i have not ever had to have them to cut any for me.
Hello. Thank you for your question. Yes, this product is considered ACX.
most plywood are but you wood have to cut a pies off the end and put in water and see if it comes apart.
Hello. Thank you for your question. Roseburg recommends the use of a quality primer + two coats of a 100% acrylic latex house paint. All exposed edges should also be painted and be placed at least 6” above the ground. Re-application of paint is required as recommended by the paint manufacturer or more often as necessary to maintain a good seal of the wood. Solid color stains may also be used, but typically require re-application more often. If you have any further questions please reach out to me at firstname.lastname@example.org.
Hello. Thank you for your question. Yes, this product would be perfect for a wainscot panel to be painted. Although the face was been sanded at the factory, we recommend to sand the panel again before painting.
Hello. Thank you for your question. Please contact your local Home Depot for cutting options.
This is a good one side product. The back is not sanded and does have open splits and knot holes.