Hi Dee, Thanks for your interest in the RYOBI 5 in. Backer Pad for Orbital Sanders A21BP01. This backer pad will work with sanders that require a 5 inch backer pad. Thanks for asking! - Eve
two things to check out: 1) has the pad 3 or 4 screw holes ...and your polisher has it the matching set of holding/attaching holes. Older units had 3 screw holes, newer ones 4 holes. 2) the pads use a velcor system to holding the sand paper to the pads. How does your polisher work..with a velcor holding system ? All these things need to match one with the other so they fit.
Hi Jimmy, Thanks for your interest in the RYOBI Brand. I apologize that we don't have that specification available for the RYOBI A21BP01 5 in. Backer Pad for Orbital Sanders, however you may call us directly for a technician to gather that information. We can be reached at 1-800-525-2579 and follow the prompts for technical service. Eve
Hello WoodworkerDude, thanks for your question on the RYOBI A21BP01 5 in. Backer Pad for Orbital Sanders fits all 5 in. RYOBI Random Orbit Sanders. If you have an issue after purchasing and installing the pad, please reach out to our Ryobi Cutomer Care team for assistance. They can be reached at 1-800-525-2579. - Eve
I believe you need a different pad for Stickfast. The pads screw on with either 3 or 4 screws. 3 for the older units and 4 holes for the newer units.
No, not without some modification. The screw holes align (though the holes on this pad are quite a bit larger in diameter) but there are no small holes for the four plastic alignment pins that are spaced between the holes on the sander.
Hi Josh, Please double check the model we do not have a model S102 sander. Thanks for your question. Greg
Very important, 5" pads and either it is a 3 or a 4 screw hole pads, which is yours ! 3 or 4 screws ?
If it has 4 screws, probably.