|Bowl Height without Seat (in.)||16.75||Flush Valve Size (in.)||3|
|Product Depth (in.)||28.5 in||Product Height (in.)||32 in|
|Product Width (in.)||17.75 in|
|Bowl Height||Chair Height||Bowl/Seat Shape||Elongated|
|Commercial / Residential||Residential||Features||No Additional Features|
|Flushing Technology||Pressure Assisted||Flushing Type||Single Flush|
|Gallons Per Flush||1.28||Handle Location||Left|
|Included||Complete Kit, Seat||MaP Performance Rating||Not Rated|
|Material||Ceramic||Mount Location||Floor Mount|
|Product Weight (lb.)||93 lb||Returnable||90-Day|
|Rough In Size||Wall-Mounted||Seat Front Type||Closed|
|Style||Minimalist, Modern||Toilet Type||Two-Piece|
|Trapway Diameter (in.)||3||Trip Lever Location||Left Side|
|Certifications and Listings||ADA Compliant||Manufacturer Warranty||Limitied Warranty|
A: Per the manufacturer’s technical department, you can. However, they recommend you tie it at the highest point possible and also make sure it is tied to the top of the pipe if the stack runs horizontally. For further questions or explanation Saniflo can be reached at 732 305 2200.
A: Please scroll down the Home Depot product listing page to the section entitled Product Details. If you expand that section, you will find PDFs of the product document. Both the instructions and the installation guide contain rough drawings showing the location of the two additional side taps. The taps on the top are for the discharge and the vent.
A: These questions are routed to the technical department of the supplier. Although I can answer technical questions about the product, I am not able to give you an estimated cost of installation. Even though I am a plumber I would not make a guess without seeing the job site. I would suggest you contact a local qualified licensed plumber. If they come out to the job site and you tell them what you are looking for they should be able to give you an estimate.
A: If you scroll down the Home Depot product listing page you will come to a section entitled Product Details. If you expand that section, you will find PDFs of the product documents. Information concerning venting can be found in the instructions. It states the following, “The macerating unit must be vented. It has a 1-1/2” inlet on the top of the cover meant for this connection. It must be connected to a vent system according to your local plumbing codes.” Further it also states elsewhere that mechanical vents cannot be used.