
Return this item within 90 days of purchase.
Get an answer now with AI
Magic Apron Assistant is an AI virtual assistant. By proceeding, you consent to the recording and use of your information by The Home Depot (and authorized third parties). More information
Introducing the new 100 Amp Rover MPPT Charge Controller, the largest Rover controller that Renogy has to offer. Capable of supporting up to 1300-Watt on 12-Volt, 2600-Watt on 24-Volt, 3900-Watt on 36-Volt and 5200-Watt on 48-Volt. This off-grid controller was designed for large-scale projects, both mobile and stationary. For even more power, users can utilize a unique feature limited to this Rover and connect two 100 Amp Rover controllers in parallel for a total of 200 Amp. This smart charge controller can also conveniently self-diagnose itself in the event of an error and can be remotely controlled through the Renogy DC Home app using the Renogy BT-1 Bluetooth Module. By pairing the Rover with the BT-1 and the Renogy DC Home app through Bluetooth, users can easily monitor and adjust their solar system straight from their phones.
Dimensions: H 17.44 in, W 4.35 in, D 12 in
Product Depth (in.) | 12 in |
|---|---|
Product Height (in.) | 17.44 in |
Product Width (in.) | 4.35 in |
Amperage (A) | 100 A |
|---|---|
Features | Indoor/Outdoor, Portable |
Included | No Additional Items Included |
Returnable | 90-Day |
Voltage (v) | 48 v |
Wattage (W) | 5200 W |
Manufacturer Warranty | 3-year material and workmanship warranty |
|---|
Hi Royaltek, Thank you for sending your inquiry. Yes, the Rover 100 is compatible with BT-2 as well. You can give us a call at (909) 287-7100. We're open Monday through Friday from 8:30 am to 3 pm PST.
Hi Buggsbunny, No, you cannot connect the Rover 100 and the Rover 40 together. The rover 100 can only be connected to another Rover 100. To be exact, the Rover 40 charge controller can handle up to 520W of solar panel to charge a 12v battery bank.
Hi Daniel, Depending on the battery type, the charge controller either goes to float (meaning that it will trickle charge the batteries to keep it at 100%. this is normally the case for lead-acid batteries) or it will stop charging the batteries once its full, in most cases its the Lithium type batteries.
Hi Mark, For you to be able to use 4x 320W panels that has 1900W your battery system will have to be at 24v. Which means you can have 2x 12v 200Ah in connected in series. Staying at 12v battery will limit you to have 1300W max for your PV array.
Hello, Thank you for sending your inquiry. To answer your question in general yes they can work together and be connected to this charge controller to charge the battery bank. It's just a matter of wiring the panels together in series or parallel or both (series-parallel). If the panels are not the same wattage, it is a good idea to go with a parallel connection. If you are considering connecting the panels together in parallel, you may need a couple of branch connectors to connect the positives and negative poles together. However, we would like to gather more information on what type of panels do you currently have so we can ensure that we were able to provide proper recommendations in setting up your system. Should you have any questions, please contact us at 909-287-7111, Monday through Friday 8:30 am - 3:00 pm PDT, and refer to your ticket number below. Please expect long wait times as we also are migrating to a new phone system. Again, thank you for your patience.
Hey Darline, I do apologize that we could not meet your timeline, please contact is the future if you need any orders expedited and we can assist, have a wonderful day.
Thank you for the question! We have not tested our charge controller with any other input other than solar. Thank you, M.S.
Hello, The Sku of the Renogy 100-amp Rover charge controller is at follows RNG-CTRL-RVR100-BC. Please contact us if you have any other questions or concerns, have a wonderful day.
Viewing 1-8 of 8
4.5 out of 5