Extend your vac’s reach to clean gutters.
Gutter cleaning kit contains 5 pieces to make cleaning gutters easy and convenient.
Compatible hoses and wands are 2-1/2 in. in size, larger than both a golf ball and quarter.
Includes a gutter elbow, 2 extension wands, blower nozzle and male-to-male adaptor.
Gutter elbow features a convenient angle for high-reach cleaning.
Included blower nozzle allows for blowing leaves and debris out of your gutters.
Includes two locking extension wands for maximum reach.
Compatible with RIDGID 2-1/2 in. wands and hoses. Compatible hoses must have 2-1/2 in hose cuff.
Handles leaves and other debris trapped in gutters.
Connect to blower port to blast away leaves and debris from gutters.
Blower nozzle concentrates airflow to remove stubborn debris.
Gutter cleaning kit works for both wet and dry debris pickup.
Connecting to existing vacuum wands at home provides enough reach for most single story gutters.
I used a regular filter when I did my gutters with no issues. I did not use a bag, so it was easier to regularly unclog the inner entrance of the vacuum when blocked by leaves.
Yes, I have an older model RIGID and the new attachments fit the old hose no problem. (not sure about the new hose) should be ok.
Hello tompars, Yes, this RIDGID Gutter Cleaning Kit will fit our HD1600 16-gallon NXT wet/dry vac. If you have questions or you need assistance, you may call Customer Service at 1-800-474-3443 from Monday to Friday between 8:00 AM to 5:00 PM Central Time and we'll be glad to assist you. Thanks, RIDGID
no it is part of the kit,sorry
Hello Craig, If the nozzle in question is the blower nozzle, the inside diameter is 0.84". If you have further questions or concerns, you may call our Customer Service at 1-800-474-3443 from Monday through Friday between 8:00 AM to 5:00 PM Central Time and we'll be glad to assist you. Thanks, RIDGID
You need to ask Home Depot that question, mine came with one
I doubt it and besides it usually is better to vacuum out the gutter
This product works great for me! First off, I don't always need the super-skinny attachment - most of my gutters are wide enough to accommodate the curved nozzle without the skinny attachment. Plus, I find that the skinny attachment clogs more frequently. The skinny attachment fits over the narrow end of the curved attachment. You don't need the ~3" long adapter to make it work. (I'm not sure why they include the adapter - I've never used it. Perhaps it can be used to connect two hoses together?) I bought a few other items to go with this setup: -- The 20 foot hose. -- Extra extension wands - I have a total of 6. No more climbing ladders to clean the gutters! I hope this helps.
Hello Jay, Thanks for asking! You could get additional VT2508 extension wands and connect them to the wands included in this kit. One extension wand is 20.25 inches long, but when connected to another wand, it becomes approximately 18 inches because of the overlap. Note that the maximum length of the hose plus the extension wands is 27 feet. You may notice reduction in the suction power if you go longer than 27 feet. If you have further questions, you may call our Customer Service at 1-800-474-344 from Monday through Friday between 8:00 AM to 5:00 PM Central Time and we'd be glad to assist you. Thanks, RIDGID
Hello jk, Each extension wand is approximately 20.25 inches long, but when connected together, it reduces to about an inch. Then, the length of the elbow nozzle prior to the curve part is roughly 8 inches. You could buy additional VT2508 extension wands or get a longer 2-1/2 inch hose such as VT2522 available on this website. Note that with any vacuum, the longer you make a hose, including the extension wands connected to it, the greater the loss in performance. If you need further assistance, you may call us at 1-800-474-3443 or send us an email at firstname.lastname@example.org. Thanks, RIDGID