I don't see why not as long as it meets your localitie's plumbing code. I understand one person ran a 1 1/2 pipe with a 20% positive incline and worked fine.
No. Mine is on a concrete slab.
I recommend going to the Saniflo home page and research there. They do require gfci circuits tho.
Sounds like a "logjam" unfortunately the back cover needs to be removed and the pump area cleaned or try plunging the toilet if obstructed there.
Yes a sink can be connected to the maseration unit which also pumps the waste from the toilet.
Yes...you can install this unit anywhere that you can (or) have access to a 110 AC power source, a 2" vent line and a discharge /drain line.
I attached a sink and I think that you can add a shower as well. I did not have space for a shower
Hello, this will work. You can simply use the plastic pipe hangers found in the plumbing section. Don’t forget the correct pipe slope for the length of run you are using.
Yes it is one complete unit.
I built a 2x6 platform with 3/4” plywood on top which gave me just enough room for the shower drain and a 90° elbow which also give me just enough room to leave a quarter-inch pitch for water drainage. Sani flow is behind the toilet against the opposing wall