32 oz. Ultra Cover Flat Gray Primer General Purpose Paint

Thanks for reaching out Bruno. Rust-Oleum Painter's Touch Ultra Cover Primer can be applied to metal, wood, plaster, masonry and unglazed ceramic, including properly dried pressure treated wood. If pressure treated wood has been allowed to dry for at least 6 months, paint may not adhere properly. - Rust-Oleum Product Support 6

Thank you for reaching out! Most types of silicone caulking and other types of silicone are not paintable, and our Rust-Oleum Painter's Touch Ultra Cover Gray Primer will not properly adhere to this surface. - Rust-Oleum Product Support 2

Happy to help Liz! Prior to applying Rust-Oleum Painter's Touch Ultra Cover Primer, remove any loose coating with a wire brush or sandpaper. If the polyurethane is peeling from the surface, it should all be removed prior to priming. When painting over a coating that continues to lift from the surface, whatever was applied over that clear will also lift. If the remaining polyurethane is a sound, well bonded surface, it can be scuff sanded and painted. - Rust-Oleum Product Support 6

Thanks for reaching out Johnny. Rust-Oleum Painter's Touch Ultra Cover Brush Primer can be applied to bare or painted wood, metal, plaster, masonry or unglazed ceramic. It can be applied to your foundation. - Rust-Oleum Product Support 6

If you don't want extremely visible brush strokes, you must sand!

Good question. To prep the surface prior to applying Rust-Oleum Painter's Touch Ultra Cover Paint you should remove all dirt, grease, oil, salt and chemical contaminants by washing the surface with a commercial detergent, or other suitable cleaning method. Rinse with fresh water and allow to thoroughly dry. Remove loose paint and rust with a wire brush or sandpaper. Previously coated surfaces must be sound and in good condition. Smooth, hard, or glossy finishes should be scarified by sanding to create a surface profile. As a water based coating we do not recommend prepping the surface with mineral spirits or acetone. - Rust-Oleum Product Support 6

Yes, Michael! Rust-Oleum Painter's Touch Ultra Cover Primer can be used over previously painted surfaces that are in good, sound condition. - Rust-Oleum Product Support 3

Good question! We recommend that Rust-Oleum Painter's Touch Ultra Cover Primer be applied with a good quality synthetic brush or roller. We do not recommend this be applied with a spray gun. - Rust-Oleum Product Support 6

Good question Carey! Rust-Oleum Painter's Touch Ultra Cover Primer Brush On can be top coating with any Rust-Oleum oil based paint. The primer should be allowed to dry for 2 to 4 hours before top coating. - Rust-Oleum Product Support 6

Rust-Oleum Painter's Touch 2X Ultra Cover Primer is not intended for use on surfaces that will reach temperatures above 200°F or be exposed directly to an open flame. Our high-heat coatings are not suitable for use on surfaces that will have direct contact with an direct or open heat source, such as the inside of a fireplace. - Rust-Oleum Product Support 3