for a more expensive/professional table saw. Also, I own other Ridgid tools and have no issues with those (Jigsaw, Drill/Driver, Driver, Shop Vac).
Here is my perspective. This year, I started with some basic tools like a circular saw and miter saw. I built some outdoor furniture with decent outcomes, using mainly glue and screws. Nothing too complex.
For my birthday, my parents bought me this because I wanted to do more intricate work that required dado cuts, ripping boards down and other more advanced techniques that you can't do on miter/circular saws. As I've started doing more wood work on this saw and watching videos/learning more about the woodworking craft, I found this saw does not provide reliable and accurate cuts.
A few things that really hurt this saw, in my opinion.
1) Miter gauge wiggles a lot - this may be a problem on other saws, but it seems like older models of this saw and higher end models of other saws have less plasticky and more reliable miter gauges that don't wiggle in their slot. Sure, it's a small wiggle but an 1/8th of an inch adds up. Gaps in my joints because I was leaning one way or pushing another way while making a cross cut is not ok with me.
2) Rip fence is sticky and hard to make small adjustments + it's not always square/straight. This video at the 2:05 mark is exactly what I see: https://youtu.be/eDBG11ZR3_o?t=125 plus when trying to make small adjustments, one end will stick and be hard to adjust with a small tap or light nudge. This makes measuring out my rip cuts much more tedious.
3) The blade is not 90 degrees out of the box when I measure with a framing square. This is probably the most frustrating because I can't find a great solution to this. The instructions are really hard to understand, IMO, and there are no youtube videos that address this issue. [see picture]
All in all, I've probably spent about 30 hours or so on this saw over the summer and while I don't have much experience, I find these items to be already frustrating and something I know I don't want in the future. Otherwise, the saw works as expected and no other issues that come to mind.
Hope this help
by
Customer review from ridgid.comSep 12, 2021
Disappointed. 3 items create inaccurate cuts
Quick Summary:
1) Miter gauge wiggles a lot
2) Rip fence is sticky and hard to make small adjustments + it's not always square/straight.
3) The blade is not 90 degrees out of the box, when I measure with a framing square
Details:
To premise, I am new woodworker and I've been building out my tool set this year. I received this table saw as a gift, so I am happy to own and continue to use it until I can save up for a more expensive/professional table saw. Also, I own other Ridgid tools and have no issues with those (Jigsaw, Drill/Driver, Driver, Shop Vac).
Here is my perspective. This year, I started with some basic tools like a circular saw and miter saw. I built some outdoor furniture with decent outcomes, using mainly glue and screws. Nothing too complex.
For my birthday, my parents bought me this because I wanted to do more intricate work that required dado cuts, ripping boards down and other more advanced techniques that you can't do on miter/circular saws. As I've started doing more wood work on this saw and watching videos/learning more about the woodworking craft, I found this saw does not provide reliable and accurate cuts.
A few things that really hurt this saw, in my opinion.
1) Miter gauge wiggles a lot - this may be a problem on other saws, but it seems like older models of this saw and higher end models of other saws have less plasticky and more reliable miter gauges that don't wiggle in their slot. Sure, it's a small wiggle but an 1/8th of an inch adds up. Gaps in my joints because I was leaning one way or pushing another way while making a cross cut is not ok with me.
2) Rip fence is sticky and hard to make small adjustments + it's not always square/straight. This video at the 2:05 mark is exactly what I see: https://youtu.be/eDBG11ZR3_o?t=125 plus when trying to make small adjustments, one end will stick and be hard to adjust with a small tap or light nudge. This makes measuring out my rip cuts much more tedious.
3) The blade is not 90 degrees out of the box when I measure with a framing square. This is probably the most frustrating because I can't find a great solution to this. The instructions are really hard to understand, IMO, and there are no youtube videos that address this issue. [see picture]
All in all, I've probably spent about 30 hours or so on this saw over the summer and while I don't have much experience, I find these items to be already frustrating and something I know I don't want in the future. Otherwise, the saw works as expected and no other issues that come to mind. Hope this help
by
May 17, 2021
Worthless
When unboxed, the blade was not square to the miter slot. The provided adjustment does not provide enough travel to bring the back of the blade square. It’s always off an eighth.
by
Customer review from ridgid.comFeb 15, 2021
Solid table table saw.
I've made a few cuts now and I like it. Cuts straight and feels Heavy duty. Definitely would recommend it to friends and family. Deducted a star because the dust shoot doesn't fit a standard shop vac. It would be nice if it came with an attachment to hold the shop vac in place
by
Customer review from homedepot.caFeb 14, 2021
Part broke before use
I just assembled this saw then picked it up to move it and the clip that holds the base to the saw snapped off. Very weak weld. Now I have to drive half an hour to the store, do an exchange, drive home and assemble to new one. This time I will add a couple of pipe clamps to hold the saw to the base.
by
Customer review from homedepot.caAug 31, 2020
Quality for the price
Excellent quality for the price. Needs better mounts for all the attachments when transporting. Would’ve preferred the model with a rolling stand but unavailable at the time
by
Customer review from homedepot.ca0/0
Compare Similar Items
Cordless/Corded | |||
|---|---|---|---|
Corded | Cordless | Corded | Cordless |
Rip Capacity - Right (in.) | |||
26 in | 24.5 in | 30 in | 24.5 in |
Included Accessories | |||
Allen Key/Wrench, Anti-Kickback Prawl, Blade Guard System, Blade(s), Miter Fence, Rip Fence, Stand | Tool Only | Stand | Allen Key/Wrench, Anti-Kickback Prawl, Charger, Stand |
Cuts Through | |||
Wood | Wood | Wood | Wood |
Power Tool Features | |||
No Additional Features | Blade Guard System, Lockout Power Switch | Blade Guard System | Blade Guard System, Lockout Power Switch |
Related Searches
Related Products
The Milwaukee Cordless M18 FUEL 8-1/4 in. Table Saw with ONE-KEY delivers the power of a 15 Amp corded saw with 24-1/2 in. of Rip Capacity and up to 600 lin. ft. of cutting per charge. Designed for the professional carpenter, remodeler and general contractor, the cordless battery powered table saw is optimized for power, portability and productivity. Integrated ONE-KEY Smart Technology enables wireless tool connectivity to smart devices including smart phones and tablets. It easily track and manage a tool's performance and location. The technology is built into the tool, not the battery, for tracking even on an empty charge. Integrated Tool Tracking provides full visibility to how and where tools are being used across your network of jobs and users within a 100 ft. range of your smart device. Integrated Tool Security protects your investments with features like remote tool lock-out or the ability to hide your tools from other smart devices. The POWERSTATE Brushless Motor was purposely built for the M18 FUEL 8-1/4 in. Table Saw with ONE-KEY to provide the power and performance of a 15 Amp corded circular saw.
Maximized for accuracy and capacity this 8-1/4 in. table saw includes on-board storage for blade guard assembly, non-through cut riving knife, anti-kickback pawls, blade change wrenches, miter-Gauge and push stick. The powerful DEWALT 15 Amp, 5800 RPM motor allows users to complete a majority of applications. The rack and pinion fence allow for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods. The DEWALT DW7440RS Rolling Table Saw Stand has a lightweight design, weighing only 33 lbs. The heavy-duty kickstand allows the stand to balance upright for mobility and storage. Folding legs with quick release levers collapse under the stand, minimizing overall size for transport and storage. The retractable soft grip handle allows the user to pull the stand behind them comfortably with the weight of the saw near the ground. The quick connect stand brackets attached to the saw for easy detachment from the stand for loading and unloading. The DW7440RS includes: stand and quick connect stand brackets.
Remember when you had the power of a table saw whenever and wherever you needed it. The WEN 11 Amp 8.25 in. Benchtop Table Saw provides a compact and portable solution for sawing straight, long cuts on larger workpieces. Our spacious table extends out for a rip-cut capacity of up to 25 in., perfect for ripping 4x8 plywood or OSB sheets. The height adjustment wheel easily adjusts the height of the exposed blade anywhere from 0 to 2.75 in. The angle of the blade can also be adjusted for bevel cuts up to 2 in. thick at 45°. The tool-free blade guard can be easily installed or removed as needed, while the extension arm increases the 18.9 in. x 18.4 in. table all the way out to 18.9 in. x 36 in. in size. The compact housing measures in with a footprint of a mere 15.5 in. x 23 in. and includes a side carrying handle for easy transportation and storage between uses. The WEN Benchtop Table Saw also includes an 8.25 in. TCT 24T blade with 5/8 in. arbor, an adjustable rip fence, an auxiliary fence for workpieces less than 1/10 of an inch thick, a miter gauge, a push stick, a dust port adapter, a riving knife to limit kickback and onboard storage for easy organization. And because it's a WEN product, your table saw also comes backed by 2-year warranty, a helpful customer phone line and a stocked inventory of replacement parts. Remember when you had a saw that could really rip. Remember WEN.
The DCS7485B 60-Volt Max 8-1/4 in. table saw is maximized for accuracy, capacity and runtime. The brushless motor delivers the power to cut all common materials. A rack and pinion fence allows for fast, easy adjustments and provides the capacity to rip 4x8 sheet goods. Battery and charger are sold separately.