
Return this item within 90 days of purchase.
Get an answer now with AI
AI-generated from the text of manufacturer documentation. To verify or get additional information, please contact The Home Depot customer service.
Having hot water whenever your family needs it shouldn't be a luxury. Put worrying about hot water out of your mind, because now your family can enjoy an endless supply of hot water. And you can enjoy it anywhere in your home. 2 showers running at once, Not a problem. Laundry and dishes at the same time, Great idea. Thanks to our innovative technology, your family's comfort and convenience come first.


Dimensions: H 21.8 in, W 14 in, D 7.9 in
Product Depth (in.) | 7.9 in |
|---|---|
Product Height (in.) | 21.8 in |
Product Width (in.) | 14 in |
Water Connection Size (in.) | 3/4 in |
Application Type | Residential |
|---|---|
BTU Rating | 120000 |
Efficiency Level | High |
First Hour of Delivery (gallons/hr) | 0 |
Flow Rate @ 35°F Rise (gallons/min) | 5.3 gal (US)/min |
Flow Rate @ 45° Rise (gallons/min) | 4.4 gal (US)/min |
Gas Connection Size | 3/4 in |
Gas Type | Propane |
Indoor/Outdoor | Outdoor |
Maximum Flow Rate (gallons per minute) | 5.3 |
Number of Showers | 1-2 |
Product Weight (lb.) | 29.7 lb |
Required Volt Connection | 120 volt |
Returnable | 90-Day |
Total BTU (Btu) | 120000 Btu |
Uniform Energy Factor | 0.81 |
Water Heater Features | Freeze Protection, Wall Mounted |
Water Heater Type | Gas |
Certifications and Listings | CSA Certified |
|---|---|
Part Warranty | 5 Year |
Hello AnaRP, Thank you for your quesiton. The V53De is a non-condensing unit, so it does not produce condensate during normal operation and therefore does not require or include a condensate drain line.
Hello Mark, The V53De does not have a pilot light. It is equipped with an ignition device which automatically lights the burner.
Hello Robt, The V53DeN has required installation clearances around the unit itself, as well as separate clearance requirements for the exhaust termination in relation to doors, windows, and other openings. Clearances for the unit and vent termination must be installed in accordance with the installation manual and local code requirements. Because window clearance requirements can vary depending on the installation layout and vent location, we recommend consulting a licensed installer to confirm the proper placement for your specific application.
Hello Maria, The V53DeN is not designed to plug into a standard outlet. It requires 120 VAC, 60 Hz power from a properly grounded circuit, and a dedicated disconnect switch must be provided for the incoming power. The disconnect should be rated for outdoor use. We recommend working with a licensed installer to ensure the unit is wired correctly and in compliance with local electrical codes.
Hello Ohdub, The V53De is designed to be wall-mounted using the provided mounting brackets and can be installed on combustible or non-combustible surfaces, provided the installation meets the required clearances and the mounting surface is capable of supporting the unit. We recommend consulting a licensed installer to ensure the unit is securely mounted and installed in accordance with manufacturer requirements and local codes.
Hello Rinsing, The V53De does not turn on based on outdoor temperature and will only operate when there is a demand for hot water. It does include built-in freeze protection, which activates in cold conditions to help protect the internal components of the unit. However, this protection does not extend to external piping or components, which should be properly insulated or protected from freezing. We recommend consulting a licensed installer to ensure the unit is properly installed and protected for your specific climate and application.
Hello Jaemack, This unit does not include a controller, but one can be purchased separately. The compatible controller for this unit is the MC-91-2W.
Hello Stanley, We do not recommend installing the unit under a sink. The unit requires specific installation clearances and uses room air for combustion, so it must be installed in a location that provides adequate airflow. In addition, combustion air must be free of corrosive compounds commonly found in products such as aerosol sprays, detergents, bleach, and cleaning solvents. The unit must also be properly vented to the outdoors in accordance with the installation and operation manual and all applicable local codes. We recommend contacting a licensed installer to evaluate your hot water needs and determine the most appropriate unit and installation method for your application while ensuring all installation requirements and local codes are followed.
Viewing 1-8 of 154
4.4 out of 5