$6.97
- Compatible with most RYOBI ONE+ HP Tools
- Easily attaches to tool with included screw
- Sturdy, all metal design adds durability
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
The RYOBI Premium Belt Clip Attachment is compatible with most RYOBI ONE+ HP Tools. This belt clip easily attaches with the provided screw for a pain free installation. This clip transforms your tool, to provide easy portability throughout any job or project.
- Easily attaches to tool with included screw for convenience
- All metal design adds durability
- Compatible with: PSBRA02- 18V ONE+ HP Compact Brushless 3/8 in. Right Angle Drill, PSBDD01- 18V ONE+ HP Compact Brushless 1/2 in. Drill/Driver, PSBIW01- 18V ONE+ HP Compact Brushless 4-Mode 3/8 in. Impact Wrench, PSBID01- 18V ONE+ HP Compact Brushless 1/4 in. Impact Driver
- Includes: (1) Premium Belt Clip Attachment
- Return Policy
- California residents
Specifications
Dimensions: H 1 in, W .9 in, L 2 in
Questions & Answers
24Questions
Q:Why don't the drills come with this essential (in their words "optional") drill bit holder? A: Because the sales department knows you'll NEED it and will pay for it.
by|May 27, 2023
1 Answer
Q:Why don't your tools come with a belt clip?
by|May 24, 2023
1 Answer
Q:Will these clips fit on the p321 nailer?
by|Mar 31, 2023
1 Answer
Q:Will this fit the FVL52 flip light?
by|Mar 20, 2023
1 Answer
Showing 1-4 of 24
5
80
4
23
3
11
2
5
1
24
Dec 28, 2022
Nice little clip
Great clip. Be sure to check your tool for the connection point. Some models have one, older models don't.
by
Oct 20, 2022
Hold a spare bit
Mounts on left or right side. Great to store a flat head for when you need it. Expensive for what it is!
by
Jul 10, 2021
nice but
Love the clip but it shoild have been free with the tool what s disapointment that why i only gave it 3⭐️
by
Jul 10, 2021
good but ...
Its a well need addition but it should have came with the drill that the only reason i didnt give it 5⭐️
by
Nov 11, 2020
It did what it suppose to do for my new HP drivers (drill/impact)
It did what it suppose to do for my new HP drivers (drill/impact)
by
Oct 27, 2020
Here we have a RYOBI Bit Holder Attachment For HP Drills And Drivers. Please note, this is only ...
Here we have a RYOBI Bit Holder Attachment For HP Drills And Drivers. Please note, this is only compatible with certain RYOBI tools. Please see below for a list of compatible tools.
EXCLUSIVELY compatible with:
PSBRA02- 18V ONE+ HP Compact Brushless 3/8” Right Angle Drill
PSBDD01- 18V ONE+ HP Compact Brushless ½” Drill/Driver
PSBIW01- 18V ONE+ HP Compact Brushless 4-Mode 3/8” Impact Wrench
PSBID01- 18V ONE+ HP Compact Brushless ¼” Impact Driver
So it appears that this is only compatible with certain BRUSHLESS RYOBI tools as shown above.
This is definitely worth having for the above tools.
by
Oct 25, 2020
I typically carry a cereal bowl around to organize the different bits I use during a Saturday hom...
I typically carry a cereal bowl around to organize the different bits I use during a Saturday home project. This morning's task was installing an over-the-range/undermount microwave oven. The microwave the builder installed died and I was able to buy at Home Depot what I thought was a direct replacement for about the same cost as a visit by a repairman. The old GE model # had been discontinued, and this was the closest replacement, but it was 1/4" taller. This meant breaking out the tools. Where's my cereal bowl?
I love my Ryobi tools with the One+ system Lithium Ion batteries. I've actually given away or thrown out 5 old style NiCad battery cordless screwdrivers since I got the Ryobi Lithium Ions. I had to give this Ryobi extra bit holder/clip a try to see if it would replace my cereal bowl full of bits. First thing I noticed is that one of the older tools didn't have the needed screw hole location. See the photos. Also I noticed the recess on the back of the clip doesn't match the trapezoidal shape of the boss with the screw hole. Just as well, this way you can orient it any way you want without having to match the boss.
It sticks out, but is definitely easier to clip/unclip a bit than the "built-in" bit holder molded into the front of the tools. There are enough screw holes to sport four of these if so desired.
by
Nov 10, 2023
Older models came with a clip on the front.
As many have said, this should have come with the drill/driver. AND, it only holds ONE bit. For the price there are many alternatives that will hold several bits. look elsewhere.
by
Response from RIDGIDNov 10, 2023
Hello, Fastelder - Thank you for your review! We value your opinion and strive to introduce products that our customers find innovative and affordable. Our team of developers is always creating exciting and new products as well as improving existing products through feedback such as yours. And if you want to share more, then please contact us anytime at Reviews@RIDGIDmail.com.
Sep 27, 2023
by
Aug 30, 2023
The older drivers and some drills had bit holders or magnetic plates, but the new ones do not. I bought 2 of these bit holders for each side of my newer driver and they work very well. They should be available in stores.
by
0/0