![]() | ![]() | ![]() | ![]() | |
Brand | STYRO Industries | STYRO Industries | STYRO Industries | STYRO Industries |
Name | 2 Gal. Foundation Grey FlexCoat Brush on Foundation Coating | 2 Gal. Tanner FlexCoat Brush on Foundation Coating | 2 Gal. White FlexCoat Brush on Foundation Coating | 5 Gal. Concrete Grey Tuff II Foundation Coating |
Price | $5140 | $5499 | $5604 | $9092 |
Ratings | (40) | (3) | (15) | (82) |
Container Size | 2 Gallon | 2 Gallon | 2 Gallon | 5 Gallon |
Substrate/Surface Usage Type | Brick,Concrete,Plaster,Stone | Brick,Concrete,Plaster,Stone | Brick,Concrete,Plaster,Stone | Brick,Concrete,Plaster,Stone |
Sheen | Flat/Matte | Flat/Matte | Flat/Matte | Flat/Matte |
Paint/Stain Features | Mildew Resistant,Moisture Resistant,Paint & Primer in One,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,Washable | Moisture Resistant,Moisture Resistant,One Coat Coverage,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,Washable | Mildew Resistant,Moisture Resistant,One Coat Coverage,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,Washable | Mildew Resistant,Moisture Resistant,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,Washable |
Base Material | Acrylic | Acrylic | Acrylic | Acrylic |
Coverage Area (sq. ft.) | 80 | 80 | 80 | 80 |
View Product | View Product | View Product | View Product |
![]() | ![]() | ![]() | ![]() | |
Brand | STYRO Industries | STYRO Industries | STYRO Industries | STYRO Industries |
Name | 2 Gal. Foundation Grey FlexCoat Brush on Foundation Coating | 2 Gal. Tanner FlexCoat Brush on Foundation Coating | 2 Gal. White FlexCoat Brush on Foundation Coating | 5 Gal. Concrete Grey Tuff II Foundation Coating |
Price | $5140 | $5499 | $5604 | $9092 |
Ratings | (40) | (3) | (15) | (82) |
Container Size | ||||
Substrate/Surface Usage Type | ||||
Sheen | ||||
Paint/Stain Features | ||||
Base Material | ||||
Coverage Area (sq. ft.) | ||||
View Product | View Product | View Product | View Product |
On new foam it says to rough up the surface with a wire brush. So a rough surface is desired. As long as the ICF has not degraded to foam powder, or if you remove the degraded foam, I think it would work great.
It can but it is pretty "gloppy". I used a thick wallpaper brush and got good results.
It does degrade with exposure to sunlight...
Would not recommend on floor. It's not durable enough for foot traffic.
Yes it can that's what its made for, I used a wide wall paper glue brush to apply it. worked well and left a nice texture
The curing temperature is 40 degrees minimum! The warmer the day the quicker it will cure. If applying in direct sunlight I suggest thinning it with small amounts of water to minimize excess build up and improve coverage
That is a trick question. You can apply this with a bristle brush ,(my choice), or a roller. How heavy a coat and how warm it is can really chew up material. The manufacturer says 200 square feet. At first I thought that that was a stretch but I found that by adding small amounts of water to thin the mixture as I was applying it allowed me to get better coverage. The down side is that I got to go around the foundation twice! However... I had better coverage and a very nice end result.
It is a medium gray. To me it looks very much like a cement foundation color.
The manufacturer states that it should be fine for 10 years or so. I'm exposed to sun for the majority of the day. I chose this product because of the UV inhibitor in it. Touch up as necessary however it might be awhile!
Hello Greg, It will depend on the type of coating that was used. Most foundations are coated with a cement or acrylic coating, which FlexCoat will bond to. However occasionally they are done with another material which will not work with our products. You can contact our technical department at 888-702-9917, and they will be able to assist you further.