#1 Home Improvement Retailer

Internet #

203009635

Model #

TTT

5 Gal. Tanner Tuff II Foundation Coating

Contains 5 gallons ($24.89 /gallon)
$124.45
Apply Now
Pay $99.45 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Adheres to most materials to ensure versatile use
  • 5 gal. coating approximately covers 80 sq. ft.
  • Helps protect foam insulation boards from harmful UV rays
  • View More Details
caret

Product Details

Protect and beautify your foundation insulation or ICF, (Insulated Concrete Forms), by applying Tuff II 80 SF 5 Gal. Foundation Coating. The coating protects the rigid foam insulation board or ICF from U.V. exposure and physical damage. The coating can also be used to create attractive stucco like finishes on concrete, brick or masonry walls or to finish drywall without the hassle of mudding. The coating also helps control moisture.
  • Protects and beautifies foundation insulation, insulated concrete forms and other surfaces
  • Helps control moisture
  • Blocks ultraviolet rays
  • Adheres to most materials, offering numerous use options
  • Can be applied with a trowel, drywall knife or hopper style sprayer
  • Pre-mixed, all-in-one primer, base and finish coat
  • Available in a variety of colors and textures
  • Won't chip or flake and is weed-wacker resistant, providing extreme durability
  • 100% acrylic, environmentally safe and non-toxic
  • Return Policy
  • California residents
caret

Specifications

caret

Questions & Answers

16Questions
caret
Q:Is this heat resistant? I'd like to apply it to an outdoor kitchen cabinet. I'll have a cement backboard over metal studs. I'll have a smoker and a BBQ grill installed in the cabinets. They can get very warm on the outside. Will be 1/2"+ air gap.
by|Mar 17, 2023
0 Answer
Answer This Question
caret
Q:Do you need to put mesh over styrofoam before coating or can you just apply directly to styrofoam
by|Jan 30, 2022
2 Answers
Answer This Question

A:  Need mesh

by|Jan 31, 2022

    A:  yes it helps reinforce the coating . they sell a wide roll of sticky mesh. also pre-spot fasteners with coating before applying mesh

    by|Jan 31, 2022
      caret
      Q:can it be applied to painted metal?
      by|Nov 22, 2020
      0 Answer
      Answer This Question
      caret
      Q:Can this be applied to cement board without using a wire
      by|May 21, 2020
      0 Answer
      Answer This Question
      Showing 1-4 of 16
      caret

      Customer Reviews

      4.9 out of 5
      (13)
      • 4.9
        out of 13 reviews
      • 89% recommend this product
      Filter by:
      Showing 1-10 of 13 reviews
      Very impressed! Fixed what nothing else could.
      Went on super easy. We had a ton of exposed foundation foam to cover. Just be careful with it in regards to making sure you are not working in direct sunlight. I added before and after photos.
      by
        • Recommended
        Absolutely What The Job Required
        We had Styrofoam over cement brick on our exterior basement walls. The original cement looking covering had cracked off over 25 years and there were holes in the Styrofoam. I applied sticky mesh tape then used a hopper to spray the first thin coat of Tuff II (tanner color) over the mesh. I then applied two more coats by hand as I wanted a stucco look. It hardened beautifully and looks great. I am very pleased with the results and loved being able to coordinate the color with our siding. Home Depot shipped for free to our door. Successful project completed.
        by
          Well first of all I received White, not the Tanner color. No biggie as I was pretty sure I'd pai...
          Well first of all I received White, not the Tanner color. No biggie as I was pretty sure I'd paint it anyways. I have used this product several times and have been very pleased with the results. It's like a miracle in a 5 gallon bucket.
          by
          • DIY
          • Verified Purchase
          • Recommended
          I used Tuff II to cover 2" of Dow Corning Foamular XPS rigid foam on the outside of our basement ...
          I used Tuff II to cover 2" of Dow Corning Foamular XPS rigid foam on the outside of our basement walls. Living in NY state, rigid foam is required in basements, but it can be either on the inside or outside of the foundation. If on the inside, there's the added expense of finishing off the walls so as not to leave the rigid foam exposed. On the outside, it's only necessary to coat the foam with something to keep it from being exposed to sunlight and from chipping and cracking. I used 2 coats of Tuff II over sticky mesh. It trowels on easily, though the process itself is a bit of a learning experience. When you start out, you'll probably find a third of it goes on the ground, at least until you get the hang of troweling it onto your walls. The end result is very nice. A tough coating that doesn't need paint and resists denting and chipping from the errant stone from your lawn mower or abuse from a weed whacker. I am convinced this is an excellent way to solve the problem of exposed rigid foam.
          by
          • Verified Purchase
          • Recommended
          1 found this review helpful
          Rating provided by a verified purchaser...
          Rating provided by a verified purchaser
          by
            Rating provided by a verified purchaser...
            Rating provided by a verified purchaser
            by
            • Verified Purchase
            Great product! Used over exposed Liteform, followed the instructions by...
            Great product! Used over exposed Liteform, followed the instructions by lightly brushing the surface with a wire brush, placing sticky mesh over that, then troweled on with a 6” drywall taping knife for the first coat. Second coat I used a very rough texture roller and knocked that down with a 12” drywall knife. Looks just like stucco, seems very tough, dirt just rinses off with a hose. I get lots of compliments, and really gave my house a finished look.
            by
            • Verified Purchase
            by
            • Verified Purchase
            • Recommended
            This product delivers everything it says it will. Easy application after applying the mesh screen...
            This product delivers everything it says it will. Easy application after applying the mesh screen. Stays workable long enough to smooth or texture.
            by
            • Verified Purchase
            • Recommended
            Worked very well you do need to wear gloves and...
            Worked very well you do need to wear gloves and old work clothes because this stuff stains. Great product for my outdoor kitchen hardy board surface.
            by
            • Verified Purchase
            Showing 1-10 of 13 reviews

            Frequently Bought Together

            +
            +
            Price:
            $12445

            Compare Similar Masonry Paint

            current product
            5 Gal. Tanner Tuff II Foundation Coating
            5 Gal. Vacation FlexCoat Brush on Foundation Coating5 Gal. Thicket FlexCoat Brush on Foundation Coating5 Gal. Taupe Sand FlexCoat Brush on Coating
            BrandSTYRO IndustriesSTYRO IndustriesSTYRO IndustriesSTYRO Industries
            Name5 Gal. Tanner Tuff II Foundation Coating5 Gal. Vacation FlexCoat Brush on Foundation Coating5 Gal. Thicket FlexCoat Brush on Foundation Coating5 Gal. Taupe Sand FlexCoat Brush on Coating
            Price
            $12445
            $15521
            $15711
            $16669
            Ratings
            (13)
            (2)
            (3)
            (9)
            Container Size5 Gallon5 Gallon5 Gallon5 Gallon
            Substrate/Surface Material UseBrick,Concrete,Plaster,StoneBrick,Concrete,Plaster,StoneBrick,Concrete,Plaster,StoneBrick,Concrete,Plaster,Stone
            Paint/Stain FeaturesMildew Resistant,Moisture Resistant,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,WashableMildew Resistant,Moisture Resistant,One Coat Coverage,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,WashableMildew Resistant,Moisture Resistant,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,WashableMildew Resistant,Moisture Resistant,One Coat Coverage,Paint & Primer in One,Pattern spray adjustment,Textured,UV/Fade Resistant,Washable
            SheenFlat/MatteFlat/MatteFlat/MatteFlat/Matte
            Base MaterialAcrylicAcrylicAcrylicAcrylic
            Coverage Area (sq. ft.)80 sq ft200 sq ft200 sq ft200 sq ft
            View ProductView ProductView ProductView Product