Install stock roller shades without tools in seconds, using Simple Slide No Tools Roller Shade Brackets by Redi Shade. Peel and stick the brackets to the inside of your window frame, then securely and permanently slide in your stock roller shade. An easy level template is included to assist with placing the brackets level in the window. Removal is just as simple without the damage of traditional brackets and screws. Command Strips from 3M included.
2 brackets in a pack for mounting one roller shade
For use with Inside Mount Roller Shades
No Tools installation install stock roller shades securely and permanently in seconds without any tools or additional hardware
Three steps to install peel the liner, stick the brackets inside the window frame and slide in the roller shade
One step removal - pulldown to remove without the damage of traditional brackets and screws
Optional easy level template included to assist in level shade installation
100% Satisfaction Guarantee we stand behind our products. If you arent happy with your shades let us know so we can make things right
A: I was quite concerned as the roller blinds I was going to install were quite heavy being almost 7 feet wide and 5 feet in depth but they have held now without any issues for over a year now. Just make sure that the surfaces are clean and free of any imperfections before using.
by|Feb 20, 2021
1 found this answer helpful
A: They hold the normal weight of a roller shade.
by|Feb 20, 2021
A: Hello HD6313, thank you for the great question, our Simple Slide Roller Shade Brackets can hold up to 30lbs when installed and hold up to an 80” wide store stock roller shade with the flat and round pin design. Please let us know if we can help with anything else. Redi Shade Customer Care
by|Feb 20, 2021
2 found this answer helpful
Q:can you use this in a 72 or 73 in roller?
by|Nov 10, 2020
2 Answers
Answer This Question
A: Yes, "can hold a shade up to 30lbs, at a maximum width of 80" is stated specs.
by|Nov 11, 2020
A: Hi HD6313, thank you for the great question. Our Simple Slide Roller Shade Brackets can hold up to an 80” wide store stock roller shade with the flat and round pin design. Redi Shade Customer Care
by|Nov 11, 2020
1 found this answer helpful
Q:Are these universal brackets for other roller shades or just the Redi Shade brand?
by|Sep 10, 2020
2 Answers
Answer This Question
A: Hi there, our Roller shade brackets are meant for all flat and round pin roller shades designs with a maximum weight of 30 pounds.
Redi Shade Customer Support.
by|Aug 19, 2023
3 found this answer helpful
A: Universal. Shades with a pin on one end and a tab on the other fit fine. And have lasted over a year without a single issue.
by|Aug 19, 2023
4 found this answer helpful
Q:My window is 72"W and i want to use this mount do i have to shorten shade to use this
by|Jul 21, 2020
2 Answers
Answer This Question
A: You will be fine using these brackets. Your shades are 72" and the max width for these is 80". As long you realize that your shades weigh 30 LBS or less then your all good to go.
David
by|Nov 11, 2020
1 found this answer helpful
A: Hi Marge, thank you for the great question! Our Simple Slide Roller Shade Brackets can hold a shade up to 30lbs, at a maximum width of 80”, with the flat and round pin design. Your 72" shade should work just fine with the brackets as long as it is under 30lbs. Please let us know if we can help with any other questions. Redi Shade Customer Care
by|Nov 11, 2020
1 found this answer helpful
Showing 1-4 of 5
Customer Reviews
4.3 out of 5
(53)
4.3
out of 53 reviews
95% recommend this product
5
33
4
12
3
1
2
3
1
4
Filter by:
Showing 1-10 of 53 reviews
Jan 14, 2020
The bracket on the side with the flat pin sags...
The bracket on the side with the flat pin sags and the top portion of adhesive doesn’t stay adhered to the wall. This happened to me on multiple windows. The bracket on the side with the round stays fully adhered. I prepared the surface per the instructions with alcohol.
by
Verified Purchase
Dec 17, 2019
These shade brackets are made of plastic, have a removable table which reveals a sticky pad which...
These shade brackets are made of plastic, have a removable table which reveals a sticky pad which makes it stick to the wood in the window frame. The "sticky pad" on it is strong, really grips to the wood. These brackets are super easy and fast to install. No tools are needed other than possibly a level and measuring tape, if you choose to use these. The best part is there is no need to make holes in the wood of your window frame. I had my home built almost 35 years ago, and I wish I'd had something like this back then as I have since changed from shades to blinds in many rooms, but not all. I have the holes in the wood where the shades were before. They can be filled with wood filler, but I didn't bother, should I ever tire of blinds, want to revert back to shades. In a new addition, I have added shades instead of blinds as it is just what I wanted for these rooms; I chose the shades for their room blackening feature.
I LOVE the idea that these plastic brackets are again: 1) easy to install; 2) don't require a drill or tools to install; 3) makes it EASY for ANYONE to install a shade; 4) no holes in the wood. The thing about holes in your window frame is that once they are made, they are there forever... so if you ever revert to a window treatment that exposes more of the window you may expose the holes in the wood frame made way back when. Another great feature about these shade brackets is that they are very flexible, can easily be placed near where the vertical and horizontal part of the window frame meet. Nailing the metal type shade brackets is hard to do in this very limited space area. This product is a no hassle, pain free solution to installing a shade, makes it VERY EASY for anyone to install a new shade.. My only regret about this product is that I wish I'd found it sooner. I think you will love it!
REDI SHADE SIMPLE SLIDE NO TOOLS INSIDE MOUNT ROLLER SHADE BRACKET 2-PACK is a simple solution fo...
REDI SHADE SIMPLE SLIDE NO TOOLS INSIDE MOUNT ROLLER SHADE BRACKET 2-PACK is a simple solution for roller shade. It comes with is a 3M double side tape for installation. It is very easy to apply and install. This will be a very quick installation for roller shade. It seems like double sided tape is non-damaging tape for the wall and/or paint (not for sure). Since this is double tape installation, you might want to be careful about hard pull. Overall, this is simple yet quick solution.
This is a very easy to install peel-and-stick set of mounting brackets for pull-down roller shade...
This is a very easy to install peel-and-stick set of mounting brackets for pull-down roller shades. I had to install a set of pull-down shades on a door that had full panel glass and the occupant of the office wanted them for privacy. With the regular shade brackets I would be required to screw them into the side trim of the window but with these, I just peeled the paper off the back of the adhesive strip and stuck them up. These made the job very quick and easy.
At first I thought that these " REDI SHADE SIMPLE SLIDE NO TOOLS INSIDE MOUNT ROLLER SHADE BRACKE...
At first I thought that these " REDI SHADE SIMPLE SLIDE NO TOOLS INSIDE MOUNT ROLLER SHADE BRACKET " were going to be cheap, not hold and would break after the first 10-pulls, but surprisingly they are tough little holders. Everything you need to accurately install these are included, like the command type backing to secure to wall and a nice easy template to measure the distance off the window frame to you can be consistent.
I hate having to use screws to mount hardware for shades so I was interested in a no tools produc...
I hate having to use screws to mount hardware for shades so I was interested in a no tools product that would do the job. I was very impressed with the instructions and the included template for accurate installation of the brackets. Since the brackets use tape for attachment, there are no holes and one can remove them easily by using pulling on the tab at the bottom. Plus they look better than the old metal brackets with screws.
Count me an initial skeptic that has been turned into an avowed fan. These little gadgets are as ...
Count me an initial skeptic that has been turned into an avowed fan. These little gadgets are as easy to apply as promised and they do hold an even wider shade than anticipated. I wanted to make sure the brackets would stay on so I initially cleaned the surfaces thoroughly and then just proceeded to stick them on using the provided template for proper placement, voila, that is all that was necessary. I am thoroughly impressed!
This is an easy to use/install 3M/command-like sticker product and that alone makes it worth it. ...
This is an easy to use/install 3M/command-like sticker product and that alone makes it worth it. Being able to put something up without damaging where it’s being installed is great. This was even more true for me because my use is semi temporary while I save to get new windows for our house. (You’ll note the old blind hardware I haven’t decided to remove or not in the pics.)
That said there are things that can be improved.
1) I loved that it came with a self leveling tool. The curve in the tool does not actually fit the curve of the product; it doesn’t make it idiot proof for me. While I was reaching over my head balanced on a ladder reaching over my sink, this tool became rather ineffective. Even with tape holding it in place. I think a different cut out, in the shape of the product would have been better.
2) The 3M/command type sticker on the back is wonderful for removal. But not so great if you need to reposition because I managed to not get it level with the tool. It would be better to give us extra stickers in order to do a redo if needed like other similar products have.
3) Once the holder and the sticker is in place, you will be able to easily see it. If this cream tool matches the wall you’re putting it on, it will hide it. If not, you’ll want something to cover it.
Overall, I like this product, the ease of use, and would purchase this anytime I would want to install a roller blind. I would just use another method to ensure it is level and in the proper spot before peeling and sticking it in place.
Simple yes. But I wonder how long it would hold. I mean eventually the glue will wear off right...
Simple yes. But I wonder how long it would hold. I mean eventually the glue will wear off right? This is a for roller shade so it is pulled on and that stress will eventually wear down glue. So far it's worked perfectly and I just needed the cut out. No tools are necessary to install the roller shade bracket. Comes in white so it will blend in with the white walls.
REDI Shade is a simple inside mount for roller shade brackets. It is really a simple idea and ve...
REDI Shade is a simple inside mount for roller shade brackets. It is really a simple idea and very economic. As you can see from the pictures there are two stick on holders in the package. Use the template in the package to find the right position on the inside wall for your size roller shade. Peel the back off the holder and stick in the right position. Do the same on the other side. Insert the round pin of your roller into the circular hole. Then slide the flat pin into the other bracket. You are now done.
If you need to remove, slide the roller out flat side first. Then pry the holder off the wall. There will be no damage that a little cleaning cannot remove.