|Actual Product Length (ft.)||8 ft||Actual Product Thickness (in.)||.75|
|Actual Product Width (in.)||5.125||Coverage Area (sq. ft.)||3.41 sq ft|
|Nominal Product Length (ft.)||8 ft||Nominal Product Thickness (in.)||1|
|Nominal Product Width (in.)||6 in|
|Appearance Board Type||Softwood Boards||Board Joint Type||Tongue & Groove|
|Features||Beadboard, Finger Joint||Finish Type||Primed|
|Moisture content||KDHT||Number Of Boards Per Pack||1|
|Manufacturer Warranty||See store for details|
A: Yes, this product is suitable for exterior projects.
A: 18 ga 2in nail gun
A: finish nails
A: finish nails i used a 18ga air gun
A: regular nails
A: I used a brad nail gun.
A: You could install this with a hammer, but it will take you a long time. I installed mine with a nail gun and tried to place the nails where they will be hidden (where baseboard or moulding would go) so I didn't have to fill/sand and paint the holes.
A: Hand nailing it will take quite some time. If you have the ability to rent a finish nailer then I would suggest that greatly. Either way Nail it through the tongue as to hide the nail holes. If you have no choice but to hand nail the boards then use at least a 6d finish nail. Good luck!
A: The product is installed with finish nails.
A: Behr Premium Plus Latex paint will work fine, brushed on or spray. Mike
A: semi gloss
A: I sprayed mine with a regular latex paint.
A: I used a white gloss latex mainly due to application in a high traffic area.
A: Premium Exterior flat latex paint applied with a good quality Chinese Bristle brush.
A: One side is bead board. The other is V Groove. Both sides are primed.
A: The back side is smooth but the manufacturer puts two labels on every board on the smooth side and you will regret the day you try to use the smooth side since it is so hard to remove the labels. It looks good once you get the labels off but I can testify to the fact you don't want to tackle it unless it is only a few boards or you love scraping and cleaning.
A: Backside has a V-Groove look. I will be using this product very soon. I will be installing on reverse side as shiplap, and beaded side on ceiling. I will add pics as soon as I complete the project
A: Its a solid 6 in wide ship lap look with a V groove in between where the tongue and groove engage. This is how we installed it as well. We love it!
A: We are using it for a faux ship lap on the back side and it looks great! Only con is that there are two stickers on the back that have been hard to remove. Great product