Universal Fit Pivotrim Autowinder Replacement Bump Feed Head for Gas and Select Cordless String Grass Trimmer/Lawn Edger
$2697
Pay $1.97 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Fits most gas and some electric trimmers
- The lines pivot to prevent breakage
- Load line without opening the head
- View More Details
Product Details
Specifications
Questions & Answers
46Questions
Q:Will this head fit on a STIHL FS-131-Z Brush Cutter?
by|Mar 14, 2023
1 Answer
Q:Will this head adapt to a Shindaiwa T230X trimmer with a square drive?
by|Feb 9, 2023
1 Answer
Q:Will it fit a homelite straight shaft.
by|Nov 4, 2022
1 Answer
Q:Well it fit a Green works 60 volt
by|Nov 3, 2022
1 Answer
Showing 1-4 of 46
Mar 2, 2022
Awesome- tough- large
Rino-Tuff - Rino-Tuff Universal Fit Pivotrim Autowinder Replacement Bump Feed Head for Gas and Select Cordless String Grass Trimmer/Lawn Edger actually fit both my electric and gas trimmers. They fit my older model and the new model- I really appreciate the the universal fit is actually universal. It comes well packaged- has the necessary adapter equipment in the package. It was an easy exchange process.
by
Feb 27, 2022
Easiest loading trimmer head ever!
I love this trimmer head. It is super easy to load. You simply measure out about 16 feet of string, feed it through to the halfway point and twist the head to wind it in. Done! Takes about 3 minutes start to finish. It is also super east to feed the string, simply tap the head on the ground to feed out about 2 inches of line. The head is easily installed on most trimmers, just screw it on.
by
Feb 26, 2022
Makes trimming easier.
This is a handy replacement for a standard trimmer head. It is very easy to install and has all the necessary components to match most standard trimmers. It is very easy to load and the included string has a great cut. It took me a few tries to get used to the process of getting more trim but really you just need one good push of the button and the line will extend automatically.
by
Feb 21, 2022
Good upgrade from manual string loading.
This auto winder string attachment is a good idea and works well if it's compatible. I have two trimmer. A gas powered Homelight (it fit that one) and a cordless Ryobi 40v Expand-It. This does not fit the Ryobi which is the one I use 95% of the time. I like that this comes with lots of adapters and hardware for attaching to lots of different models. Just be aware that unless your exact model is listed on the small print on the back of the packaging, that it will not fit your machine. Loading the string onto the head is a simple process and very similar to other autoloaders on the market. Overall, this is a good option if you are tired of living with a manual loading string trimmer head and are getting tired of dealing with it (and this fits your machine).
by
Response from WeedWarriorProductExpertFeb 22, 2022
Hello Roadrunner, anytime we hear problems encountered with one of our products, we want to get involved and resolve the difficulties the best we can. Product quality and customer service is always our top priority! Please contact us at 1-866-212-7466.
Feb 18, 2022
It is a good product, but not for all.
As the title says, this Pivotrim Autowinder Replacement Bump Feed Head is for Gas and only Select Cordless String Grass Trimmer/Lawn Edger., which means that this may not be a filt for everyone.
The installation manual is included, but the UR code on the manual is better. I have included a picture of the UR code, and if you scan it with your smart phone, you can see a video which is very helpful.
The bump feed head is made of durable materials and the price is good.
As said, the auto winding of the spool and the bump feed works well.
by
Feb 18, 2022
Works on Craftsman V60
I own 12 Acres of land and use Weedwhackers to clear things that trip me (e.g. Black Raspberries, Wild Roses) or stick to my Dog (anything with burrs). I always use the thickest line the bump mechanism can handle. I have a barn full of Power Tools, because every time something stops working, I buy a new one (must have 20 Chainsaws). I have a few Weedwhackers, and all of them have something wrong with them ... three of them the bump mechanism is broken (they release string without 'bumping'). My apprehension with Universal Parts, they tend to be 'Master of None', but I figured having a few brands, this should work well on at least one. I watched the video on Installation (via QR Code on packaging). I installed it on one of my Craftsman V60's. Perfect fit, with one metal washer and #2 Long Nut. It comes preloaded with string, but you have to remove it and reinstall. The longest part was figuring out how to remove the old Head (e.g. is it real tight or am I turning it the wrong way???). Used it for couple hours and worked great. Only once did the string bind and I had to take it apart and restring. Need to give it a few more hours of use, but thinking about buying another, for one of my other broken ones.
by
Feb 17, 2022
Works well if compatible and correctly used.
I saw this gem and right off the bat, I thought this was my answer to years of fighting with weed trimming re-stringing issues. My first impression, upon unboxing the Rino-Tuff - Rino-Tuff Universal Fit Pivotrim Autowinder , is that I noticed the build quality is heavy gauge and the string is also a thicker gauge than most factory heads. I then proceeded to look at some common issues with other users and saw a few common denominators of complaints. This head is sold as universal-meaning
: it works with many brands but not all. In some cases, a thicker washer could remedy a better fit purchased at your local hardware store. In other fits, using the right combination of bolts provided and using >Lock-Tite< on the threads prevents the head from coming loose. Most threads are counterclockwise inserted. The rewinding is as simple as can be if done correctly. Simply align the arrows and insert the correct gauge wire (23 ft. of 0.080 in. line and diameters up to 0.105 in) for optimal performance. I recommend cutting the lead wire at an angle for better and smoother threading. Using the wrong size and too much string will cause many issues during trimming. When reloading the string, tie one end to something and hold the other end in one hand as you are winding to add LIGHT tension as you feed the line. This minimizes a scattered ball of string that tends to get intertwined in the head. Finally, If your string isn't feeding during use, don't beat the mess out of it to prevent damage to the head. This prevents two problems-lol. Oh-three: I forgot the cursing. We are all guilty here! If this unit can be attached to your trimmer and the following tips applied, then I highly recommend this autowinder device and feel it will lower one's blood pressure dramatically over any factory installed heads. I am very pleased with this product and the value it offers.
by
Feb 17, 2022
Easy to replace
This is an easy swap for a line trimmer head. There are 3 videos on you tube that show how to replace depending on your trimmer. Basically you remove the old head, disassembly the new head the lm reassemble it onto the trimmer. I thought it was odd that you remove the new line but reinstall action is easy and demonstrates how to install replacement line.
by
Feb 16, 2022
Cannot wait for spring to test this item better.
I picked up this trimmer head as old item going bad and wanted to try something different. I really liked the idea of rewinding the line back into spool for easier working around our properties. The older head had fixed lines and broke way too easy and needed replacements frequently. This head you just cut about 16 feet of line and install the line about halfway through the head, when you wind the line, they will go into the head at same rate. This seems like a no-brainer, but hard to find on heads.
by
Jun 30, 2021
This trimmer head is very easy to install. It includes a written installation sheet, as well as ...
This trimmer head is very easy to install. It includes a written installation sheet, as well as a QR code to refer you to a YouTube video on how to install this on your trimmer. The only tool it required was a skinny flat-head screwdriver to lock the trimmer shaft down to spin the trimmer head off. It also includes a bunch of different adaptors to fit most any trimmer head on the market.
Replacing the trimmer string is pretty easy because you DON'T have to dissasemble th e head to do it. Simply insert string through one side, even it up from other side and then twist head clockwise. Easy peasy!
by
Explore More on homedepot.com
Appliances
Hardware
Kitchen
Lighting
Outdoor Garden
