#1 Home Improvement Retailer

Internet # 308723210

Model # RNG-CTRL-RVR100

Store SKU # 1004124724

Questions and Answers for Renogy Rover Li 48-Volt 100 Amp MPPT Solar Charge Controller Auto LED Display

  • Automatically detects 12V/24V/36V/48V DC system voltages
  • Compatible with various deep cycle battery options
  • 4-stage MPPT charging: bulk, boost, float and equalization

Questions & Answers

I see it is compatible with the BT-1 Bluetooth wireless via the re-232 port, but the unit also has rs-485 ports so can't it also work with the BT-2?
ByJul 4, 2023
1 Answer | 
Answer This Question

Hi Royaltek, Thank you for sending your inquiry. Yes, the Rover 100 is compatible with BT-2 as well. You can give us a call at (909) 287-7100. We're open Monday through Friday from 8:30 am to 3 pm PST.

By|Jul 4, 2023


    I already have your Rover 40amp cc. I have ordered the Rover 100amp cc. The 100amp states that you can add another cc to it. Will the 40amp and the 100amp can be hooked up together. Just to verify also the 40amp cc can handle only 4x100w 12v panels pv?
    ByJun 21, 2022
    1 Answer | 
    Answer This Question

    Hi Buggsbunny, No, you cannot connect the Rover 100 and the Rover 40 together. The rover 100 can only be connected to another Rover 100. To be exact, the Rover 40 charge controller can handle up to 520W of solar panel to charge a 12v battery bank.

    By|Jun 21, 2022


      Does this charge controller stop charging the batteries when they are full,or does it keep charging it
      ByNov 27, 2021
      1 Answer | 
      Answer This Question

      Hi Daniel, Depending on the battery type, the charge controller either goes to float (meaning that it will trickle charge the batteries to keep it at 100%. this is normally the case for lead-acid batteries) or it will stop charging the batteries once its full, in most cases its the Lithium type batteries.

      By|Nov 29, 2021


        I want to use this Rover controller for your 4 panel 320watt set advertised on Home Depot. If I use your 12volt 200 ah battery, the controller specs say it will only do 1300w for 12v system. The 4 panels will put out around 1900w. How will this work?
        ByOct 23, 2021
        1 Answer | 
        Answer This Question

        Hi Mark, For you to be able to use 4x 320W panels that has 1900W your battery system will have to be at 24v. Which means you can have 2x 12v 200Ah in connected in series. Staying at 12v battery will limit you to have 1300W max for your PV array.

        By|Oct 25, 2021


          I have multiple panels, some are portable, some are mounted. My question, can this or any other controller handle input from two or more different solar panels placed in different locations and be able collect the power from both and combine them to charge a battery bank. Currently, from what I understand, if you have multiple panel banks and controllers, trying to charge the same battery bank, the one that is seeing the most power being developed will charge the battery's and the other system will think the batteries are fully charged and stop charging. How do I get them to work together.
          ByDec 23, 2020
          1 Answer | 
          Answer This Question

          Hello, Thank you for sending your inquiry. To answer your question in general yes they can work together and be connected to this charge controller to charge the battery bank. It's just a matter of wiring the panels together in series or parallel or both (series-parallel). If the panels are not the same wattage, it is a good idea to go with a parallel connection. If you are considering connecting the panels together in parallel, you may need a couple of branch connectors to connect the positives and negative poles together. However, we would like to gather more information on what type of panels do you currently have so we can ensure that we were able to provide proper recommendations in setting up your system. Should you have any questions, please contact us at 909-287-7111, Monday through Friday 8:30 am - 3:00 pm PDT, and refer to your ticket number below. Please expect long wait times as we also are migrating to a new phone system. Again, thank you for your patience.

          By|Dec 23, 2020


            I want to buy this product but I do need a 2 day delivery. Is it possible to get it by Tuesday June 30?
            ByJun 28, 2020
            1 Answer | 
            Answer This Question

            Hey Darline, I do apologize that we could not meet your timeline, please contact is the future if you need any orders expedited and we can assist, have a wonderful day.

            By|Jul 2, 2020


              Can this handle input from a wind turbine?
              ByApr 13, 2020
              1 Answer | 
              Answer This Question

              Thank you for the question! We have not tested our charge controller with any other input other than solar. Thank you, M.S.

              By|Apr 22, 2020


                What is the model number of the 100 amp unit?
                ByJul 13, 2019
                1 Answer | 
                Answer This Question

                Hello, The Sku of the Renogy 100-amp Rover charge controller is at follows RNG-CTRL-RVR100-BC. Please contact us if you have any other questions or concerns, have a wonderful day.

                By|Jul 15, 2019