#1 Home Improvement Retailer

Internet # 312127045

Model # P593

Store SKU # 1005061020

ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only)

$99.00
Apply Now
Pay $74.00 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Cuts PVC up to 2 in. thick
  • 300 cuts per charge*
  • Over 280 ONE+ Products – All Work With Any RYOBI ONE+ 18V Battery
  • View More Details
Store
0 in stock
caret

Product Details

RYOBI introduces the 18V ONE+ Lithium-Ion Cordless PVC and PEX Cutter (Tool Only). The 2 in. stainless steel blade allows clean cuts from 1/4 in. to 2 in. thick in plastic tubing. This blade is also replaceable for continued performance. Featuring a quick blade release and a tool-free, one button blade change, this tool provides users with maximum efficiency. Power is no problem when pairing this ONE+ PVC and PEX Cutter with a ONE+ 2.0 Ah Battery (not included), providing 300 cuts on a single charge. Best of all, it's a part of the RYOBI ONE+ System of over 280 Cordless Products that all work on the same battery platform. Backed by the RYOBI 3-Year Manufacturer's Warranty, the 18V ONE+ Lithium-Ion Cordless PVC and PEX Cutter includes an operator's manual. Battery and charger sold separately.
  • Cuts up to 2 in. PVC
  • 300 cuts on a single battery charge using a P190 RYOBI 18V ONE+ 2.0 Ah Battery (battery not included)
  • Replaces cumbersome manual cutters providing user convenience
  • Stainless steel blade for quick, clean, burr-free cuts
  • Quick blade release for increased productivity
  • Tool free, one button blade change
  • Open/Close trigger for easy operation
  • LED light to illuminate cutting surface
  • For replacement blades, please refer to model A184PCR1, the RYOBI PVC Cutter Replacement Blade (not included)
  • Part of the RYOBI 18V ONE+ System of Over 280 Cordless Products
  • 3-year manufacturer's warranty
  • Includes: (1) P593 18V ONE+ PVC and PEX Cutter and an operators manual
  • Battery and charger sold separately






  • Click here for more information on Electronic Recycling Programs
  • Return Policy
  • California residents

Additional Resources

From the Manufacturer

caret

Specifications

caret

Questions & Answers

28Questions
caret
Q:Could this be used to trim bamboo? I?m serious.
by|Apr 4, 2023
1 Answer
Answer This Question

A:  Hello, Tank - Thank you for your question. This tool is only for the following applications; Cutting PEX, rubber hoses, and non metallic conduits. Cutting PVC and CPVC pipes. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only). - Jewel

by|Apr 6, 2023
    caret
    Q:Any safety on there? Hate to lose a finger?
    by|Apr 3, 2023
    2 Answers
    Answer This Question

    A:  Hello, Chris - Thank you for your question. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed in the manual may result in electric shock, fire and/or serious injury. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only). - Jewel

    by|Apr 6, 2023

      A:  This tool could absolutely chop off a finger without breaking a sweat. You would have to do it on purpose. The cutter moves fairly slowly so you would really have to try to hurt yourself. 

      by|Apr 5, 2023
        caret
        Q:Mine cuts crooked. It's a smooth cut but angles to the right every time. The blade feels loose. Is everyone's like this or did I get a dud?
        by|Nov 27, 2022
        3 Answers
        Answer This Question

        A:  Mine cuts straight, sounds like your blade is not properly seated.

        by|Feb 17, 2023
          7 found this answer helpful

          A:  Hello, Flaguy - Thank you for your question. I apologize for that inconvenience. I would recommend taking the tool to an authorized service center. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only). - Jewel

          by|Feb 17, 2023
            8 found this answer helpful

            A:  If your blade feel loose get another cutter. Mines cut great. Have not had any problems. I had mines for 6 months now.

            by|Feb 17, 2023
              6 found this answer helpful
              caret
              Q:Will this work on electrical pvc conduit?
              by|Nov 26, 2022
              1 Answer
              Answer This Question

              A:  Hello, D6ix - Thank you for your question. This tool can be used for the following applications; Cutting PEX, rubber hoses, and non metallic conduits. Cutting PVC and CPVC pipes. I hope this helps! Additionally, if you need further support, then a RYOBI Customer Experience Professional is here for you, Monday - Friday from 9 am to 6 pm (EST) when you call or text us at 1.800.525.2579 or through email or live chat when you visit us at https://www.ryobitools.com/support/contact. And thank you again for your interest in the ONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only). - Jewel

              by|Feb 17, 2023
                5 found this answer helpful
                Showing 1-4 of 28
                caret

                Customer Reviews

                4.5 out of 5
                (210)
                • 4.5
                  out of 210 reviews
                • 83% recommend this product
                Filter by:
                Showing 1-10 of 210 reviews
                Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpos...
                Pure Garbage! If you need to make a quick cut for a diy project in which the pipe serves a purpose other than to carry water your golden. If your intention is to use this to make a straight cut you are better off using a jagged rock! I went through 5 feet of 2" PVC to try and get a straight cut and did not get close, I even sharpened the blade. At the end I noticed the blade has too much play to be able to do anything straight.
                by
                  5 found this review helpful
                  Doesn't cut straight
                  Have been looking for a good PVC cutting tool and came across this one. Looked sturdy and I already have the Ryobi 18V battery. I made the purchase at the store today and came home to do a few test cuts. I tried about 6 cuts on 1-1/2" Schedule 40 PVC and it just can't make a straight cut. It's off by 1/4" on every cut. 1/2" pvc not so bad. Ryobi, is this a defective unit or has it just not been field tested? VERY disappointed.
                  by
                    9 found this review helpful
                    We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the batte...
                    We cut a lot of PVC pipe on our ranch, so this tool came in handy. It did not come with the battery or charger, which are different from other Ryobi batteries and chargers, so we had to wait until we could get that to try it out. (2 weeks due to COVID-19 affecting delivery). It is easy to operate. Note the pictures on the insert, which shows this more clearly. It has an easy-release button so it doesn't stick. It cuts fast and clean.
                    by
                    • Recommended
                    Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smalle...
                    Let's start with the one draw back I had, it's a bit large for some of those undercabinet, smaller spaces. Now from there nothing but Great !, cut out my old sprinkler valve plumbing in nothing flat, as was cutting all the sections to plumb all the elbow and tees for the new valves. What a time saver. Now we cut only Schedule 40 PVC Pipe 3/4 inch. Also cut a piece of 1 1/4 inch no problem and standard PVC 3/4 which seam to flexible and in one case broke before it cut. Features are, the trigger operates the blade both ways and there's a quick release on the side that opens the blade manually. The safety trigger guard takes a few to get the hang of, but one thing for sure if you even a bit-release your grip it stops. This is great. LED light to illuminate cutting surface, 3-year manufacturer's warranty. Includes: (1) P593 18-Volt ONE+ PVC and PEX Cutter and an operator’s manual --TOOL ONLY--
                    by
                    • Recommended
                    This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back ...
                    This is only the tool but we had a Ryobi base already, however, it wasn't the right one, so back to Home Depot to get the base which was expensive but worth it. Putting in piping at a friend's cabin and this was excellent. Cuts through the larger PVC and the Pex without damaging, especially without crushing even the smaller PVC piping. Would have given this 5 stars but concerned about the plastic casing not being as durable as other cordless tools.
                    by
                    • Recommended
                    Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much P...
                    Ryobi 18V cordless PVC/Pex cutter is a great option for my hydroponic setup. Cutting that much PVC for supply lines and drains with mechanical cutter would be very hard on my arthritic hands. I mistakenly thought one of my older compact Ryobi batteries would work with this cutter but find I must use the One+ 18V batteries. So I've ordered a new 2.5 Ah battery and charger. So I wasn't able to operate the tool for review, but can say the tool itself if substantial. It has a heft of weight to it and is substantial in build. I'd caution on the combined weight of the tool and larger battery. The design of the cutting end should hold the PVC securely and provide a straight cut. And the size of the blade and cutting area is easily large enough to accommodate a full 2 inch piece of material. The blade easily releases to open position and can be manually closed with a large green button. Instructions are helpful and clear. I'm happy more and more unique hand tools are being added to Ryobi's One+ system.
                    by
                    • Recommended
                    1 found this review helpful
                    The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I u...
                    The Ryobi PVC/PEX cutter has been a great addition to my shop. Practical and straightforward, I use it to cut up to a 2-inch pipe. I have used it to cut washers out of PVC and pipe for my dust collection. It is over 5lbs with a battery, so not light, but this is not something I would be carrying around. It is built well, quiet, and has an all-metal jaw upfront. The only thing I wish they would have done differently is the LED. The LED is on or off. There is no light switch and the handle like there other tools, so the LED only operates when pulling the trigger, and the cutter is moving. This makes it pretty useless if I am trying to line it up for a cut in low light situations. I could hold the trigger to open the jaw, and the light would stay on, but the blade makes a popping sound, and it does not seem good for the tool. Pros: Easy to use. The blade is changeable. The jaw has a quick open feature. Easy to use safety switch. Solid metal jaw. Excellent and clean cuts. Cons: the LED can only be activated when the jaw is moving. No belt hook or rafter hook. Not even an option to add one. The packaging is a little off-putting. Well worth it, if you cut a lot of PVC or PEX, this makes the job very easy. I leave my hacksaw or manual cutters in the drawer now.
                    by
                    • Recommended
                    If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC p...
                    If you have ever cut PVC pipe, you can now get rid of your old hand cutters with this power PVC pipe cutter. Unless you get an extra large hand cutter, most of the hand cutters only cut up to 1-1/2" pipe or smaller. This Ryobi power cutter cuts up to 2" pipe. When using a ratchet hand cutter the cut usually ends up at an angle and not very square. This cutter squares the cuts much more precisely than the hand cutters. The speed at which it cuts is much faster than I would have imagined. A 1-1/4" pipe cut takes about 1 to 2 seconds if that. I have made about 50 cuts so far and the batter still shows 3/4 charge. The blade seems to remain just as sharp as the first cut and if it ever needs sharpening or replacement, it pops out very easily with a one button release. I have the beginning of arthritis in my right hand and this has and will save me a lot of time, effort and pain with projects cutting PVC. If you have any projects or jobs with a lot of cuts this is well worth getting.
                    by
                    • Recommended
                    These PVC and PEX cutter by Ryobi works really well. The cutter feels solid and robust in my hand...
                    These PVC and PEX cutter by Ryobi works really well. The cutter feels solid and robust in my hand and weighs about 3 1/2 pounds without the battery. Add a 4Ah battery and the weight increases to about 5 1/4 pounds. The included instructions were pretty easy to follow and ready to start cutting. I did not have any PEX tubing but tried the cutter on various sizes of PVC ranging from 1/2 inch up to 1 1/2 inch schedule 40 and the cutter worked flawlessly. The cutter can handle up to 2 inch PVC so should work for most all plumbing projects around the house and garden. Had to be careful and take my time to get a clean even cut but that's true with any PVC cutter. Some features I like were the quick release button allowing the blade to open up without the use of the motor as well as the LED light to help illuminate the working area if the light is dim. There is a quick release button for the stainless steel blade making blade changes simple and fast. It would have been nice if Ryobi included an extra blade, time will tell how long the included blade remains sharp. The cutter is part of the Ryobi 18V One+ family so if you already have Ryobi One+ tools the batteries will be interchangeable, which is one of the major benefits. Also, make sure to always wear safety glasses when using the cutter as I had a piece of PVC shatter while cutting and shards went all over the place.
                    by
                    • Recommended
                    The new Ryobi 18-Volt one+ Pex and PVC Shear Cutter for is designed to help users cut up pipe fro...
                    The new Ryobi 18-Volt one+ Pex and PVC Shear Cutter for is designed to help users cut up pipe from 1/4inch up to 2inches in Diameter with ease over the use of a manual shear cutter. It is also part of the full 125 cordless tool system that Ryobi has put together that all use the same battery platform . So you only have one battery for all tools and one type of charger. Each tool comes with a 3 year Manufactures Warranty . This is a tool only purchase , Battery and charger are sold separately. See the vid below for a demo of the product in real life from my you tube channel .
                    by
                    • Recommended
                    Showing 1-10 of 210 reviews

                    Compare Similar Pipe & Tube Cutters

                    current product
                    ExclusiveONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only)
                    2-3/8 in. Ratcheting Pipe CutterExclusiveONE+ 18V Cordless PVC and PEX Cutter with Hybrid LED Project Light (Tools Only)New2-3/8 in. and 1-5/8 in. Ratcheting PVC and Tubing Cutter
                    BrandRYOBIMilwaukeeRYOBIMilwaukee
                    NameONE+ 18V Lithium-Ion Cordless PVC and PEX Cutter (Tool Only)2-3/8 in. Ratcheting Pipe CutterONE+ 18V Cordless PVC and PEX Cutter with Hybrid LED Project Light (Tools Only)2-3/8 in. and 1-5/8 in. Ratcheting PVC and Tubing Cutter
                    Price
                    $9900
                    $10400
                    $15072
                    $15900
                    Ratings
                    (209)
                    (95)
                    (687)
                    (89)
                    Compatible Pipe MaterialPVCPVCPVCPVC
                    Pipe Cutter TypeElectricRatchetingElectricRatcheting
                    Power TypeBatteryManualBatteryManual
                    THD SO SKU 1002634363
                    View ProductView ProductView ProductView Product