The Rubbermaid FastTrack Rail system is the ultimate storage solution, allowing you to reclaim the floor by getting items off the ground.
One person can quickly and easily assemble the FastTrack Rail system using everyday tools.
Tailor a storage solution for all belongings by choosing from a variety of Rubbermaid Garage products.
FastTrack Rail Accessories can easily be relocated on the rail as storage needs change.
The FastTrack Rail system can be used to fit the needs of any room from basements to laundry rooms.
The FastTrack Rail Accessories easily snap into place on the rail in seconds.
Heavy-duty steel construction provides years of maintenance-free durability that won't rust with age.
Locking hooks can hold 50 lbs and non-locking hooks can hold 25 lbs.
Choose from a variety of accessories for all belongings, from bike hooks to ball racks.
Rubbermaid shelving can be installed to the FastTrack Rail system for large, heavy items.
Add on additional FastTrack Rails at any time to provide additional storage.
Free up valuable floor space in the garage to help get vehicles back inside.
Pick up the Rubbermaid FastTrack Rail system today and get your home organized.
Assembled Height (in.) | 48 in | Assembled Length (in.) | 48 in |
---|---|---|---|
Assembled Width (in.) | 48 in |
Assembly Required | Assembly Required | Assembly Type | Full Assembly Required |
---|---|---|---|
Color Family | Silver | Included | No additional components or accessories are included |
Kit Size | 15-Piece Kit | Material | Steel |
Package Quantity | 15 | Returnable | 90-Day |
Style | Basics, Casual | Track System Accessory Type | Hooks |
Track System Type | Track System Kit |
Manufacturer Warranty | 1 year limited |
---|
A: Thanks for your interest in our products and reaching out! The Rubbermaid FastTrack Garage Multi-Purpose Kit is designed for indoor/garage use only.
A: I image they can be used outdoors. I have them in my garage and I am pleased with the product
A: I believe you can. The racks are aluminum covered I plastic and the hooks are aluminum covered in rubber.
A: You can, but make sure to use silicone where you use the screws to hold them to what you are attaching them to. You may also want to spray the metal with a clear coat of some type to protect against corrosion.
A: I suspect that they could be used outdoors, however they were likely designed for use in an indoor garage or shop environment.
A: You could if you line the interior with Plywood. With 5/8-inch Plywood you could hold quite a bit on the hooks using 5/8-inch screws. Of course, thicker Plywood would allow you to use bigger screws and heavier loads.
A: Thanks for your interest in our products and reaching out! The Rubbermaid FastTrack Garage Multi-Purpose Kit is recommended for places with studs to attach the rail.
A: Definitely if the walls are sturdy to hold up your intended weights.
A: Depends on the wall width. They come with 1.25 or 1.5 inch screws for mounting. It will be flimsy if it is just screwed into sheet metal. You would want something more substantial like the structural rib of the trailer. Then you have to be concerned with where wiring/cables may run through. And of course you would not want to penetrate through to the outside. Your other option could be riveting and using washers however you have to consider how much weight you are putting on the racks. Riveting would be for lightweight....not a "bunch" of equipment like weed eaters, blowers, trimmers, etc. Your details provided are too vague. Above are the questions you need to ask of yourself (or the manufacturer of trailer). Good luck.
A: I don’t see any reason why not. The top bar needs to be mounted to a secure support. It Carry’s the weight.
A: Thanks for your interest in our products and reaching out! The Rubbermaid FastTrack Garage Multi-Purpose Kit (15-Piece) can accommodate a FastTrack Garage Vertical Ball Rack model number 1784462.
A: Thank you for your interest in our products! To install the Rubbermaid FastTrack Garage Multi-Purpose Kit (15-Piece) with metal studs, you would follow the instructions provided.
A: With "pan head" (a.k.a. metal) screws. Hope this helps.
A: To install the FastTrack on metal studs just substitute the included molly fasteners with sheet metal screws. You may have to drill pilot holes and/or use self tapping screws.
5
160
4
31
3
3
2
6
1
8
Explore More on homedepot.com
How can we help?
Provide Feedback