#1 Home Improvement Retailer

Internet # 314546673

Model # SO7614

Store SKU # 1005731476

Seal-Once Marine 1 gal. Clear Premium Wood Sealer and Stain for Exterior Use

$66.98
/gallon
Apply Now
Pay $41.98 after $25 OFF your total qualifying purchase upon opening a new card. info
Apply for a Home Depot Consumer Card
  • Formulated to protect marine wood from water damage
  • Clear formula enables natural aging of wood
  • Mold and mildew-resistant for easy maintenance
  • View More Details
Store
0 in stock
icon
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy

Product Details

About This Product

SEAL-ONCE has been leading the innovation in the use of nanotechnology to create long-lasting, Eco-friendly wood sealers and tinted wood stains since 2005. MARINE Premium wood sealer and dock stain is specifically formulated to provide the highest level of protection for wood structures, situated near open water. Wood used on boat docks, decks, and retaining walls near rivers, lakes, ponds or the ocean is subjected to near constant moisture. MARINE provides the highest level of protection in those environments. It is a great investment to extend the useful life of wood subjected to these harsh marine conditions. SEAL-ONCE MARINE Premium Waterproofing Wood Sealer and Stain is designed to protect and stabilize marine wood against water damage, salt water spray and decay. Unlike many top-coat sealers on the market today, it penetrates wood below the surface, coating the wood fibers at the cellular level, which creates a long-lasting, flexible, breathable barrier. It provides long-lasting protection from the inside out. Clear formula allows wood to age naturally without decay, morphing to a rich silver-gray over time. Seal-Once Marine, when tinted as a wood stain, gives added UV protection from sun rays. Prevents long-standing water accumulation for up to 10 years on vertical and 6 years on horizontal surfaces.

Highlights

  • Safe for use over open water
  • non-hazardous to aquatic life
  • Water-based, ultra-low VOC
  • Eco-friendly, non-toxic, no odor
  • Creates flexible, breathable barrier
  • Helps resist mold, mildew and wood rot
  • Stabilizes wood from warping
  • Extends natural life of wood
  • Easy soap and water clean-up
  • Clear allows the wood to grey naturally
  • Won't harm people, pets or plants
  • Penetrates below the surface
  • Return Policy

Product Information

Internet # 314546673

Model # SO7614

Store SKU # 1005731476

Additional Resources

Shop All Seal Once

Specifications

Dimensions

Container Size

1 Gallon

Coverage Area (sq. ft.)

275 sq ft

Details

Application

Wood Deck Stain & Sealer

Application Method

Brush, Paint Sprayer, Roller

Base Material

Water Based

Color Family

Clear

Color/Finish

Clear

Dry to Touch (min.)

90

Interior/Exterior

Exterior

Maximum Optimal Temperature (F)

95

Minimum Optimal Temperature (F)

45

Number per Package

1

Paint/Stain Clean Up

Soap & Water

Paint/Stain Features

Dries Clear, Low Odor, Waterproof

Recommended Number of Coats

2

Returnable

90-Day

Stain & Sealer In One

Yes

Substrate Condition

Pressure Treated Wood, Unfinished Wood

Substrate/Surface Material Use

Wood

Surface Location

Deck, Exterior Wall, Patio, Pool Deck

Textured/Smooth

Smooth

Time before recoating (hours)

.5

Transparency

Clear

Vertical/Horizontal

Vertical / Horizontal

Warranty / Certifications

Manufacturer Warranty

6 years on horizontal surfaces, 10 years on vertical surfaces

Questions & Answers

98Questions
caret
Q:Can this be used on a painted deck to get a shiny look>
by|May 28, 2024
1 Answer
Answer This Question

A:  No, Seal-Once should only be applied to clean, bare wood. Seal-Once Marine is not suitable for application over another paint, stain, or sealer.

by|May 28, 2024
    caret
    Q:Do the 45 degree and 95 degree optimal temperatures refer to optimal application temperatures or in use temperatures? I'm assuming application but want to verify. Will the finished product withstand -5 degree F to 115 F temperatures without degradation?
    by|May 27, 2024
    1 Answer
    Answer This Question

    A:  Yes, the optimal temperature refers to product application. Once the Seal-Once is absorbed into the wood the temperature is immaterial.

    by|May 28, 2024
      caret
      Q:Will this product burn my feet walking barefoot around my pool
      by|May 27, 2024
      1 Answer
      Answer This Question

      A:  Seal-Once does not provide a heat barrier.

      by|May 28, 2024
        caret
        Q:When its time to put a new coat on do you have to strip the old application first?
        by|May 18, 2024
        1 Answer
        Answer This Question

        A:  Instructions for re-application of Seal-Once after it has weathered and no longer repels water: Before you re-apply Seal-Once water proofers, you must clean and brighten the surface using Seal-Once All Wood Cleaner. Apply the cleaner as directed. Let it sit on the surface for around 20 minutes. During this time, agitate it with a scrub brush. The scrub brush will help immensely. Do not allow the cleaner to dry on the surface. Keep it wet. Rinse off the cleaner with a power washer. Keep the wand about a foot away from the surface. You don’t want to scar the wood. After it is clean and dry, (2 days), you can apply the required 2 coats of Seal-Once water proofers with a brush. If you spray or roll, you must immediately back brush the area. Brushing is very important. You begin at the end of two boards. You will brush to the other end of the same two boards. Now apply a second coat to the same 2 boards. Apply the second coat within 5-15 minutes of the first coat. The second coat must be applied while the first coat is still wet. (Wet on wet application). Push the product into the wood with the brush. Spread it out evenly. Do not allow it to puddle. Wipe off any excess with a rag.

        by|May 24, 2024
          1 found this answer helpful
          Showing 1-4 of 98

          Customer Reviews

          4.7 out of 5

          • 4.7 out of 106 reviews
          • 80% recommend this product
          Filter by:
          Showing 1-10 of 106 reviews
          Day after application
          Happy so far, ordered more for the rest of the deck. One gallon allowed two good coats on a little less than half of a 16'x16' deck. Applied with Sprayer, spread with Applicator pad
          by
            • Recommended
            4 found this review helpful
            Water beads up great. Best applied with a sprayer and...
            Water beads up great. Best applied with a sprayer and then back brushed with pad. Product is thin and second coat must be applied before the first coat is dry. I don’t think I waited more than 20 minutes prior to applying the second coat. Chose this product based upon recommendation from house/deck soft wash contractor.
            by
            • Verified Purchase
            6 found this review helpful
            Goes on thin, works great!
            Easy to work with, cleans up with water. It has the exact consistency of milk, and you'll need to wipe some drips here & there. Soaks into the wood in about 15 minutes. Be sure to apply 2nd coat after about 20 minutes - before first coat fully dries. I used exactly 1 gallon on my entire 10X14 pergola. I was surprised at how much it covered. Had first rain today, and it appears to be working great!
            by
            • Verified Purchase
            • Recommended
            5 found this review helpful
            I have used other products on my deck and had to reseal by the end of fall. But so far this produ...
            I have used other products on my deck and had to reseal by the end of fall. But so far this product is repelling rain a whole lot better..
            by
            • Verified Purchase
            • Recommended
            5 found this review helpful
            by
            • Verified Purchase
            This review only relates to the application process as durability is unknown. This instructions advise two costs with the second cost being applied while the first cost is still damp (within about 20 minutes). I treated my deck on a cool dry breezy day which caused the first coat to dry fast…which would cause the second coat to “bead up” rather than soak in. The solution…do very small sections at a time.
            by
            • Verified Purchase
            The product did what it was suppose to...after a rain, water just beaded up on the porch.
            by
            • Verified Purchase
            Easy to apply and water beaded up right away.
            by
            • Verified Purchase
            Works well on unfinished deck. If water drops bead before sealing,wait till wood dries.
            by
            • Verified Purchase
            1 found this review helpful
            Yes it worked just the way it was supposed to
            by
            • Verified Purchase
            1 found this review helpful
            Showing 1-10 of 106 reviews

            Compare Similar Items

            current item

            Transparency

            Clear

            Transparent

            Transparent

            Transparent

            Container Size

            1 Gallon

            1 Gallon

            2 Gallon

            2 Gallon

            Stain & Sealer In One

            Yes

            No

            Yes

            Yes

            Paint/Stain Features

            Dries Clear, Low Odor, Waterproof

            Any Angle Spray, High Foot Traffic, Mildew Resistant, Moisture Resistant, Mold Resistant, One Coat Coverage, Tintable, UV/Fade Resistant, Uniform Spray Sheen, Washable, Waterproof

            Low Temperature, Mildew Resistant, UV/Fade Resistant, Waterproof

            Low Temperature, Mildew Resistant, UV/Fade Resistant, Waterproof

            Base Material

            Water Based

            Oil Based

            Water Based

            Water Based