Model # 7860519

Internet #202246270

Store SKU #486783

Rust-Oleum Specialty 1 qt. White Tub and Tile Refinishing Kit
0020066786090

Rust-Oleum Specialty

1 qt. White Tub and Tile Refinishing Kit

  • Refinish tub, tile or sinks in less than 1 day with epoxy paint
  • Creates the look and feel of a porcelain tub
  • Durable coating retains color and sticks in high moisture areas
$ 24 67
Loading Options
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

Product Overview

  • Refinish tub, tile or sinks in less than 1 day with epoxy paint
  • Creates the look and feel of a porcelain tub
  • Durable coating retains color and sticks in high moisture areas
Rust-Oleum 1 qt. White Tub and Tile Refinishing Kit is a two-part epoxy acrylic designed to rejuvenate ceramic and porcelain surfaces like tubs, sinks and showers in just minutes. Specially formulated to provide excellent adhesion, durability and color retention in high moisture areas. It applies a smooth, porcelain-like finish that resists mildew growth for long-lasting protection and beauty.
  • Apply to ceramic, porcelain or fiberglass tubs, sinks and tiles
  • Durable and corrosion-resistant finish
  • Covers up to 110 sq. ft. or 2 coats on a standard bathtub
  • Glossy, porcelain-like, waterproof finish
  • Tough, hard protective coating acts like porcelain and ceramic
  • Dries to the touch in 1 hour, allow surface to fully dry for 3 days prior to water exposure
  • Two-part epoxy acrylic formula withstands moisture and extreme hot temperatures
  • Cleans up easily with mineral spirits
  • California residents see Prop 65 WARNINGS

Product Overview

  • Refinish tub, tile or sinks in less than 1 day with epoxy paint
  • Creates the look and feel of a porcelain tub
  • Durable coating retains color and sticks in high moisture areas
Model #: 7860519
Sku #: 486783
Internet #: 202246270

Rust-Oleum 1 qt. White Tub and Tile Refinishing Kit is a two-part epoxy acrylic designed to rejuvenate ceramic and porcelain surfaces like tubs, sinks and showers in just minutes. Specially formulated to provide excellent adhesion, durability and color retention in high moisture areas. It applies a smooth, porcelain-like finish that resists mildew growth for long-lasting protection and beauty.

  • Apply to ceramic, porcelain or fiberglass tubs, sinks and tiles
  • Durable and corrosion-resistant finish
  • Covers up to 110 sq. ft. or 2 coats on a standard bathtub
  • Glossy, porcelain-like, waterproof finish
  • Tough, hard protective coating acts like porcelain and ceramic
  • Dries to the touch in 1 hour, allow surface to fully dry for 3 days prior to water exposure
  • Two-part epoxy acrylic formula withstands moisture and extreme hot temperatures
  • Cleans up easily with mineral spirits
  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Product Depth (in.)
4.25
Product Height (in.)
7.75
Product Size (oz.)
32.0
Product Width (in.)
4.50

Details

Color
White
Color/Finish
Gloss White
Dry to touch (min.)
60.0
Interior/Exterior
Interior
Kit
Yes
Paint Tool Product Type
Tub and Tile Paint
Patching & Repair Product Type
Porcelain Repair
Product Weight (lb.)
3.4lb
Returnable
90-Day
Sheen
Gloss

Specifications

Dimensions

Product Depth (in.)
4.25
Product Height (in.)
7.75
Product Size (oz.)
32.0
Product Width (in.)
4.50

Details

Color
White
Color/Finish
Gloss White
Dry to touch (min.)
60.0
Interior/Exterior
Interior
Kit
Yes
Paint Tool Product Type
Tub and Tile Paint
Patching & Repair Product Type
Porcelain Repair
Product Weight (lb.)
3.4lb
Returnable
90-Day
Sheen
Gloss

Questions & Answers

I have a large sink in the laundry room that is rusted. Is it necessary to sand this first befor...

I have a large sink in the laundry room that is rusted. Is it necessary to sand this first before using this product, or can I use a roller only?
Asked by: Jackie
I re-glaze bathtubs and tile as well as sinks. Yes if there is any rust it must be sanded down and try to remove the stain by sanding until it is almost not visible. Thoroughly clean all areas with a abrasive cleaner then rinse with water to get the grit off of the surface. Then roll on 2 -3 smooth coats waiting 1 hour in between coats. This is the best product on the market as far as what you can buy from a hardware store .
Answered by: Nathan
Date published: 2019-02-26

is the finish smooth?

is the finish smooth?
Asked by: mike
I sprayed mine on and it came out very smooth. I am guessing it will "flow" well if brushed on and the resulting finish will also be smooth. Mine has been on six months and im very happy with the result. Do not do any shortcuts on the prep work and you should be happy with the result.
Answered by: Handy
Date published: 2018-11-18

My current tub is blue and really wanna change it to white is using this possible to make this happen

Asked by: Julie
Yes, my tub was tan. It did a great job covering with two coats.
Answered by: DC
Date published: 2019-02-25

Will this kit cover the whole one piece shower/tub enclosure? Or do I need to buy 2 kits? Does ev...

Will this kit cover the whole one piece shower/tub enclosure? Or do I need to buy 2 kits? Does everything come in the kit, or what else do I need to buy?
Asked by: bunnyjo4
Judging by how much it took to cover just the faux marble panels in my hall bathroom, I have bought 2 kits to do the shower in my master bathroom because it's almost the size of the tub and walls in the hall. Things I learned from my first time using this product: Preparation is key-don't skip any part. Remove the fixtures and tape off pipes and walls, shower doors (remove if you can). I have completely removed the shower door because I planned to replace it anyway. Check the box for the right kind of roller and brushes! (I had a small foam roller I thought would give a nice smooth surface-it stretched and it was just nasty) Make sure you have good ventilation and wear a mask! I'm waiting for a time when I can have the doors and windows open for at least 3 days. It will take at least 3 days before you can stand to be in that bathroom. Remove all caulking because nothing sticks to silicone caulking and you're going to recaulk anyway. If you spill any paint, wipe off immediately. Rubbing alcohol and a clean cloth or even paper towels will remove what's left. Will it look like a brand new shower, no. But it's going to look almost as good at a much better price! And it will allow you to keep using your shower while you save the money for your dream bathroom!
Answered by: AZLady
Date published: 2019-01-17
  • y_2019, m_4, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_646
  • loc_, sid_202246270, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 36ms
  • QUESTIONS, PRODUCT

Customer Reviews

1 qt. White Tub and Tile Refinishing Kit is rated 4.0 out of 5 by 837.
Rated 5 out of 5 by from I would give this product more stars if I could for the hundreds of dollars I saved! * 1 Kit co... I would give this product more stars if I could for the hundreds of dollars I saved! * 1 Kit contains plenty of paint for 3 coats. *Sanding- My rental was worn to the metal and scratched. I used very coarse sandpaper (recommended was WAY too fine!!!) The smoother you sand, the better the results. * A dark rag and tack cloth between coats...dirt/dust kept happening. * Ventilation - they're not kidding!! Extremely strong LINGERING fumes for days. * I used a baby roller and a small touch up brush for edges. Curves need baby roller. * The next day 3rd coat was not nearly as smooth as the first 2. The paint had thickened and was not as self-leveling. I would skip if not a rental. * Paint did come off the drain (says remove all metal (ha-ha)) I duct taped it.
Date published: 2019-01-26
Rated 5 out of 5 by from Refinished a 1950’s metal tub with major rust. Preparation is very important. PLEASE use a respi... Refinished a 1950’s metal tub with major rust. Preparation is very important. PLEASE use a respirator, chemical gloves and protective clothing! Before I attempted the job, I found watching YouTube videos very informative, especially NYBath Reglazers. Make sure you protect the area you do not want to damage and VENTILATE! I protected about 24 inches up the wall and on floor, and the toilet next to the tub. I followed most of the directions, but added a few steps. Since my tub had been painted by the previous owner I had to apply paint stripper & scrape. After this I etched my tub using XIM44082 Etching cream (Amazon). The etching is better than could ever be sanded and the RustOleum will adhere better. After etching, I had to repair around the drain that I sanded with a Dremel, cleaned tub with CLR, and once dry refilled with JB Waterweld. Sanded smooth with 300 Grit wet sandpaper, wiped down thoroughly and followed directions & got 2 coats. Allowed a week before using tub. I am very pleased with results.
Date published: 2017-05-20
Rated 5 out of 5 by from Solid Finish. Get a Respirator. I have a single tub/shower unit that I wanted to keep. I tore a hole in it to remove the valves and replace them. I replaced the fiberglass piece that I took out by using wood strips as backers. I fiberglassed over the area and then used Bondo to smooth things out. Finally, I gave a coat of Epoxy Paint. The one can covered the entire area because it had a similar color underneath. There was some bubbling on the tub bottom that I had to scrape off an repaint. You only have 6 hours before the paint hardens in the can, so don't wait long. I used a dust mask which is NOT sufficient. I must have been out of my mind. Get a good respirator for $30-40.00. Even with the respirator.... keep going out for air every 5 minutes. Wear good goggles as well. This stuff is toxic. Take every precaution. In the end.... it gave a great, smooth glossy finish that is like a rock! It looks like a new tub area! PS... Forget saving the brushes. They will be toast.
Date published: 2016-09-20
Rated 5 out of 5 by from Looks and worked great! Before i decided on repainting our tub I scoured the internet on rustoluem tub and tile. There are mixed reviews all over the interent. I’m glad I decided not to replace our old heavy duty cast iron porcelain tub. A couple things I’d recommend though. Follow the instructions to a t. Don’t cut corners if you want a good long lasting finish. I used the comet then the lime a way, then I sanded. First with 120 grit, then 220, 400, then lastly 600 like the box states. What some people dont know is the lime a way is used to etch the surface. After I sanded I used the scotch brite pad and lime a way three more times. Just to make sure it was etched properly. After i rinsed it all and it dried I wiped the tub down with a clean rag and alcohol. Then I started painting. I used a 4 inch 1/4 nap roller from wooster at home depot and a purdy 1.5 inch brush. You can clean up the brush with lacquer thinner. Also buy a quart mixing cup from home depot and a metal paint pan. For every coat put a piece of aluminum foil in the pan if it has hardend paint in it from the previous coat. Or it will activate the hard paint from the last coat. Only mix what your going to use and you won’t need two kits. For a standard tub 1 kit should yield 4 coats. The paint isn’t that hard to work with like a lot of people say it is. You’ll definetly need a good respirator. Do not use any foam rollers or brushes. They will fall apart and ruin the finish. If you want a good finish use good tools. I did the first coat and waited an hour after first coat to do the second coat. Then I waited 24 hours to do the third coat. After the third coat it needed a fourth coat as our tub was blue before. I waited 24 hours after the third coat to do the fourth coat. Also if you use the quart mixing cup you will use the 4:1 ratio. The first line in the column 4:1 is where you fill the paint up to. The second line is how much activator. Here is a link with better directions then what is on the box. https://www.rustoleumibg.com/images/tds/CBG_SPECIALTY_TDS_TUB_TILE Kit 309 Final.pdf
Date published: 2019-03-02
Rated 5 out of 5 by from I used this to refinish our ugly looking laundry/utility sink.... I used this to refinish our ugly looking laundry/utility sink. I applied two coats and the finish came out very smooth. Looks like new. Much less work & lower cost than replacing an existing sink. The quart goes a long way so you can finish many items. The paint does give off a strong odor so be sure to have a fan available to vent the room while the paint is drying. Very pleased with the results.
Date published: 2019-01-22
Rated 5 out of 5 by from Really Good Product As with any coating, surface preparation is the key to make this product work well. There are a lot of steps but it is necessary to get proper adhesion. Also, you must pour the activator into the paint can, put the lid on and shake by hand for a couple of minutes. This will ensure proper adhesion as well. The most important step is to not use the tub for at least 3 days. I went on vacation for a week after I finished so I got 7 days to let the coating cure. I used two cans to put two coats on the tub and tile surround. I cut in the edges with a quality brush and used a roller for the rest. I am extremely satisfied so far but it has only been one month. It seems to have a durable finish though. The only slightly negative thing I have noticed is the tub is pretty slippery but that isn't something a bath mat can't take care of. I'll try to remember to post an update after 6 months of use.
Date published: 2016-07-14
Rated 4 out of 5 by from Great value, met my expectations I used this item to cover pink accent tiles in my bathroom. We don't have the budget in the near term for a bathroom re-do, so I was looking for something to make it easier to redecorate and neutralize the pink. Biscuit is a bright (almost white) off-white. I followed the prep instructions, taped off the tiles, and painted them with a cheap, small brush expecting it would be ruined by this product (it was). The self-leveling properties are great and overall this product achieved the effect I was looking for in two coats. Unfortunately, the finish still looks painted when inspected up-close. This would probably be improved had I used a small roller instead of a brush. I only used half of the paint that came in the box, so I may gently sand down the finish and re-coat with a third if it bugs me. That said, I am very happy with the look I was able to achieve with this inexpensive solution.
Date published: 2014-01-25
Rated 5 out of 5 by from This is an awesome product!!! It dries fast and cures to a beautiful tile finish, which is easy ... This is an awesome product!!! It dries fast and cures to a beautiful tile finish, which is easy to clean! This is the 2nd time I've used this product in my house. It really works great! I used a respirator mask and didn't mind the fumes at all. I used 1 can for the tub and applied 3 coats. I did 2 coats on the walls with 1-1/2 hour drying time in-between. I used 3 cans for this entire project. One can dedicated to the tub alone. $80 bucks to go from ugly, dated pink to bright, updated white! Love this product!!! Nobody believes this was all done by paint, they think it's a brand new tub and original white tiles! The best part is that you're also painting the grout, so even though it looks like tile with grout, cleaning is a breeze! No more dirty grout! This is a 5 star product EVERY TIME!!!
Date published: 2018-05-17
  • y_2019, m_4, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_837
  • loc_, sid_202246270, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 50ms
  • REVIEWS, PRODUCT