$13946
Save up to $100 on your qualifying purchase.
Apply for a Home Depot Consumer Card- Removes layers of paint, stain, sealers and epoxy coatings
- Easy to use formula cleans up easily with soap and water
- Covers up to 75 sq. ft. per gallon
- View More Details
How to Get It
Frequently Bought Together
Price:
$13946
Product Overview
Rust-Oleum 1 gal. Paint Stripper for Concrete removes layers of paint, stain, sealers and epoxy coatings. Effectively removes coatings on both interior and exterior surfaces. Convenient and easy to use water-based formula cleans up easily with soap and water.
- Suitable for application on both interior and exterior concrete and masonry surfaces
- Works on vertical and horizontal surfaces, for vertical surfaces, scuff sand with medium grit sandpaper prior to application
- Spread rate covers up to 75 sq. ft. per gallon
- Formulated to effectively remove most coatings from concrete
- Removes layers of paint, epoxies, sealers and more
- Dry times vary depending on surface and air conditions
- Concentrated liquid effectively removes prior coatings
- Easy soap and water clean-up
- Allow coating to remain wet until prior coating wrinkles
- Surface must be dry to touch and visibly dry prior to recoating
- See label for complete instructions
- Online price includes PaintCare fee in the following states: CA, CO, CT, DC, ME, MN, OR, RI, VT, WA
- California residents
Specifications
Dimensions
Container Size
1 Gallon
Details
Interior/Exterior
Exterior,Interior
Number per Package
4
Returnable
90-Day
Warranty / Certifications
Manufacturer Warranty
Satisfaction guaranteed for full refund of purchase price
Questions & Answers
Typical questions asked about products:
- Is the product durable?
- Is the product easy to use?
- What are the dimensions of the product?
Customer Reviews
Nov 30, 2017
I had a 7 year old primer spill and got this Rust-Oleum Paint Stripper because I suspected that o...
I had a 7 year old primer spill and got this Rust-Oleum Paint Stripper because I suspected that over 7 years it had cured and would be a challenge to clean up. The area covered by primer was about 5 square feet. After application, I waited 30 minutes and tried to scrape some of it up. It was working, albeit very slowly. As time wore on, the stripper seemed to be slowing down. After 5 hours the process had not started to wrinkle the primer as indicated on the bottle. I had to leave, so I let it work overnight.
The next day, about 24 hours after I started, I was amazed that the primer easily scraped off the floor. I cleaned up the bulk of the residue and poured a little more on the spot to finish the job with a scrub brush. I used about a half gallon on this old spill. See my pics for a storyboard of how this went.
by
Response from Rust-OleumSupportDec 1, 2017
Thank you for sharing your feedback! To ensure the best results with Rust-Oleum Paint Stripper for Concrete, we recommend reapplying the product as necessary to keep the entire surface covered with a thick layer of Paint Stripper. Older, more difficult coatings may require more time and product to properly remove. One gallon of Paint Stripper will cover up to 75 square feet. Results may vary based on substrate texture and porosity.
- Rust-Oleum Product Support 3
- Rust-Oleum Product Support 3
Nov 28, 2021
Terrible
Save yourself a huge headache. I used this stuff on my stamped concrete. Now it wont come off. I have a 3300 psi pressure washer and grinder and still struggling to remove this stuff. They need to DISCONTINUE THIS GARBAGE.
by
Response from Rust-OleumSupportNov 28, 2021
Oh no, not something we like to hear Shawn. Rust-Oleum Paint Stripper For Concrete is designed to remove layers of paint, stain, sealers and epoxy coatings from concrete surfaces. Give us a call at 888-683-5667 so we can hear more about your application and work to make things right.
- Rust-Oleum Product Support 6
- Rust-Oleum Product Support 6
Feb 20, 2021
Not working for me.
I poured it on my cement patio and let it sit. Now I cannot even get the white rustoleum off my cement. it made it so much worse. I do not know how to fix from here.
by
Response from Rust-OleumSupportFeb 22, 2021
Let's see what we can figure out Gini! Rust-Oleum Paint Stripper For Concrete is used to remove paint from concrete surfaces, it should not be allowed to dry on the surface. Apply the stripper as directed on the label, lightly moving the stripper around on the surface with stiff bristle brush to ensure even coverage. Reapply the product as necessary to keep the entire surface covered with a thick layer of Paint Stripper. To remove the dried stripper from your concrete, reapply as directed on the label, then rinse thoroughly. If you continue to experience issues, give us a call at 888-683-5667, we would be happy to assist you.
- Rust-Oleum Product Support 6
- Rust-Oleum Product Support 6
Aug 8, 2020
Mr. Disappointed Customer
Wanted to try product. Out of stock. Chose Citrus Strip instead. Pretty good results. 2nd half of basement floor. I used this product. Terrible. Did not take off layers of paint. Citrus Strip did a much nicer job and easier to cleanup. I went back over the entire 2nd half with Citrus Strip with excellent results.
Shame on you. Rusto! I want my money back.
by
Response from Rust-OleumSupportAug 10, 2020
Warren, you can reach out to us at (888) 683-5667 to discuss your application of the Rust-Oleum Paint Stripper for Concrete so that we can try to make this right and understand further about your application. - Rust-Oleum Product Support 1
Jun 2, 2020
It worked very well but was rather expensive....
It worked very well but was rather expensive.
by
Apr 30, 2020
Total junkWaste of good $...
Total junkWaste of good $
by
Response from Rust-OleumSupportMay 7, 2020
Let's see what we can figure out Joe! Rust-Oleum Paint Stripper For Concrete is designed to easily remove paint, stains and film forming sealers from garage floors and other concrete surfaces prior to applying a new coating. Apply the Stripper full strength directly onto the floor in a thick layer, lightly move the stripper around on the floor with a stiff bristle brush to ensure even coverage. Do not scrub. Apply more product to areas that appear thin. Rust-Oleum Paint Stripper must remain on the surface and be allowed to penetrate all of the layers of paint or stain to be removed. Re-apply the product as necessary to keep the entire surface covered with a thick layer. It may take 30 minutes to 5 hours for the coating to detach from the surface depending on the type of coating being removed. Floors with multiple layers or more aggressive coatings will require the longest time.
- Rust-Oleum Product Support 6
- Rust-Oleum Product Support 6
Apr 15, 2020
Did not strip as advertised...
Did not strip as advertised
by
Response from Rust-OleumSupportApr 17, 2020
Let's see what we can figure out Ernest! Rust-Oleum Paint Stripper For Concrete is designed to easily remove paint, stains and film forming sealers from garage floors and other concrete surfaces prior to applying a new coating. Apply the Stripper full strength directly onto the floor in a thick layer, lightly move the stripper around on the floor with a stiff bristle brush to ensure even coverage. Do not scrub. Apply more product to areas that appear thin. Rust-Oleum Paint Stripper must remain on the surface and be allowed to penetrate all of the layers of paint or stain to be removed. Re-apply the product as necessary to keep the entire surface covered with a thick layer. It may take 30 minutes to 5 hours for the coating to detach from the surface depending on the type of coating being removed. Floors with multiple layers or more aggressive coatings will require the longest time.
- Rust-Oleum Product Support 6
- Rust-Oleum Product Support 6
May 28, 2019
For the amount of sq ft I needed to remove...
For the amount of sq ft I needed to remove the paint I had a 12 x 15ft patio, this is not the product you want. It needs to be applied in a thick coat to be able to remove two coats. I would have needed gallons of this to realistically remove all of the paint on the patio.
by
Response from Rust-OleumSupportMay 29, 2019
Thank you for reaching out, Drew! Each gallon of Rust-Oleum Paint Stripper for Concrete has a recommended coverage of 75 square feet per gallon. The results may vary depending on the substrate texture and the thickness of the coating.
- Rust-Oleum Product Support 3
- Rust-Oleum Product Support 3
Nov 12, 2018
DONT BUY!!! Being the handy guy that I am, I never write reviews but I feel I need to on this pro...
DONT BUY!!! Being the handy guy that I am, I never write reviews but I feel I need to on this product. I used 4 gallons of this to remove a water based sealer on my garage concrete floors. It did nothing but make a bigger mess and problem. Followed the directions clearly and all it did was make the floors very VERY SLICK! Guy at Home Depot said it was the best product out there and what a joke that was. The employees of HD I feel like need to be better trained on what products work besides pushing a "named brand product" that doesn't work.
I ended up having to rent a concrete floor grinder as well as use my power washer to get the sealer removed. Wasted my entire weekend that only had 1 layer of sealer on it. Wasted $140 on this product for NOTHING. Would have more fun wasting that money at the casino.
by
Response from Rust-OleumSupportNov 13, 2018
Let's talk through this, Kyle! Once the coating of Rust-Oleum Paint Stripper for Concrete is visually wrinkled, it is ready to be removed. Test an area to see if it removes easily with a scraper. If it does not remove easily, apply additional product to the surface. It may take 30 minutes to 5 hours for the coating to detach from the surface depending on the type of coating being removed. Floors with multiple layers or more aggressive coatings will require the longest time. - Rust-Oleum Product Support 5
Jan 2, 2018
Works surprisingly well! I got this product with low expectations, and they were exceeded on all ...
Works surprisingly well! I got this product with low expectations, and they were exceeded on all fronts. I used this to strip multiple layers from the conrete slabs that serve as the balcony ledges in a duplex I am working on. It cut through multiple layers in relatively cold weather with an ease and at a speed I did not expect. The product is about the same consistency as standard paint stripper products, so learning how to work with it is easy. I can definitely find multiple uses for this stuff.
by
Explore More on homedepot.com
Bath
Hardware
Outdoor Living
Tools
