#1 Home Improvement Retailer

Internet # 300664926

Model # 16942

Store SKU # 1002226529

Cobra+ 0.27 Caliber Semi-Automatic Powder Actuated Tool with Silencer

$24210
Apply Now
Pay $217.10 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Silencer reduces noise by 30% for better work environment
  • Power adjust drives pins flush
  • Rubber cushion on grip means greater user comfort
  • View More Details
Store
0 in stock
caret

Product Details

The Ramset Cobra+ 0.27 Caliber Semi-Automatic Powder-Actuated Tool can tackle professional remodeling projects, such as attaching wood to concrete or steel. It lets you set the load strength to match the job. The adjustable power level increases speed and efficiency and reduces power up to two levels. The silencer feature reduces actuation noise, and the ergonomic grip provides comfort for long jobs.
  • Use for attaching 2 x 4s, furring strips and electrical boxes to concrete and steel
  • New silencer feature reduces jobsite noise
  • Adjustable load strength for optimum penetration into base material
  • Ergonomic grip and padded handle design enhance user comfort and absorb recoil
  • Includes reusable storage case, safety glasses, spall guard, wire cleaning brushes, and common replacement parts (barrel retention clip and piston)
  • Fires 10 shot strip loads, 1 strip of loads drives 10 pins (up to 3 in.)
  • Requires Powder Actuated Tool Licensing - Click Here To Apply
  • Requires Powder Actuated Tool Licensing -Click Here To Apply
  • Return Policy
caret

Specifications

caret

Questions & Answers

33Questions
caret
Q:Do you have to have the nails with the ramset to use it or can you use it with just the powder shot
by|Feb 6, 2023
1 Answer
Answer This Question

A:  Hi Chris, you must use Ramset Drive Pins when firing the tool. Powder Actuated Tools are not to be dry fired without a drive pin. Please make sure to follow all instructions in the user manual and contact our Customer Experience team at (877) 489-2726 if you have any additional questions.

by|Feb 13, 2023
    caret
    Q:Can be used safety to build a soffit? I see ppl used it just in the floor.
    by|Jan 14, 2023
    1 Answer
    Answer This Question

    A:  Hi Natalia, Ramset Powder Actuated Tools are used for anchoring to concrete and steel. Please be sure to read through the operators manual before using the tool. If you are unsure if Ramset may be suitable for your application, please consult your local buildings codes, inspector, or reach out to our customer service team at (877) 489-2726. Thanks!

    by|Jan 25, 2023
      caret
      Q:What is the maximum thickness of steel will the 27 caliper will attach to?
      by|Jan 11, 2023
      1 Answer
      Answer This Question

      A:  Hi Christopher, there is no specific maximum steel thickness for our Ramset Cobra+ Powder Actuated Tool. To determine if the material you are anchoring to is suitable, please conduct a test fastening and follow all instructions in the operator’s manual. For more specific application questions, please contact our Customer Experience team at (877) 489-2726

      by|Feb 23, 2023
        caret
        Q:How many nails can it hold at a time
        by|Nov 13, 2022
        1 Answer
        Answer This Question

        A:  The Cobra+ is a semi-automatic tool that holds one (1) pin and one (1) strip of ten (10) 0.27 caliber powder loads.

        by|Nov 15, 2022
          Showing 1-4 of 33
          caret

          Customer Reviews

          4.3 out of 5
          (148)
          • 4.3
            out of 148 reviews
          • 85% recommend this product
          Filter by:
          Showing 1-10 of 148 reviews
          Wanted to hang a banner on a store. Used the lowest powder charge i could find. Disintegrated bri...
          Wanted to hang a banner on a store. Used the lowest powder charge i could find. Disintegrated brick, had to eventually drill with masonry bit to install anchors. But still like the gun. Tim Allen style more power the better.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          Love the silencer, over the one I had rented. Also appreciate the variable depth setting, which ...
          Love the silencer, over the one I had rented. Also appreciate the variable depth setting, which when combined with different colored shells give a much wider variety of strike pressure. Needed the .27 caliber for my hard concrete floor! Definitely worth the price over renting and the per nail/shell price they charge...even for one project!
          by
          • Verified Purchase
          • Recommended
          I tried several DeWalt drivers but they were hard to operate and the last one fell apart. It was a lot more expensive but the Ramset gun fired every time. I am very happy with it Snd would highly recommend it. Charley
          by
          • Verified Purchase
          The old ‘shotgun’ still the best way to connect certain things to concrete. With all the battery and gas powered options, I didn’t think I’d still need one. This gun if much improved from the Ramset guns of old…it is about 50% silenced and has a power selector to change strength, every contractor needs one in the van!
          by
            by
              The gun jambs every other time
              by
                by
                  This tool is great. This is the 4th one we...
                  This tool is great. This is the 4th one we have purchased for commercial HVAC install.
                  by
                  • Verified Purchase
                  I am extremely disappointed with this Ramset Cobra+ 0.27 caliber...
                  I am extremely disappointed with this Ramset Cobra+ 0.27 caliber tool. This is perhaps the worst tool I have ever owned. While attaching the bottom plate of a long wall this Ramset started misfiring and not shooting the nails down completely as it had done properly at the beginning of the wall. Nails bent back under the wall and chipped out the concrete floor, a problem that wasn't evident until it had shot more than a dozen nails incorrectly. The entire wall had to be removed by cutting the heads off these nails half driven by the Ramset. The wall had to pried up and the mess of chipped up concrete had to be fixed then the wall reattached to the concrete by another method. I would never purchase ANY Ramset product again.
                  by
                  • Verified Purchase
                  by
                  • Verified Purchase
                  Showing 1-10 of 148 reviews

                  Compare Similar Powder Actuated Tools

                  current product
                  Best SellerCobra+ 0.27 Caliber Semi-Automatic Powder Actuated Tool with Silencer
                  DX 2 Powder-Actuated Fastening ToolDX 2 Powder-Actuated Tool with Steel / Concrete Fasteners and Boosters
                  BrandRamsetHiltiHilti
                  NameCobra+ 0.27 Caliber Semi-Automatic Powder Actuated Tool with SilencerDX 2 Powder-Actuated Fastening ToolDX 2 Powder-Actuated Tool with Steel / Concrete Fasteners and Boosters
                  Price
                  $26900
                  $32900
                  $44900
                  /package
                  Ratings
                  (147)
                  (71)
                  (2)
                  Power Tool FeaturesCushioned GripNo Additional FeaturesNo Additional Features
                  View ProductView ProductView Product