#1 Home Improvement Retailer

Internet # 100144842

Model # 2057-1

Store SKU # 566620

Store SO SKU # 1001605294

1 Gal. (4 qt.) Vinyl Composition Tile Floor Adhesive

$19.73
  • Superior grade vinyl composition tile adhesive with great grab
  • Can be used to install vinyl composition and vinyl asphalt tile
  • Environmentally safe tile adhesive with 24 hours dry time
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
caret
Product Details
  • Superior grade vinyl composition tile adhesive with great grab
  • Can be used to install vinyl composition and vinyl asphalt tile
  • Environmentally safe tile adhesive with 24 hours dry time
About This Product

ROBERTS 2057 Vinyl Composition Tile (VCT) Adhesive is a clear, solvent-free, water-based, thin-spread tile adhesive that provides excellent grab and high residual tack. This superior grade tile adhesive brushes, rolls or trowels on and helps hold tiles firmly in place, even when subjected to repeated cleaning and mopping. When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes.

  • For adhering vinyl composition tile (excluding self-stick), including tile-over-tile installation
  • Bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo
  • Ideal for direct bond and double bond installation
  • Moisture Control Adhesive - up to 8 lbs. MVER and 85% RH
  • Thin-spread adhesive dries clear in up to 24 hours with the restriction of foot traffic and moving heavy objects
  • Approximately 160 to 180 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 3/32 in. U-notch trowel and 170 to 190 sq. ft. per gallon coverage when applied with a 1/16 in. x 1/16 in. x 1/16 in. square-notch trowel
  • Enviro-friendly, solvent-free and LEED compliant; VOC < 1 g/L, SCAQMD Rule 1168
  • Protected by GoldGuard, an antimicrobial protection system that inhibits the growth of mold, mildew and odor causing bacteria in both wet and dry adhesives
  • CRI Green Label Plus Certified - GLP no. 3647
  • 15 year moisture control, 15 year direct bond, 7 year double bond limited warranty
  • Do not expose freshly applied adhesive to water for 4 days or to standing water for 4 weeks
  • Return Policy
Product ID #: 100144842Internet #: 075378205715Model #: 2057-1
caret

Specifications

Dimensions

Container size (qt.)4Maximum Coverage Area (sq. ft.)180 sq ft
Product Width (in.)7.75 in

Details

Adhesive TypeVinylColor FamilyBeige
Commercial / ResidentialCommercial / ResidentialDry time (hours)24
Flooring Material FeaturesLatex based, Solvent freeFlooring Product TypeVinyl Adhesive
Flooring TypeVinylIndoor/OutdoorIndoor
LocationFloorProduct Weight (lb.)7.9 lb
Returnable90-Day

Warranty / Certifications

Lifetime WarrantyNoManufacturer WarrantyTo be free from manufacturing defects
caret

Questions & Answers

217Questions
caret
Q:Can this be used on ceramic tile
by|Feb 19, 2024
0 Answer
Answer This Question
caret
Q:What can I use to glue down rubber tiles?
by|Feb 16, 2024
1 Answer
Answer This Question

A:  Roberts 1550 urethane adhesive is effective for installing rubber mats/tiles and rubber acoustic underlayment systems, as well as rubber sports flooring in environmentally controlled spaces. Substrate : concrete or plywood Always follow the floor covering manufacturer's specific install guidelines.

by|Feb 20, 2024
    caret
    Q:Can this be used on OSB sub flooring
    by|Feb 9, 2024
    1 Answer
    Answer This Question

    A:  Recommended Substrates: Concrete, APA rated plywood, one layer of well bonded, existing VCT (free of wax/finish), a primed gypcrete (refer to ASTM F2419) and terrazzo. All substrate material must be flooring rated

    by|Feb 14, 2024
      caret
      Q:Can it be used to apply vinyl flooring to the wall
      by|Feb 9, 2024
      1 Answer
      Answer This Question

      A:  No. Roberts doesn't offer an adhesive for Vertical application of Vinyl Flooring.

      by|Feb 14, 2024
        Showing 1-4 of 217
        caret

        Customer Reviews

        4.1 out of 5
        • 4.1 out of 839 reviews
        • 74% recommend this product
        Filter by:
        Showing 1-10 of 839 reviews
        We bought this glue to use for putting down vinyl flooring. It was super easy to use, we used a paint brush to put in the backs of flooring then stuck it to the floor. It dried really fast. A little goes a long way. Definitely recommend.
        by
        • Verified Purchase
        3 found this review helpful
        Works Great - minimal mess
        This is the second adhesive I tried. The first was runny and messy - it worked but it glued down everything - my skin, my clothes! This one is much better - more of a paste -like texture. I was using peel and stick vinyl tiles on cement (basement) and wanted more "stick-um" than just the peel and stick! Re-habbiing my craft/laundry room- Also used this with the stair carpet treds - even though they were also peel and stick!
        by
          4 found this review helpful
          2057 floor glue
          Works great on vinyl plank flooring
          by
          • Verified Purchase
          1 found this review helpful
          it did not hold down my tile...
          it did not hold down my tile
          by
          • Verified Purchase
          1 found this review helpful
          Good thick paste
          I used this paste to install my vinyl floors. It is very sticky and thick, it can be hard to maneuver it you don’t get enough paste at a time or until you get the hang of it. My floors are still strong, it’s going on 2 years.
          by
            • Recommended
            3 found this review helpful
            I don't like the stickiness of it.... it was supposed...
            I don't like the stickiness of it.... it was supposed to be a clear dry adhesive for the tiles. Instead it by the Yello ruins the white marble tile that I bought can you replace this?
            by
              4 found this review helpful
              Horrible product
              I have laid my share of VCT tile over the years and have always used a 3/16 x 5/32 trowel to lay out my adhesive. I don't know if I simply got a bad batch but this product TOOK FOREVER to set up to a point where I could work with it. After waiting over 100 mins (YES 100 MINUTES) after laying it out I was still unable to lay my product without the tiles sliding around. I even had direct air current flowing over the work area and it was the middle of the summer so it wasn't cold outside. Very frustrating to be forced to wait 3-4 hours before you can begin to lay out your product. While my trowel is slightly larger then what is recommended I laid out the adhesive very thin and to no avail. Adhesive like this typical develops a skin after setting for a hour and at that point you can start laying your material. Make sure and plan a entire day for your job when using this adhesive since you'll be waiting half the day for this stuff to cure up to become workable.
              by
              Response from The ManufacturerAug 2, 2021
              Roberts understands installing a new VCT floor can be challenging. Here are some key product usage points regarding the 2057 this thin spread VCT adhesive product that may improve performance and satisfaction. The largest trowel size recommended for use during installation is a 1/16" square notch (over porous substrate). A smaller notched trowel is recommended over non porous substrates. Ensure adhesive trowel ridges are well defined. When excessive adhesive is used, longer than usual open time should be expected. Always allow the adhesive to dry to a full tack (no transfer to fingertip) and a transparent color prior to installing the tiles. Once flooring is installed, roll the flooring with a weighted roller in both directions to secure the tiles into the adhesive field. - Customer Care QEP
                3 found this review helpful
                Rating provided by a verified purchaser...
                Rating provided by a verified purchaser
                by
                • Verified Purchase
                I simply loved using this pre mixed grout. It was...
                I simply loved using this pre mixed grout. It was so easy to apply and made my work as a first time DIY tile installer, look very professional. It closed in the gaps that I thought I would have to move toilets or cabinets to achieved. Very pleased with it.
                by
                • Verified Purchase
                1 found this review helpful
                Sticks well! Both the tile and my fingers stuck well together. Less is more on this product so ...
                Sticks well! Both the tile and my fingers stuck well together. Less is more on this product so as you push down you wont have to clean excess from the seam lines which will get sticky fingers. Tile is holding well as it should.
                by
                • Verified Purchase
                • Recommended
                4 found this review helpful
                Showing 1-10 of 839 reviews

                Compare Similar Items

                current item

                Maximum Coverage Area (sq. ft.)

                180 sq ft

                20

                190 sq ft

                300 sq ft

                Flooring Material Features

                Latex based, Solvent free

                Solvent free

                Latex based, Solvent free

                Antimicrobial, Moisture resistant, Solvent free

                Location

                Floor

                Floor

                Floor

                Floor