#1 Home Improvement Retailer

Internet #202269174

Model #JP0610

Store SKU #1003557561

Store SO SKU #1000240639

6 Amp Corded 6-1/8 in. Jointer/Planer

Store
0 in stock
Text to Me
  • Heavy duty induction motor
  • Includes: Steel Cabinet
  • Free Parts and Service for Life with Registration
  • See More Details
$79900

OR
$00
per month* suggested payments with months* financing on this $799 purchase*

Frequently Bought Together

+
+
Price:

Product Overview

RIDGID introduces the 6 Amp Corded 6-1/8 in. Jointer/Planer. Durably made, it features a heavy-duty induction motor that is totally enclosed to help prevent sawdust contamination. Considerably quiet for its 1 HP motor, it makes smooth cuts safely with the assist of a blade guard and push blocks. Its versatile dual bevel fence features stops at 45°, 90°, and 135°. The tool sits atop a rugged, wide-stance cabinet with on-board storage for blade alignment tools and accessories. A long, handy, 45 in. tabletop gives greater support to large pieces. Backed by the Industry Leading Lifetime Service Agreement, the 6 Amp 6-1/8 in. Jointer/Planer includes a steel cabinet and an operator's manual.
  • 6-1/8 in. maximum cutting width
  • 1 HP, 3450 RPM, heavy-duty induction motor operates at 120-Volt or 240-Volt
  • Dimensions: 45.5 in. L x 31.25 in. H x 19 in. D, weighs 208 lbs.
  • Dual bevel fence with stops at 45°, 90°, and 135°
  • Belt drive delivers smooth, consistent power
  • Machine-ground surfaces for precise jointing/planning
  • Easy-to-assemble with a rugged cast-iron base to minimize vibration
  • Rabbeting ledge for precise rabbets up to 1/2 in. deep, adjustable front and rear tables
  • Fan cooled for longer life
  • Convenient 4 in. dust port quickly slides out of the way when not in use
  • Lifetime Service Agreement with registration within 90 days of purchase
  • Includes: (1) JP0610 6-Amp 6-1/8 in. Jointer/Planer with steel cabinet and operator's manual
  • RIDGID: Powerful. Durable. Professional.
  • Click Here to Register Your Product

    Test Item

  • Click here for more information on Electronic Recycling Programs
  • California residents

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Planers

15 Amp 13 in. Portable Thickness Planer
current product
Exclusive6 Amp Corded 6-1/8 in. Jointer/Planer
13 in. 110-Volt/120-Volt 1.5 HP Planer/Moulder
BrandDeltaRIDGIDShop Fox
Name15 Amp 13 in. Portable Thickness Planer6 Amp Corded 6-1/8 in. Jointer/Planer13 in. 110-Volt/120-Volt 1.5 HP Planer/Moulder
Price
$38474
$79900
$145999
Ratings
(165)
(596)
(0)
Maximum Board Thickness.1256.13 in6
PortabilityBenchBenchFloor
Maximum Board Width (In.)13 in6.13 in13 in
Cordless/ CordedCordedCordedCorded
Maximum Speed (rpm)1000034503450
View ProductView ProductView Product

Specifications

Dimensions

Assembled Depth (in.)
55.90 in
Assembled Height (in.)
16.54 in
Assembled Width (in.)
22.44 in
Maximum cut depth (in.)
.125
Product Depth (in.)
19.5 in
Product Height (in.)
31.25 in
Product Width (in.)
45.5 in

Details

Amperage (amps)
6
Bench & Stationary Tool Type
Planer
Color Family
Orange
Color/Finish
Orange
Condition
New
Cordless/ Corded
Corded
Cutterhead Type
Straight Knife
Included
Blade(s)
Maximum Board Thickness
6.13 in
Maximum Board Width (In.)
6.13 in
Maximum Speed (rpm)
3450
Minimum cut depth (in.)
.03125
Number of Cutting Blades
3
Portability
Bench
Power Tool Features
Dust Collection
Product Weight (lb.)
208 lb
Returnable
90-Day
Tools Product Type
Power Tool
Voltage (volts)
120

Warranty / Certifications

Certifications and Listings
UL Listed
Manufacturer Warranty
3 Year. Lifetime Service agreement with tool registration

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.7
    out of 599 reviews
  • 96% recommend this product
Filter by:
Showing 1-10 of 599 reviews
Very solid
Tables are very accurate for this price point. Coplaner within .002”. Solid fence mechanism stays square and locked. All of the above are the Achilles heel of budget/benchtop jointers and RIDGID really excels here. It’s over 200 pounds - definitely want to add casters. Solid build and strong 1 HP motor. Want it for half off? Wait for the periodic sale for a couple hundred off. Then open a credit card offering $200 credit if you spend $500 in the first 90 days (there are several).
by Andy
Best Jointer ever!
My husband loves this machine so much he compared his love for me to his love for this jointer!lol
by Wife of a woodworker
Best budget jointer
Assembly took about 2 hours with one person but I would recommend having a second person as some of these pieces are extremely heavy. After assembly, squaring of the fence was easy enough using a youtube video. after squaring it worked flawless. adjustment screws on the fence allows for quick adjustments between 90 degrees, 45 and 10 degrees. So far I've used pine material with no issues. edges are square as they should be. For such a large piece of equipment it is fairly quiet until your material goes into it. Cutting adjustments are a breeze with the adjustment knob. I will be adding a mobile base as this thing is heavy and can be out of balance after moving a lot. This is a must for small woodshops and entry level businesses alike.
by dbennett459
1 person found this helpful
It's a great Jointer! I bought this from Home Depot in December 2020. I have a Rigid table saw an...
It's a great Jointer! I bought this from Home Depot in December 2020. I have a Rigid table saw and I am very happy with it so when I went to buy a Jointer I went with the Rigid and I'm so glad I did. The directions were very easy to follow. It took me about 2 hours to set up. It is heavy and I have a small shop so I ended up installing the Bora Universal mobile base kit on it. I would recommend doing this if you have to move it around.
by Mike
1 person found this helpful
I have been using Ridgid power tools for nearly 25 years. My entire shop is equipped with Ridgid ...
I have been using Ridgid power tools for nearly 25 years. My entire shop is equipped with Ridgid tools. This planer / jointer is a pro quality tool that will do the job for many years to come. The warranty is second to none.
by ilovewood
1 person found this helpful
Nice machine, it’s made in Taiwan, I've had it for just about a month. Assembly went well. A word...
Nice machine, it’s made in Taiwan, I've had it for just about a month. Assembly went well. A word of caution, review the instructions before removing the cast iron from the box, as they advise setting the in-feed / out-feed casting, on 4 X 4’s; there is a standing roll pin that acts as a stop for the rotating safety guard, so don’t set it down on a flat surface as this roll pin could get damaged. You'll also want a fuller compliment of tools than their suggested list, i.e. sockets, long extensions etc. Once I had it assembled I flipped on the switch and it came right on, curiously I came back a little later and flipped on the switch and it didn’t move, I got a electrical hum as the motor was stuck. Checking the motor turned freely by hand, to resolve the problem I had to adjust the belt tension (loosen) and then got it going – I let it run for several minutes, no problems since. Out of the box I had no problems with flatness or parallelism of the in-feed to out-feed, and once the fence was set to 90, checking with a Brown & Sharp Square it repeats to 90, my test piece was nice and square. You do want a good dust collector, mine is rated at 750 cfm. For the money the jointer it’s a 5 star machine.
by 2ndCorinthians5Seventeen
8 people found this helpful
This jointer was easy to assemble and easy to use. Found it easier to assemble by assembling the ...
This jointer was easy to assemble and easy to use. Found it easier to assemble by assembling the base then installing the top but other than that I would recommend to anyone needing or looking for a midsize plainer
by Willpower
2 people found this helpful
Easy assembly and mirror smooth cuts! I bought this jointer in part based on the May 2020 Wood m...
Easy assembly and mirror smooth cuts! I bought this jointer in part based on the May 2020 Wood magazine review, where it was ranked as a very good performer and the top value. The assembly instructions were clear and well written, pictures were helpful, parts clearly identified, and everything was packed securely. I put the whole thing together by myself in a little more than an hour. Having another person would have been helpful at a couple of points, but obviously not essential. Once assembled, it is very sturdy. It needed a very minor and easy adjustment to the 90 degree stop on the fence, but the tables were perfect out of the box. I've run just a few boards through it so far, but it made quick work on some very dense 2" by 6" burr oak. The boards were rough cut and some were a bit warped and twisted. A few passes over the jointer and the sides and faces really are mirror smooth. Even the 6 inch face of this tough wood did not bog the motor down at all. I put together a 6 inch PVC dust collector fitting to hook up to my dust collector system. It easily mounts using the threaded mounts on the jointer, and grabs all the shavings. Even though I haven't had it long or used it much, I think this is a great tool at a great price.
by LRM2
4 people found this helpful
I bought this based on the overall positive review. I've used mine about 6 times so far and out ...
I bought this based on the overall positive review. I've used mine about 6 times so far and out of the box this is a beast. Both in feed and outfeed came aligned correctly from the factory and the fence gets aligned by you. I took my time and mine perfect within. 001" you literally have to spend twice as much to get anything close to this. The unit is heavy and does a good job. If you are using bug heavy slabs I suggest anchors to the floor.
by CarpenterDad
1 person found this helpful
This is my first jointer and so far, I love it. I just got it a few days ago and have edge jointe...
This is my first jointer and so far, I love it. I just got it a few days ago and have edge jointed quite a few boards already. In the last 5 months or so I have begun to get serious about woodworking. Before getting this jointer I was edge jointing boards on my table saw using a jig I made. It worked pretty well but if the board was longer than four feet or so it was quite cumbersome. Using this jointer is so much easier, although I'm sure longer boards would still be difficult, but a lot easier than on the tablesaw. Today I edge jointed the boards for the lower cabinet of a gun cabinet I am making. When I was finished the jointed edges basically disappeared when I put them together for a test fit. That's the way it should be and so much easier than using a jig with a tablesaw, and undoubtedly a bit more accurate. I considered buying a bench top model but I reconsidered because they are too lightweight, short in length, and would be cumbersome for any board longer than 30 inches or so. My thought was, that if any tool in my shop could benefit from being a little bigger and a lot heavier, a jointer would be that tool. So I pulled the trigger on this rather than a baby bench top model and I am so glad I did. It didn't hurt that it was on sale for $100 off either. At full price it would have been harder to talk myself into it. Assembly is a piece of cake for a big strong young buck, but I am almost 63 years old with two bad knees who is just trying to not catch the Coronavirus so I was afraid to even have my neighbor help out. But I am stubborn and persistent, and I was able to do it myself by taking all the pieces out of the box except for the table itself, going slow and thinking my way through it. Quality seems to be quite good, maybe not what you would expect from a $5000 industrial model, but for $599 I am not complaining. Out of all my other stationary power tools, with none of them being bargain basement quality, but not high end, Festool type quality either, this tool has by far the most solid and precise feel to it. I would definitely buy this again and highly recommend it.
by Ken
11 people found this helpful
Showing 1-10 of 599 reviews